TZUMI Tag-It User manual

Thank you for choosing the TZUMI Tag-It Bluetooth Alarm System.Tag-It chains your
easily lost & valuable belongings—such as keys, handbags, kids or pets—together with
your smartphone through the Tag-It app. Within the effective distance of 60 feet, Tag-IT
can realize the functions of anti-lost tracking, remote shutter photography and voice
recording.
The effective distance of Tag-It is 60 feet in open range without barrier. With this device,
your belongings, kids and pets won't leave your attention any more.
Tag-It uses CR2032 Lithium Coin Battery, which is easy to replace, and works for
almost half a year.
Switch On/Off
Switch On: Press and hold the button on Tag-It for 3 seconds until you hear the “Beep”
twice.
Switch Off: Press and hold the button on Tag-It for 3 seconds until the long “Beep”
sound.
Connection
Tag-It will connect the smartphone automatically when powered on; if it shows
"disconnected" on the app, click the "Connect" button to connect it again.
Click the button “放大镜图片 ”to find more connectable Tag-It devices, such as car
keys, bags and so on. (Note: Clicking the arrow icon will activate the submenu options,
such as adding a photo or renaming and setting the ring tone.)

Press the “ ” button to enter into "Delete" submenu to remove the item which you
don' t need, or slide this item to left on "device list" interface, click “ - ”to remove it out of
the device list.
Do Not Disturb Mode
On the "Setting" interface, switch "Do not disturb" on, alert function of all devices will be
shut down.
On the "Device" interface, enter into submenu "Tag-It" item, click "Anti lost" to set a
unique feature for alert function for each Tag-It, such as shut off the alert for one of
connected Tag-It.

Setting for Alert
As shown in the image
1. Double click the button on Tag-It to trigger the alert on the smart phone. Double click
the button again to stop alert on smart phone.
2. Click the red flash button to stop the phone alert.
3. Click "Alert" button, Tag-It alerts, and click the "Stop Alert" will stop the alert from
Tag-It.
Photograph
As shown in the image
Alert Press the "Photograph" button, it will turns to camera mode.
1. Press top right and left to set the flashlight and camera:

IMAGE 这个图片请参考原版
2.Press the button on the right button, you can set for burst shooting and interval timer
shooting. Press the button on Tag-It once, it works as a remote shutter to take photos.
For burst shooting and interval timer shooting. Press the button on Tag-It once, it works
as a remote shutter to take photos.
IMAGE 这个图片请参考原版
Location
As shown in the image
Location list: when you pack your car, press the button on Tag-It, it will marks your
current location on the map. Press the "Location list" and you will find where your
vehicle is with easy tracking when you leave any big or underground parking lot
Lost history: If the Tag-It is lost, A pin-drop will be marked automatically on Map to tell
you the site it was lost. Just press "lost history" to find the record.
Remark: To delete the list, just scroll left the list and press the "Delete" menu
Setting

In order to experience the functions of Tag-It better, enter into the setting menu to set
for your Tag-It.
As shown in the image
APP password setting
Map switch: choose Google map or Baidu map
Double click setting: setting for alarm or voice recording
Record list: The recorded voice would be stored under this state.
Simply press Play button to play/pause and scroll left the list to delete it.
IMAGE这个图片请参考原版
Version: Version of current App
Battery replacement
IMAGE 这个图片稍后提供

Battery is in the back of the tag. Use a coin as a key and twist it to right to open the
battery cover, then replace the battery. The used CR2032 cell is easy to get in the
market. After replacement put the cover back and close it to left also with the coin.