VADA FLOW BOSS VFB-DSU-WM User manual

Quick Start Guide
Vada Flow Boss
Wall Mount Accessory Kit
VFB-DSU-WM
Scan for
set up
support

32 VADA FLOW BOSS WALL MOUNT ACCESSORY KIT VFB-DSU-WM QUICK START GUIDE
Let’s get started!
1. Remove all items from packaging.
2. Open the three poli splicing mechanism by
turning the ends clockwise as illustrated.
3. Feed the cable through the open
mechanism.
4. Connect the wiring as indicated below.
5. Lock the mechanism by tightening the
screws clockwise.
6. Slide the mechanism up.
INSTALLATION
L=30mm
L=8mm
L=30mm
L=8mm
L L
N N
1
2
THANK YOU
Thank you purchasing a Vada Flow Boss Wall Mount Accessory Kit!
Follow the steps opposite to set it up quick smart.
Screwdriver
SPECIFICATIONS
Vada Flow Boss
Digital Water
Switching Unit
VFB-DSU
COMPATIBLE VADA PRODUCTS:
ADDITIONAL PRODUCTS REQUIRED FOR INSTALLATION:
Wire cutters Wire stripper

7. Tighten the central mechanism.
8. Screw the ends in.
9. Tighten the screw ends.
10. Place the wall mount on a solid flat
surface. Using the screws provided drill
into the surface.
11. Mount the digital switch.
Congratulations, your Vada Flow
Boss Digital Water Switching Unit
is now securely mounted.
1
2
INSTALLATION