TZONE DIGITAL TZ-AVL11 User manual

TZ-AVL11 User Guide
V1.0.6 Nov 28 ,2016
TZ-AVL11 User Guide
Automatic Vehicle Location
(TAG06/TAG06B)
V1.0.6

TZ-AVL11 User Guide
V1.0.6 Nov 28 ,2016
Catalog
1.1 Product overview.................................................................................................................. 3
1.2 Introduction........................................................................................................................... 3
1.3 Key Feature........................................................................................................................... 3
1.4 Accessories............................................................................................................................ 4
1.5 Specification..........................................................................................................................5
1.6 Outside feature...................................................................................................................... 6
1.6.1 Socket and Switch......................................................................................................7
1.6.2 TAG06 and TAG06B parameter................................................................................ 7
1.6.3 I/O ports......................................................................................................................9
1.6.4 Connect Relay to control the Car Oil/Power. ( port 1/2).........................................10
1.6.5 Connect to the fuel sensor to detect the fuel.(port 3)...............................................10
1.7 Getting Start........................................................................................................................ 11
1.7.1 Hardware Features................................................................................................ 11
1.7.2 Light and Button Functionality............................................................................. 11
1.7.3 First Use................................................................................................................... 12
2.1 Use the command to set device by SMS.............................................................................12
2.1.1 change the deivce password.....................................................................................13
2.1.2 Use the GPRS function............................................................................................ 13
2.1.3 Set into sleep function..............................................................................................14
2.1.4 Set RF function........................................................................................................ 17
2.1.5 Other useful commands........................................................................................... 18
3.1 The format of the GPRS......................................................................................................19
4.1. SMS instruction list............................................................................................................19
5.1. Q&A...................................................................................................................................25
6.1.Update the firmware of the AVL.........................................................................................26
IAP Update User Guide.....................................................................................................26

TZ-AVL11 User Guide
V1.0.6 Nov 28 ,2016
1.1 Product overview
AVL11 is a receiving terminal and gateway products of temperature and humidity
monitoring system; this product has a positioning function with the installation of GPS
tracking, usually used on logistics vehicles and other modes of transport or placed in the
warehouse and other fixed places; this product with 433 wireless mode which can receive a
plurality of TAG06/TAG06B sensors to collect temperature and humidity data, then upload
data to the server through GPRS; and it has the characteristics of long distance transmission,
high stability and fast data transmission, and the appearance of fashion,and easy to install,
to monitoring temperature and humidity when change location information or real-time
monitoring of warehouse and other fixed places,users can check data changes from real-time
remote monitoring of temperature and humidity information in storage cold chain logistics.
1.2 Introduction
1.3 Key Feature
Internal Polymer Lithium Ion Battery in the AVL
Software Function
Single location
√
Tracking
√
Over-speed alarm
√
Geo-fence alarm
√
Wake up alarm
√
Sleep alarm
√
SOS alarm
√
GPRS Function
√
Heartbeat function
√
I/O ports trigger alarm
√
Low battery alarm
√
Exterior battery cut off alarm
√
Inner Lithium battery
√
Charged by exterior DC
√
Tremble Senor-based
√
Anti-theft Alarm
√
Received 433 TAG
√
Digital input
√(1 ports)
Digital output
√(2 ports)
Analog input
√(1 ports)

TZ-AVL11 User Guide
V1.0.6 Nov 28 ,2016
Can be charged by exterior DC 11-36 V
Can be charged by USB 5V
Exterior battery cut off alarm
Support mini USB port or OTA to update firmware
Low power consumption
Over-speed alarm
Geo-fence alarm
Low power alarm
With GSM/GPRS module and GPS chipset
Support single location and continual tracking
Can Real-time tracking your vehicle via map on PC
GPRS function, receiving position data and alarm data on Server
Anti-theft alarm, support alarm when someone tremble your car once you
park it and send an alarm report via GPRS data
Remotely detect the status of the Windows or Doors or Engine close/open
through the Digital Input sockets.
Remotely cut the Oil/Engine power through the Digital Output socket.
SOS button send out exact location for immediate rescue. After user press
SOS button in the AVL, AVL unit will send out the location and SOS alarm
to the preset number via SMS or a Server via GPRS
With 32Mbit memory, this can store about 16000 PCS data. When GPRS is
lose connection, those data will be store and send when GPRS connection is
recover.
Detect the car of the fuel.
With listen-in function.
RFID Tag receiver (note:only AA and 88 types of data containing the TAG06
ID).
Into sleep mode when without GPRS data for preset time or no shock ,wake
up the machine by the heartbeat function/sms/calling.
1.4 Accessories
Thank you for your purchase of the AVL, after you get it, please checking all

