GENERAL SAFETY
1. All electrical work must be done in accordance with all applicable electrical codes by a qualified
electrician.
2. Prior to wiring ensure the power supply is locked in the OFF position and that the motor
nameplate voltage matches the supply voltage.
3. Do not install or operate this fan in an environment where combustible materials, gases or
fumes are present.
4. Caution: the fan contains rotating parts and electrical service. Appropriate safety precautions
should be taken during installation, operation and maintenance.
5. Before starting the unit, ensure the wheel rotates freely.
6. Check and tighten where necessary all nuts, bolts & set screws prior to fan start up (as some
may have loosened during shipment).
7. Follow all applicable national, state/provincial and local codes, all of them will supersede this
manual.
8. Failure to follow the safety instructions in this manual may cause serious injury or death due
to electrical shock or high speed rotating parts.