Verilux HappyLights Touch Plus Operating instructions

HappyLight® Touch Plus
LED Light Therapy Lamp
Model: VT42*
How to Use HappyLights®
at Coquitlam Public Library

CONTENTS
Important Safeguards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2–3
Setup ....................................................................4–5
How to Use ...............................................................6–9
Controls...............................................................6–7
Positioning .............................................................. 8
Customization ........................................................... 8
Wall Mount Option ....................................................... 9
Device Pretest............................................................... 9
Establishing a Daily Routine .................................................. 10
Features and Benets ....................................................... 10
Care and Cleaning .......................................................... 11
Troubleshooting ............................................................ 11
Technical Specications...................................................... 11
DANGER
To avoid electrocution, do not operate this device near water.
2

READ ALL INSTRUCTIONS BEFORE USING
IMPORTANT SAFEGUARDS
WARNING
• Close supervision is recommended when these lamps are used by or near children, or others who
may not understand the need for these precautions.
• To prevent risk of shock or personal injury when cleaning the lamp, make sure you have turned
o and unplugged the lamp and allowed sucient time for the lamp to cool.
• Do not shorten or cut the power cord.
• Certain medications (e.g., anti-depressants) and diagnosed mental health conditions may induce
light sensitivity, which may result in discomfort, hyperactivity or hypomania. Consult with your
healthcare provider before using this product.
• If you have a pre-existing eye condition or are at risk for developing Age Related Macular
Degeneration or other eye conditions, consult with your healthcare provider before using this
product.
• Some people experience light sensitivity to bright light or upon over-exposure to bright light.
Discontinue use if you experience any discomfort.
CAUTION
• This lamp is for indoor use on a hard surface (e.g., a table or desk) only.
• Do not operate this lamp if it has been damaged in any way.
• Do not disassemble. There are no user-serviceable parts in this lamp.
• Use only the power adapter supplied with your lamp. If other power plugs, cords or connectors
are used, damage to your lamp or power adapter may occur.
• This lamp may cause interference with radios, cordless telephones or devices that use a wireless
remote control, such as televisions. If interference occurs, move the lamp away from the device,
plug the lamp or the device into a dierent outlet or move the lamp out of the line of sight of
the remove control receiver. 1
• This lamp is not for use with light dimmers, timers, motion detectors or voltage transformers.
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This Class B digital apparatus complies with Canadian ICES-005.
3

IMPORTANT SAFEGUARD—Continued
CAUTION—continued
• Use a quality surge suppressor on all electronic equipment. Voltage variations and spikes can
damage electronic components in any system. A quality suppressor can eliminate the vast
majority of failures attributed to surges. Suppressors may be purchased at electronics stores.
• Never cover the lamp or place anything on top of it when it is in operation.
SAVE THESE INSTRUCTIONS
Setup and Take Device Pretest
1. Setup—Remove Stand
• The stand is axed to the back of the HappyLight® Therapy Lamp.
• To remove stand, slide stand upward to remove from keyhole.
2. Setup—Ax Stand
• Ax stand by inserting tabs on stand into slots
at base of lamp and pressing together.
4
slots
tabs

SETUP AND TAKE DEVICE PRETEST—continued
3. Setup—Plug In
• Place lamp on a at, level surface.
• Insert power adapter plug into the adapter socket—as shown on
rear of the lamp.
• Plug adapter into a standard 120 VAC electrical outlet.
• Turn on the lamp with the power button located on the top of the
lamp.
5
power button
adapter
socket
4. Take Device Pretest
Before you begin using your HappyLight® Therapy Lamp, please take
the Device Pretest on page 9 and read through the manual for helpful
information and safety precautions.