TZ-AVL11 User Guide
V1.0.6 Nov 28 ,2016
the accessories in the box:
Accessories
I/O interface Cables

User Manual CD

USB cable

Car charger(5V)

Below is Optional:
Configure Cable (Optional)

Car Charge (Optional)

If there is any part damaged or absent, please contact your dealer as soon as
possible, and if you have any questions or problems when using it, you can
contact our service center.
1.5 Specification
Feature
Characteristics
Dimension
122mm*81mm*30.8mm
Exterior Power Supply
DC 9V -- 36V
USB charge
5V
Inner lithium battery
DC 3.6V -- 4.2V/4500mh
the Built-in GSM antenna
Receive GSM Signal better
the Built-in GPS antenna
Receive GPS signal better
Power Consumption
when exterior voltage is 12V
Active mode(avg.) <100mA
Sleep mode < 2mA
Air pressure
860Kpa --1060Kpa
Position accuracy
10 --15 meters
GSM chip
SIMCOM, 4 Frequency GSM 850/ 900/1800
/1900MHZ is optional)
GPS chip
(super-sensitivity and high accuracy )
RFID Frequency
433MHZ
LED
3 LEDs indicates GSM signal, GPS signal, and
change

TZ-AVL11 User Guide
V1.0.6 Nov 28 ,2016
1.6 Outside feature

TZ-AVL11 User Guide
V1.0.6 Nov 28 ,2016
1.6.1 Socket and Switch
Hardware
Function
A. Three LED
GSM LED(Right), Power Led(Red), GPS Led(Blue)
B. USB Port
Support "USB Converter” to update firmware
C. I/O Sockets
Expanding function, as below
Note:
AVL11 does not have the switch, so need to connect internal battery or connect 11V – 36V
external power supply can be start the device
1.6.2 TAG06 and TAG06B parameter
TAG06: temperature sensor
Parameters
Characteristics
Working Frequency
433Mhz
RF Output Power
20dbm
Distance
800m(optional)
Modulation
GFSK

TZ-AVL11 User Guide
V1.0.6 Nov 28 ,2016
Operating temperature
-40~85℃
Storage temperature
-55~125 ℃
Backup Battery
750mAh /3.6V
Application Life
3 years
Weight
80g
Dimension
63mm*38mm*31mm
TAG06B: temperature&humidity sensor
Parameters
Characteristics
Working Frequency
433Mhz
RF Output Power
20dbm
Distance
800m(optional)
Modulation
GFSK
Operating temperature
-40~85℃
Storage temperature
-55~125 ℃
Storage humidty
0~100%
Backup Battery
750mAh /3.6V
Application Life
3 years
Weight
80g
Dimension
63mm*38mm*31mm
Note:
TAG ID contained in the GPRS data, you need enable 136 instructions to take effect

TZ-AVL11 User Guide
V1.0.6 Nov 28 ,2016
1.6.3 I/O ports
Interface from left to right, in accordance with the order
(1)
Digital
Output A
(2)
Digital
Output B
(3)
Analog
Input
(4)
Digital
Input 1
(5)
GND
(6)
SOS
(7)
GND
(8)
V+(9-24)
The 8 socket function is as below:
NO.
Function
I/O 1
Using a phone can set the voltage value of the digital output through
“025” instruction, high or low, by virtue of it, user can remote Control
the Car window or door close/open
I/O 2
The function is the same as I/O 1
I/O 3
AD input, Gather to the digital of voltage
I/O 4
he triggered voltage must be high, alarm type is “50”, “51”, through it ,
user can monitor the status of ignition or Car door status
*At present, most of customers use this cable to connect to the engine of car.
I/O 5
GND, use for input GND(connect SOS button)
I/O 6
When SOS Button cable is connected to GND(port 05), namely trigger,
the unit will send out a data via SMS or GPRS, alarm type is “01”
I/O 7
GND, the voltage is ‘0’, The cathode of power input socket
I/O 8
The anode of power input socket

