VEOS SK-P500 AI Series User manual

CONTENTS
Feature (SK-P500 AI SERIES)
Warning & Caution
Warning
Caution
Configuration
Accessories
Wall mount ( ow to install 1)
Wail mount ( ow to install 2)
Ceiling mount ( ow to install 1)
Ceiling mount ( ow to install 2)
Function (SK-P500 AI SERIES)
Dimension (Wall mount)
Dimension (Ceiling mount)
Specification (SK-P500 AI SERIES)
Troubleshooting
Warranty card

FEATURE (SK-P500 AI)
1. Long visible ra n ge a t night.
(50m Max. indoors, 40m Max. outdoors)
2. You can select the level of LED ON/OFF and fi lter change according to Lux as
follow.
Level 1
Level 2
Level 3
LED
ON
8Lux
5Lux
3Lux
LED OFF
18Lux
15Lux
13
Lux
In case of selecting "Level2"
- LED turn on: under 5 lux automatically
- Filter changed into B/W mode at 5 lux, 2 seconds afte r becoming 5 lux.
- Filter changed into color mode at 15 lux 5 seconds afte r becoming 15lux,
3. This camera adopts split glass technology to prevent IR light reflection.
4. This camera has vari-fo cal IR lens to prevent defocusing under IR lighting.
5. IR cut filter is removed at night to receive 100% light.
6. This product can match for any circumstances very well.
7. This product is suitable for 24 hours surveillance with optical multi-coating
f i l t e r according to IR LED and CCD.
8. This product is weather proof to resist rain, snow and other weather factors.
(IP65)
9. This product is made of corrosion-free surface to resist rust and corrosion for a
long time.
10. Sun visor of this product can help the camera get the picture c lea rly .
11. D&N mode, Mir r or , P h a s e s h if t , BLC, ALC/ELC, FLK, Color bar chart, AGC
functions are control lable from outside by OSD menu.
12. Power & video cab les are concealable (Cable throu gh b r a c ke t) .
13. This camera adopts 3-axis bracket to install on the ceiling and wall.
14. You can connect 24V AC or 1 2 V DC regardless polarity. Line-Lock function is
available when you use 24V AC power supply.
15. This camera supports the advanced high resolution (550 TV Line- Color) by Q1

DSP of SONY.
16. You can adjust the level of IR LED according to the circumstances,
17. A heater enables the camera to keep the proper operation at low temperature.
- eater ON/OFF temperature.
ON
OFF
1st
eater
23
o
C
28
o
C
2nd eater
5
o
C
10
o
C
*ON/OFF point of heater is subject to environment.
18. A fan enables the camera to keep the proper operation at high temperature.
(option) -Fan ON/OFF temperature.
ON
OFF
Fan
45
o
C
40
o
C
*ON/OFF point of fan is subject to environment.

WARNING & CAUTION
- Follow the instructions -
Information
Read this user guide carefu l ly before any installa tio n for safe oper at ion of
product.
Indicating the possibility of serious injury or death.
Indicating the possibility of injury or material loss.
* This camera should be used only for the security surveillance.
Please follow below instructions for safe use.

WARNING
- Please study the instruction manual before
your applications and keep it for your future
reference.
- Do not flash LED light directly on the eyes
when LED’s are on.
- Do not install the camera on a unstable
surface. It will cause falling or other hazards.
- Do not use improper power, it could cause fire
or electric shock.
- Do not disassemble or re-model the camera, it
could cause fire, electric shock or other
hazards.
- Stop using the camera when you find a
malfunction like smoke or unusual heat, it
could cause fire or electric shock.

CAUTION
- Do not adhere dangerous articles to the camera
- Do not leave the unit along an unstable stand
or table.
- DC power cable or Video cable should be always loose. Do not
keep the cables tight or twisted.
- Use the camera unit within given temperature and e le c t r i c it y
limit.
- Use 24V A C or 12V DC, 1.5A regulated
power supply.
(Supply 24V AC to dual voltage version only)
- Make sure that installation should be done by qualified
service person only.
- Do not disassemble the unit by yourself. When there is problem
with the unit please contact after- sa le service center or the shop
where you bought.
-Stop operating and separate connector from the unit if below
cases happen.

1)When power connector or video connector is broken.
2)When body is broken and dropped.
3)When it is not operating though it is set correctly by the
manual.
If you meet any strange cases please call the shop where
you purchase .
If the pro uct is to be put out of operation
efinitively, take it to a local recycling plant
for a isposal which is not harmful to the
environment.

CONFIGURATION

ACCESSORIES

WALL MOUNT ( ow to install 1)
1. Make a hole of 030mm in diameter for passing cable.
2. Using the mount hole plate, drill four holes on the wall.
3. Insert the anchors.
4. Fix the screws.

WALL MOUNT ( ow to install 2)
1. Adjust horizontal angle.
1) Loosen a bolt to adjust horizontal angle of the camera.
2) Use the WRENC to tighten a bolt after adjusting the camera.

CEILING MOUNT ( ow to install 1)
1.Make a hole of 030mm in diameter for passing cable.
2.Using the mount hole plate, drill four holes on the ceiling.
3.Insert 1he anchors.
4.Fix the screws.