HOW TO USE
How to Use—Controls
Touch controls have been added to your HappyLight® Therapy Lamp so that
you can customize your light therapy experience for maximum comfort and
results. For your convenience, your selections are automatically saved when
you turn o your light.
There are three controls:
HappyHue™ Colour Selector
Use the left control to choose between two dierent
hues of white light for your comfort. Each time you
touch the control, your light will rotate to a dierent
colour of white light.1
Brightness
Touch the right control to choose between three
dierent brightness levels and to nd the level that is
comfortable for you.2If you nd the brightest setting
uncomfortable, you can start with a lower setting and
work your way up to the full 10,000 lux over multiple
sessions. Increasing the brightness will deliver your
daily dose of healthy light more quickly, which results in shorter light therapy sessions.
Countdown timer
For your convenience, a countdown timer helps you keep track of the length of your
light therapy experience. You can set the countdown timer while you engage in other
activities (e.g., reading a book or emails), and your light will turn o on its own once your
light therapy session is complete.
One Hour Quick Set
To set the countdown timer for a one-hour session,
quickly touch the countdown timer control. The
illuminated ring will turn on, indicating that a one-
hour session has been set.
1. Colour temperature options are warm white (4,000K) and daylight (5,000K).
2. Brightness level options are 5,000 lux, 7, 500 lux, and 10,000 lux.
6

HOW TO USEcontinued
Customizing the Length of Your Session
You can customize the length of your light therapy session in
10-minute increments.
Step 1
Touch and hold your nger on the centre control for one second.
Step 2
Continue to hold your nger on the control and select the
length of your light therapy session. Each bar of light represents
ten minutes.
Step 3
Remove your nger when the desired time has been
illuminated. The illuminated bar(s) will pulse three times
to recognize the chosen session time and indicate that the
programming mode has been completed.
Note: If you touch the control again before the completion of the
three pulses, you will be able to continue to modify the session
time.
Stopping the Countdown Timer
Touch and hold the countdown timer control until the illuminated
bar(s) turn(s) o. If you would also like to turn o the light, press
the on-o button at the top of the lamp to turn the power o completely.
7
power button

HOW TO USEcontinued
How to Use—Positioning
Sit close to your HappyLight® Therapy Lamp with your eyes open. While staying oriented toward
the light, feel free to engage in other activities such as reading, writing, hobbies and crafts,
sewing, needlepoint, applying make-up or working at your computer or desk.
The lamp should be positioned as close as 6 inches but
within 24 inches of your face. It is most eective when it
is positioned slightly o-centre (see diagram). Note: Do
not look directly into the lamp.
The light from the lamp must be directed at your eyes,
therefore, your eyes must be open to achieve the full
benet. Note: Tinted glasses reduce the amount of light
reaching your eyes.
How to Use—Customization
Generally speaking, the closer the HappyLight® Therapy Lamp is to you and the higher the
brightness, the less time you will need to use the lamp each day to experience results.
If you do not experience desired results or are feeling lethargic, you can:
• Use the high brightness level.
• Sit close to the lamp.
• Spend more time with the lamp.
If you experience edginess or are over-stimulated, you can:
• Use the low brightness level.
• Sit farther from the lamp.
• Spend less time with the lamp.
• Take a break from using the lamp.
Please note that each person’s response to light will vary, so it is important to nd the brightness,
distance and time that are most comfortable for you.
For added customization, you can also adjust the colour using the HappyHue™ Colour Selector as
well as set the countdown timer to your desired session time.
8

HOW TO USEcontinued
How to Use—Wall Mount Option
Your HappyLight® Therapy Lamp comes with a convenient
keyhole mount on the back of the lamp. If you wish to
mount the lamp to a wall simply:
• Ax stand to back of lamp.
• Insert power adapter plug into the adapter socket.
• Align keyhole mount to suitable xture (i.e., a nail) on
wall that can hold the weight of the lamp.
• Place lamp on the xture and allow it to settle into the
keyhole mount.
DEVICE PRETEST
To help determine your degree of sensitivity to light, we recommend that you perform this pretest
upon the rst use of your HappyLight® Therapy Lamp.
Step 1 Turn on the lamp and position it about 18 inches from your face. (Do not look directly
into the lamp).
Step 2 Operate the lamp for approximately 10 minutes and turn it o. If the light has caused
any discomfort, stop using the lamp and consult a doctor. If you have no discomfort, you
may consider gradually increasing the brightness of the light, decreasing your distance
from the lamp and increasing your usage time. When you rst start using the lamp, you
should monitor the degree of any discomfort and accordingly adjust the brightness,
distance and time.
WARNING: Certain medications (e.g., anti-depressants) and diagnosed mental health
conditions may induce light sensitivity, which may result in discomfort, hyperactivity or
hypomania. Consult with your healthcare provider before using this product.
WARNING: If you have a pre-existing eye condition or are at risk for developing Age Related
Macular Degeneration or other eye conditions, consult with your healthcare provider before using
this product.
9
wall
xture