TZ-AVL11 User Guide
V1.0.6 Nov 28 ,2016
1.6.4 Connect Relay to control the Car Oil/Power. ( port 1/2)
1.6.5 Connect to the fuel sensor to detect the fuel.(port 3)
Our AVL can get the voltage by the AD collection and according to the voltage
change to know the fuel level in the tank. because the fuel tank in different car is
different .so you need to find out the different relation between the voltage
and fuel .our AVL can collect the voltage from 0-18V.so that mean if you want

TZ-AVL11 User Guide
V1.0.6 Nov 28 ,2016
to know the fuel leave in the fuel tank, so you should work out the coordinate
relation between voltage and fuel in your server. when the GPRS data come
to the server, the server work out fuel level in the tank by analyze the GPRS
data.
1.7 Getting Start
This section will describe how to setup your AVL11 after installation.
1.7.1 Hardware Features
device
I/O interface
cable
Configure
Cable
(option)
CD
1.7.2 Light and Button Functionality
The AVL11 has three LED lights with three different colors to indicate the status of the unit.
Red LED - indicating change status
Off
No charge / the charge is complete
On
Charging
Blue LED - indicating GPS status
On
One button is pressed
Flashing ( 0.1 second)
The unit is being Initialized
Flashing (on for 0.1 second and off for 2.9 seconds)
AVL11 has a GPS fix

TZ-AVL11 User Guide
V1.0.6 Nov 28 ,2016
Flashing (on for 1 second and off for 2 seconds)
AVL11 has no GPS fix
Green LED - indicating GSM status
On
One call is coming in
Flashing ( 0.1 second)
The unit is being Initialized/Receive a text message
Flashing (on for 0.1 second and off for 2.9 seconds)
AVL11 is connected to the GSM network
Flashing (on for 1 second and off for 2 seconds)
AVL11 is not connected to the GSM network
1.7.3 First Use
Please read this manual before using your AVL11
Please read this manual before using your AVL11
4.4.1 Ensure that your AVL11 has a working SIM installed.
- Check that the SIM has not run out of credit (Test the SIM in a phone
to make sure it can send and receive SMS)
-Check if the SIM card holder is locked-
If you require the function of sending an SMS location report to the
authorized phone number when it makes a call to the AVL11, please
make sure the SIM installed supports displaying caller ID.
4.4.2 Line of the proposed machine configuration does not provide 5V
charge, because the machine will lead to the 5V power supply
configuration lines connected to the computer, configure the line
machine to run a problem, we will configure the line within the red 5V
power line cut, if your configuration still provide the 5V line, please
cut the red 5V power cord configuration line, only with the 5V USB
power supply or external power supply 11-24V
4.4.3 Check the LED
Check that the Green LED (GSM) is flashing 0.1 second on and 2.9
seconds off.
Check that the Blue LED (GPS) is flashing 0.1 second on and for 2.9
[18:20:45] 83stef 83stef: GPRS ON
seconds off.
2.1 Use the command to set device by SMS

TZ-AVL11 User Guide
V1.0.6 Nov 28 ,2016
2.1.1 change the deivce password
Notes: $$$$$$ is the password, and the default is:000000
If you want to modify the password :
The command of format:
*$$$$$$,001,@@@@@@#
Explication: $$$$$$: the old password
@@@@@@: the new password
For example: *000000,001,123456#
After you send the command of SMS to device, it will reply to your mobile
phone: Receive:’001’OK
*000000,001,123456#
2.1.2 Use the GPRS function
Notes: At first of all, make sure the SIM card insert to the device and have the
GPRS function.
Step1: Set the APN (Access Point Name )
Different network of provider have the different APN at every country, if
you don't know, pls refer to the attachment.
Format: *$$$$$$,011,APN,Username,Password#
Notes: The username and password could to be null1.
For example: *000000,011,cmnet,,#
Explication: The China Mobile’s APN is “cmnet”, and the username and
password are empty.
After you send the command of SMS to device, it will reply to your mobile
phone: Receive:’011’OK
*000000,011,cmnet,,#
Step2: Set the server’s IP & PORT
Format: *$$$$$$,015,0,IP,PORT#
For example: *000000,015,0,72.167.29.18,3308#