CEILING MOUNT ( ow to install 2)
1. Adjust horizontal angle.
1) Loosen a bolt to adjust horizontal angle of the camera.
2) Use the WRENC to tighten a bolt after adjusting the camera.
* Twist a bolt counterclockwise once or twice.
* Adjust horizontal angle.
* Use the WRENC to tighten a bolt after adjusting the
camera.

CEILING MOUNT ( ow to install 2)
2. Adjust vertical angle
1) Loosen a bolt to adjust vertical angle of the camera,
2) Use the WRENC to tighten a bolt after adjusting the camera.
*Twist a bolt counterclockwise once or twice.
*Adjust vertical angle.
* Use the WRENC to tighten a bolt after adjusting the camera.

FUNCTION (SK-P500 AI)

FUNCTION(SK-P500 AI)
• Camera function setting
Factory Setting
1. 12V DC Input * Display for factory set will last for 5 sec
* ow to set OSD menu
- ENTER: Move to next menu
- LEFT: Move to left
- RIG T: Move to right
2. 24V AC Input
* OSD color
- NTSC: yellowish green
- PAL: sky blue
OSD Menu Description
1. Day & Night: Day & Night mode Fixed at Day mode (LED OFF)
Fixed at Night mode (LED ON)
Level (Filter change & LED ON/OFF) selecting mode.
Level 1: 8/18 Lux (D-N / N-D)
Level 2: 5/15 Lux (D-N / N-D)
Level 3: 3/13 Lux (D-N / N-D)
2. Mirror
Normal Image (Default)
Reverse Image
3. Phase
Not controllable at 12V DC Input (Internal Sync.)
Phase controllable at 24 V AC Input (Line-Lock)
Internal Sync mode at 24 V AC Input
4. BLC
Normal Image (Default)
BLC ON (Level selectable)
5. ALC/ELC
ALC MODE (Default)
ELC MODE
6. FLK
FLICKERLESS OFF (Default)
FLICKERLESS ON
-> NTSC: 1/100 sec, PAL: 1/120 sec
7. Chart: Color bar Chart mode
Normal Image (Default)
Color bar chart mode selection:
-> orizontal: orizontal Color bar chart
-> Vertical: Vertical Color bar chart
8. AGC AGC control mode (Default: middle)
-> Low: 19 (dB) max
-> Middle: 22 (dB) man
-> igh: 25 (dB) max
9. Turbo AGC Normal Image
Turbo AGC MODE (Default 2)
At low luminance condition (B/W mode only)
brighten the scene max 2 times
RESET Menu
RESET Push "LEFT & RIG T" buttons for 3 sec to set the factory
default
• Camera function setting

DIMENSION (Wall mount)

DIMENSION (Ceiling mount)

SPECIFICATION (SK-P500 AI SERIES)
MODEL NO SK-P500 AI SK-P500 XAI
Type Day & Night Color Camera (With IR Illuminator)
Image Sensor 1/3" COLOR SONY SUPER AD CCD 1/3" COLOR SONY EX-view AD CCD
Effective Pixel 768 ( ) x 494(V) PIXEL (NTSC)
752( ) x 582(V) PIXEL (PAL)
Cell size 6.35( ) x 7.4(V) (NTSC)
6.5( ) x 6.25(V) (PAL)
Horizontal Resolution Color : 550 TV-LINE, B/W : 600 TV-LINE
TV Type NTSC, PAL
Sync. Type Internal / External (Line-Lock)
Scanning System 2:1 Interlace
Scan. Freq. (HOR.) INT : 15.734 K z(NTSC), 15.625 K z(PAL)
L/L: 15.750K z(NTSC), 15.625 K Z (PAL)
Scan. Freq.(VERT.) INT : 59.94 z (NTSC), 50 z(PAL)
L/L: 60 z(NTSC), 50 z(PAL)
Vi eo Output 1,0Vp-p(Sync, Negative) Termination 75 Ohms
Gamma Characteristic 0,45 Typ.
0 Lux(40M ~ 50M Range) : LED ON
Min. Illumination
0.05 Lux(F/1.2) : LED OFF 0.01 Lux(F/1.2): LED OFF
S/N Ratio 45dB over (AGC OFF)
Mirror On / Off
Flicker less(FLK) On / Off
IRIS Auto Iris
Day & Night function Automatic (Selectable)
Reverse polarity protection None polarity
External Control Yes
Shutter Spee
(Electronic) 1/60 - 1/100,000 second(NTSC) [at ELC Mode]
1/50 -1/100,000 second(PAL) [at ELC Mode]
Test illuminant area Average teal illumination by front view
Power Supply 12V DC/ 21V AC DUAL VOLTAGE
Consumption Current Max. 950mA
Operation Temp -20
o
C ~ 50
o
C (with Fan: -20
o
C ~ 60
o
C)
Preservation Temp -30
o
C ~ 60
o
C
LED 30 PCS
LENS Vari focal Auto Iris Lens
Dimension 79(W)X 77( ) X 172(D) mm
Weight Approx. 1.5kg
* The specification is subject to change without any prior notice to improve the quality.