ESTABLISHING A DAILY ROUTINE
Researchers at the National Institute of Health
demonstrated that white light, in a range of 2,500
to 10,000 lux (a measurement of light intensity)
helped to reverse the symptoms of “Winter Blues.”
We all have a dierent sensitivity to light, so it is important to nd the brightness, distance and
time that are comfortable for you. We recommend that you use your HappyLight® Therapy Lamp
regularly and at about the same time each day. It is not necessary to sit in front of the lamp
continuously. You can divide the time into several mini-sessions. Continue to use the lamp daily to
feel an improvement in your mood and activity level.
When you are feeling sluggish and lethargic, increase the brightness of the light, sit closer to the
lamp and/or spend more time with the lamp. If you feel a sort of edginess, as though you have
consumed too much coee, it may be time to turn o the lamp.
Recommended time is a function of brightness and distance. Individual results may vary. Also,
refer to the warnings at the bottom of the Device Pretest section on the previous page.
FEATURES AND BENEFITS
Your new HappyLight® Therapy Lamp is a remarkable product designed to oer unparalleled
customization for maximum results and comfort. It:
• Delivers full spectrum light to your home, oce, dorm room, or apartment.
• Cues your body’s own energy enhancers to make you more alert and productive.
• Has up to 10,000 lux1to improve sleep, mood, energy, and focus.
• Is designed with a compact shape and small footprint to make it easy to place in a convenient
location.
• Provides three light brightness levels to assist in gradually increasing light intensity.
• Provides two colour temperature options to enhance user comfort.
• Uses Flicker Elimination Technology® and Optix® Glare Control to reduce eye strain and fatigue.
1. 10,000 lux at 6”
10
20 minutes
to
1 hour / day

CARE AND CLEANING
Your HappyLight® Therapy Lamp is made from high-quality materials that will last for many years
with minimum care. You may want to periodically clean the lamp using a mild, non-abrasive
cleaner and soft cloth. When cleaning, make sure you have turned o and unplugged the lamp and
allowed sucient time for it to cool.
TROUBLESHOOTING
If you are experiencing an issue with your HappyLight® Therapy Lamp, please:
• Make sure the power adapter and plug are inserted fully and securely.
• Make sure there is power to the wall outlet or try another outlet—one that is not connected to
a dimmer.
PROBLEM CHECK SOLUTION
Light won’t come on Has the plug come loose? Insert plug securely into wall outlet. Insert
plug securely into the back of the lamp.
Light ickers
Has the plug come loose? Insert plug securely into wall outlet. Insert
plug securely into the back of the lamp.
Is the lamp connected to a
dimmer switch?
Connect lamp plug only to wall outlet
without dimmer switch.
TECHNICAL SPECIFICATIONS
HappyLight® Touch Plus LED Light Therapy Lamp
Environment: Operating Temperature: -10 to 35°C (14 to 95°F)
Storage Temperature: -20 to 40°C (-4 to 104°F)
Relative Humidity: 10 to 90% non-condensing
Power: Input Power to the Adapter: 100–240 VAC, 0.35A, 50/60Hz
Input Power to the Lamp: DC19.2V, 0.65A
220V Compatible: For 220V usage, simply attach a plug adapter.
No converter is needed.
ETL Listed in Canada and the USA
11

12
coqlibrary.ca | 604-554-7323