TZ-AVL11 User Guide
V1.0.6 Nov 28 ,2016
72.167.29.18 is our server’s IP address,3308 is the port.
If client have the server by himself, pls make sure the IP and port is correct.
After you send the command of SMS to device, it will reply to your mobile phone:
Receive:’015’OK
*000000,015,0,72.167.29.18,3308#
Step3: Set GPRS time interval
Format: *$$$$$$,018,X,Y#
X: the time interval (unit is sec),Y: the times of the data have to send by
GPRS.
For example:*000000,018,60,999#
The device will send GPRS every 1 mins and no times limit.
After you send the command of SMS to device, it will reply to your mobile
phone: Receive:’018’OK
*000000,018,60,999#
Step4: Open the GPRS function
Format: *$$$$$$,016,X#
X: close/open the GPRS function,
For example: *000000,016,1#
After you send the command of SMS to device, it will reply to your mobile
phone: Receive:’016’OK
*000000,016,1#
2.1.3 Set into sleep function
Notes: the AVL11 have not vibration function,there are only have Into sleep mode
when without GPRS data for preset time or have no shock ,Wake up the machine only by the
heartbeat function/sms/calling.
Set sleep function:
A. When the machine does not send data into sleep, the heartbeats to wake up

TZ-AVL11 User Guide
V1.0.6 Nov 28 ,2016
Step1: open the sleep mode
Format: *$$$$$$,021,XY#
X: close/open the sleep mode
Y: close/open the tremble sensor
For example: *000000,021,10#
When you want to use the sleep mode of function, make sure open the
sleep mode,don't need to enable the vibration mode
After you send the command of SMS to device, it will reply to your mobile
phone: Receive:’021’OK
*000000,021,10#
Step2:Set the sleep waiting time, not send GPRS data calculated
Format: *$$$$$$,020,X#
X: Set the wait time,unit:Second
For example: *000000,020,30#
Wait for 30 second period if there is no GPRS data, the machine goes into
Sleep
020 command waiting for sleep must set up more than 018 interval GPRS
data sent a short time, the machine will enter the sleep
After you send the command of SMS to device, it will reply to your mobile
phone: Receive:’020’OK
*000000,020,30#
For 30 seconds without sending GPRS data,machine into sleep.
Set heartbeat function wake up the deivce :
Step3: enable heartbeat function
Format: *$$$$$$,040,1#
X=1:enable the heartbeat function
After you send the command of SMS to device, it will reply to your mobile
phone: Receive:’040’OK
*000000,040,1#

TZ-AVL11 User Guide
V1.0.6 Nov 28 ,2016
Step4: Set the heartbeat interval
Format: *$$$$$$,041,60#
X=60: 60 minutes to send a heartbeat
After you send the command of SMS to device, it will reply to your mobile
phone: Receive:’041’OK
*000000,041,60#
Machine into sleep after 60 minutes will wake up the machine at a time
B. When the machine does not vibrate into sleep, the heart beats to wake up
Step1: open the sleep mode
Format: *$$$$$$,021,XY#
X: close/open the sleep mode
Y: close/open the tremble sensor
For example: *000000,021,11#
When you want to use the sleep mode of function, make sure open the sleep
mode and vibration mode
After you send the command of SMS to device, it will reply to your mobile
phone: Receive:’021’OK
*000000,021,11#
Step2:Set the sleep waiting time, not send GPRS data calculated
t: *$$$$$$,044,X#
X: Set the no vibration time ,unit:Second
For example: *000000,044,30#
Wait for 30 seconds without vibration, the machine goes into Sleep
phone: Receive:’044’OK
*000000,044,30#
For 30 seconds without sending GPRS data,machine into sleep.
Set heartbeat function wake up the deivce :

TZ-AVL11 User Guide
V1.0.6 Nov 28 ,2016
Step3: enable heartbeat function
Format: *$$$$$$,040,1#
X=1:enable the heartbeat function
After you send the command of SMS to device, it will reply to your mobile
phone: Receive:’040’OK
*000000,040,1#
Step4: Set the heartbeat interval
Format: *$$$$$$,041,60#
X=60: 60 minutes to send a heartbeat
After you send the command of SMS to device, it will reply to your mobile
phone: Receive:’041’OK
*000000,041,60#
Machine into sleep after 60 minutes will wake up the machine at a time
2.1.4 Set RF function
Step1: enable RF function（can receive TAG06/TAG06B）
Format: *$$$$$$,136,X#
X: open/close this function
X=0, open
X=1, close
For example: *000000,136,1#
Open RF function
After you send the command of SMS to device, it will reply to your mobile
phone: Receive:’136’OK
*000000,136,1#
Step2：Set the receive rate for the TAG module

