Venstar 2050 User manual

VENSTAR
VENSTAR2O5O
User Manual

Table of Contents
1,1 Appearance and Keys
1.2 Basic Operation
1.2.1 Switch On
1.2.2 Unlock the screen
1.2,3 lock the screen
L.2.4 Switch Off
1.2.5 Battery charging
1.2.6 Switch input methods
1.2.7 Use TF-Card
1,2.8 Connected to the computer
1,2.9 Browse the file in the device
1.2.10 Startup programs
1.2.11 Close p.ograms
1.2.12 Screen operation
1.2.13 Homescreen
1.214 Screen gestures
1.2.15 Security settlng
1.2.16 Displaysetting
1.2.17 HDMI setting
1.2.18 Wireless And Network Settings
1.3 Technical specifications
:

Thanks very much for purchasing our MID product! Before using this product,
please read the manual carefully. We will consider that you have read this manual
when you use this product
The functions information ofthis manual is subiect to the product itself; we will
keep developing new functions. The information in this manual is subject to
change without any prior notice
The Company will not be responsible for any loss of personal data and damage
caused by incorrect operation of software/Hardware, artificial damages,
replacement of batteries or any other accident. To avoid loss of your data, please
backup your data to your computer at any time.
we cannot control any dispute from users' misunderstanding or incorrect
operation against the manual, the Company will not take any relevant
responsibility for any accidental loss potentially occurring in the process of using
this manual.
Please do not repair it by yourself, otheMise, we will not provide you with
after-sale seruice. Preface
Dear Customers,
Thanks very much for purchasing our product! This device is built-in high
performance Wifi receiver module, supporting external 3G USB-DONGLE wireless
network card, turning on the broadband wireless networks, breaking through the
restraint of network cable; it will bring you into the portable media player world
and fulfill your entertainment needs. lt also support picture browsing, E-book
Reader, games, online chat and other functions, various settings will fully show
your individuality. Safety Notices
Please do not let the player fall or rub or compact with hard ob.iects during using,
or it may cause surface scratch of the player, battery loose, data lose or damages
of other hardware.
Never let this product expose to the humid environment or rain as the water
leaked into may disable it to the extent beyond maintenance.
You are recommended not to use the headset with large volume continuously,
please adjust the volume to the size of appropriate security and control the using
time to avoid the damage to your hearing, as excessive volume will cause
pdmanent hearing damage.
Please do not cut off the power abruptly during software update and download,
or it may cause date loss and system error.
Please don't turn on the device where the wireless equipment is forbidden or
when the usage of the device will cause interference and danger' Please observe
any relevant restrictions.
Please use original accessories and batteries, do not use incompatible products.
Please don't use the device in gas station or nearby the fuel and chemicals.
Please don't use this product when you are driving or walking in the street, or it
may cause an accident.
Please do not scrape the TFT screen, it may be damaged and can not be display
anything.
Never clean the device with any chemicals and detergent, or it will damage the
product surface and corrode the spray paint.
INsIDEiIHE Box
lre
FUSB CABLE
Venstar Tablet
HOTG CABLE
=il
mh(
TABLETCHARGER

Packing List
No Components Quantity
LMID Device
2 USB Cable
3User Manual 7
4Adapter 7
5Warrantv Card 1,
Attention: Accessories are subject to the real products and change without notice
l Overview
l.lAppearance and Keys
o13 12 12
1.2 Basic Operation
1.2.1 Switch On
When the device is in the OFF mode, press and hold ,,power,, key for 3 seconds to
enter the Android startup progress bar, then you can enter to the system desktop.
1.2.2 Unlock the sffeen
Please press and ar"e the E icon to the E, tf,"n th" LCD will unlocked
When the device is in the ON mode, press the "POWER" key shortly, the system
will lock the screen and enter the save power mode. Then the screen is OFF but
the system will still operational.
1.2.4 Switch Off
When the device is in the ON mode, press and hold the ,,POWER,, key for 3
seconds, the screen will display the power off interface, choose the power off item
to confirm, the system will shut automatically.
1.2.5 Battery Charging
lnsert the micro port of the battery adapter into 22OV AC slot on the device, and
connect the other side with the power socket. Then, you can charge the device.
lNote] This device is not recommended to use USB interface to charge, please
must use the special power adapter for charging. you should charge the battery
for at least 8-L2 hours to make sure the battery is fully charged at the first time.
On charge the Power indicating lamp of the device is in high light blue color, the
desktop icon ofthe U"tt"ry E keep rolling which shows it is connected to the
device.
1.2.6 Switch lnput Methods
The device support handwriting, number, letter, pinyin etc. switching follow:
Click any text input area of the working program interface, it will popping input
keyboard interface, as shown below:
$i
Please press and drag the
1.2.3 Lock the screen
sYmbol Name Description
7Volume+/Volume
Press the left side of the key shortly is reduce
volume function
Press the right side of the key shortly is increase
volume function
2ESC Press shortlv to return,
Front Camera 0.3 Megapixel Camera
4Power Press shortly to enter sleeping/waking up mode,
nress lons to switch ON/OFF
5Earphone iack Stereo
6HDMI HDMI Porl
7Micro USB porl Connect with PC
8Micro OTG port Connect with kevboard, driver, mouse etc
9Reset Reset kev
10 Charger Port To avoid damaging, recommend use of the special
chareins equipment
T7 TF Card TF Card Slot
72 speaker Built-in Speaker
13 Back Camera 2.0 Mesapixel Camera