TZ-AVL11 User Guide
V1.0.6 Nov 28 ,2016
Note ：All of the default TAG module receive rate is 100K, such as the
requirements of other rates, need to customize, such as no custom, please do not
use the 140 command,otherwise you may not receive the TAG06/TAG06B data.
Format: *$$$$$$,140,X#
X: receive rate for the TAG module
X=0, 1K
X=2, 2K
X=2, 10K
X=3, 38.4K
X=4, 100K(default)
For example: *000000,140,0#
Use the TAG module receive rate is 1K.
After you send the command of SMS to device, it will reply to your mobile
phone: Receive:’140’OK
*000000,140,0#
2.1.5 Other useful commands
Get current location:
*$$$$$$,000#
Get the IMEI from the device:
*$$$$$$,801#
Reboot the device by SMS:
*$$$$$$,991#
Initialization the device
*$$$$$$,990,099#
Clear the device flash
*$$$$$$,500#

TZ-AVL11 User Guide
V1.0.6 Nov 28 ,2016
3.1 The format of the GPRS
AVL11 GPRS data is hex format. The GPRS command at the same as sms command in this user
guide.
Please refer to the document AVL11 GPRS protocol
4.1. SMS instruction list.
If you want to know more about the AVL11, and design your special AVL11, you can refer to
the SMS instruction list.
$$$$$$ is user`s password, and initial password is 000000
SMS Instruction
Format
Note
1
Request one position
*$$$$$$,000#
2
Modify user password
*$$$$$$,001,@@@@@@#
$$$$$$ is old password
@@@@@@ is new Password
3
Set the time intervals of position
by SMS
The Position SMS will send to the
preset SOS number.
*$$$$$$,002,X,Y#
X ( Max 5 Digital)
=0, Stop send position SMS
=[1,60000] Time interval (Unit:
mins)
Y (Max 3 Digital)
=[1,999）times send SMS
Y=0, Disable this function
Y=999, continue send SMS
4
Set a preset phone & SMS number
for SOS button
*$$$$$$,003,0,F,CallNumber,
SMS Number#
F = 0, Disable this function
=1, Only send an alarm SMS to
the preset SMS Number
Notice :Tel Number and SMS
Number ( must <25 digits)
5
Set low power alarm
When the AVL11 voltage is lower
than the preset value,
AVL11 will send one lower
power alarm GPRS data to the
Preset Server.
*$$$$$$,004,XXX,YYY#
XXX is the low power alarm
voltage, eg: 3.8v,XXX=380
YYY is the auto shut down voltage,
eg: 3.5v,YYY=350
For example：
*$$$$$$,004,380,350#
6
Set over speed alarm
When the AVL11 speed higher
*$$$$$$,005,S,X,Y,Z#
S=1 Enable speed alarm,
S=0 Disable speed alarm.
X=[10<XXX<250] (The speed

TZ-AVL11 User Guide
V1.0.6 Nov 28 ,2016
than the preset value, AVL11 will
send one over speed alarm GPRS
data to the Preset Server.
preset value)
unit is km/h
Y is the times over speed
[10,999],unit is second
Z=[10,360],( The time interval to
send speed alarm)
unit is second.
7
Set Geo-fence alarm
When the AVL11 move out preset
scope, AVL11 will send one
Geo-fence GPRS data to the Preset
Server.
*$$$$$$,006,+lat1,+long1,+lat2,+
long2,X,Y#
Lat=[-9000.0000,+9000.0000]
Long=[-18000.0000,+18000.0000]
X=[10,360] is for time interval send
alarm message.
Y=0, Disable GEO-fence alarm.
Y=1, Into GEO-fence alarm.
Y=2, Out of GEO-fence alarm.
Note:Long1>long2&lat1>lat2
Make sure the position of north
latitude and east longitude set it
(+),otherwise set it (-)
Format:+AAAAA.BBBB
Make sure set the two position have
the same digit after comma.
8
Extend setting
*$$$$$$,008,ABCDEFG#
A=0, Disable position report
function which get position SMS by
Calling
A=1, Enable position report
function which get position SMS by
Calling
B=0, Send the SMS in Text format.
B=1, Send the SMS in NMEA
format.
C=1, AVL do NOT hung up when
one call incoming
C=0, AVL hung up after 4~5 rings
when call incoming
D=0
E=0, ADB Normal AD collect
E=1, ADB Oil collect.(The average
of two minutes to collect)
F=0, ADA Normal AD collect
F=1, ADA Oil collect.(The average
of two minutes to collect)
G=0
9
Change band
*$$$$$$,009,S#
S=0, work in 900/1800
S=1, work in 850/1900