wriften, please remove the write protection before such opections'
4) Major brends memory card is recommended to avoid the card is not
compatible to this device.
1.2.8 Connected to the ComPuter
on*J rn" ou," line connect to the compute, the other end connect the usB
port of the device, select "settings > Developer options > UsB debuggine"' the
device will connect with computer, and you can copy files to the device
Prut, E
below: then it will popping "lnput Method" switch interface' as shown 1
I^
Inputlanguages
Android k&bard *sinqs
Select the input method you want here
It'loteA] nter newty install input method' you should "settings>Language &
inprtrrrYsoaRo a INPUT METHoDS", then you can use'
1.2.7 Use T-Flash Card
lnsert T-FLASH card
lnsert the T-Flash card into the slot in direction of the device's bottom shell until
you hear a sound of click.
Browse files in the memory card
ln this MID device, you can view and use the needed files in catalogue of
"MENU">"File manager"> "SD Card"'
1) Remove T-Flash card
close all open files from the T-Flash, then enter into "MANU>"SETT|NGs">"TF card
and & device storage", click "Unmount 5D card"' system will prompt that TF card
was removed safely. Tap with your fingertips to the pop-up T-Flash card'
i*;"j ;" not inse;t the T-FLASH card by force; this card can only be applied in
one direction
" li o" ""i *r.ve the TF card before unmounted it' or the card may be
damaged.
3) lf the memory card is write-protected' data will not be formatted and
1.2.9 Browse the file in the device
Click " Explorer" E, vou."n '"" the fites in the device
\

I
1.2.10 Startup Programs
Click all the application icon you want to start and it can switch on.
1.2.11 Close Programs
Press the icon I continuously or the "ESC" key, the device will close the active
program. You can also use the corresponding function in the management
currently running appllcations to close the program
1.2.12 Screen Operation
4.Zoom in and zoom out: ln applications which support zoom gestures, such as
photo, lE browser, mail and map etc. you can zoom in or out the screen contents
by opening or closing your two fingers.
5. Rolling: In applications which support rolling gestures, such as photo, lE browser
mail and map etc. you can scroll the screen contents by sliding your fingers on the
screen. lf you want to stop the rolling screen, you just need to touch it.
1.2,13Home Screen
6. Switch home screen
In the home state, you can change the home interface by slidlng your fingers on
the screen quickly.
T.Custom Home Screen
Press the blank area on the home screen interface for a few seconds, it will appear
"Choose wallpaper from" menu, then you can set the home screen.
8.Move application icons in screen
Press the icons of applications you need to move for several seconds, it will enter
into the moving model (the icon of application will be turn big), then drag the icon
to desired position directly.
9.Move application icons screen to screen
Press the icons of applications you need to move for several seconds, and you can
drag the icon to the left side or right side.
10.Delete applications
Press the icon of application you need to remove for several seconds, drag the
icon to "x" (when the icon was turn bi8, the bottom of screen will appear "x", then
you can delete the application.
1.2.14Screen Gestures
1)click
When you need to input by the on-screen keyboard, you just need to select
applications or press the button on the screen, then click the items..
2)Press
When you want to start the available options of a project(such as web page link),
you only need to press the Project.
3)slide
Sliding on the interface with your fingers to make vertical or horizontal dragging
action
4)Drag
Before you start dragging, you must press the items with your fingers, and can not
let fingers leave the screen before dragging to the desired position
5)Rotation
Changing the screen orientation by rotating the device laterally.
1.2.15 Security
You can set the unlock pattern, each time you open or wake your MID device, you
must draw pattern to unlock the screen. ln "settings>Security>Screen lock", it
support manV unlock ways. "slide,Face Unlock,Pattern,PlN,Password".

lf use the "pattern,,, as below
Al you must ensure the connection when you draw the unlock
B) click "Continue" and draw again to confirm it
screen, sleep, font size of the screen.
1.2.17 HDMI Setting
lnset HDMI cable into HDMI slol , than you can transfer ima8e and voice to the
1.2.18 Wireless And Network Settings
A) Use WiFi
Click "Settings>Wi-Fi", turn on the wifi, the device
network in the right interface. will find available wireless
C) Click "confirm" to complete unlock pattern designing.
D) Each time you open or wake your MID device, you must draw pattern to
unlock the screen.
1.2.16 Display Setting
Click "Settings > Display,,, you can set the brightness, wallpaper, Auto rotate
11 12

1.3 Technical specifications
Sire 1263-W156'H10.5(mm)
Weight 0.56KG
TN Display 10.1 inch 1024*600
PC lnterface High speed Micro USB
OS Android 4.2
Hard Drive Capacity 8GB
Svstem Memory 1GB
Capacity Expansion T Flash kart 32GB{max)
Music Function Format MP3, WMA. WMV, OGG. APEetc
20Hz-2OKHz
Video Function Format MKV- AVI- RM. MP4etc
Max. resolutions 1920x1080
Screen Ratio 4: 3, 16: 9. fullscreenforoptional
Photo Browse lPG, BMP. JPEG, GIF etc
Support 8O2.11b/e/n
T'iJt'ittion tr.*rorbo.
Work Freauencv 2.4GHz
Select the desired wireless network, the system will directly connect the network
or popup the password input window according to network access security
settjngs. Please consult your wireless network administrator for the password.
B)Use 3G internet
This device supports the 3G wireless lnternet access. lnsert the 3G USB_ Dongle
into the USB-Host port, it will connect with the lnternet after search the 3G signal;
lNotel Open "SETT|NG>Wt-Ft>WtRELESS AND NETWORK>MORE>3G SUppORT
INFROMATION" and you can see 3c support list.
Frequenc
Camera Function Front 0.3MP Camera; Back 2.0MP Camera
Working
Temperature
Languages a- -3:: E-: i.n