VEVOR LI5-01 User manual

Technical Support and E-Warranty Certificate www.vevor.com/support
Induction Hob User Manual
MODEL:LI5-01
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the major
top brands and doses not necessarily mean to cover all categories of tools offered by us. You
are kindly reminded to verify carefully when you are placing an order with us if you are
actually saving half in comparison with the top major brands.

2
MODEL:LI5-01
Have product questions? Need technical support? Please feel free to
contact us:
[e-mail]
NEED HELP? CONTACT US!
This is the original instruction, please read all manual instructions
carefully before operating. VEVOR reserves a clear interpretation of our
user manual. The appearance of the product shall be subject to the
product you received. Please forgive us that we won't inform you again if
there are any technology or software updates on our product.
Induction Hob

3
Warning-To reduce the risk of injury, user must read
instructions manual carefully.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:(1)This
device may not cause harmful interference, and (2)this device
must accept any interference received, including interference
that may cause undesired operation.
This product is subject to the provision of European Directive
2012/19/EC. The symbol showing a wheelie bin crossed
through indicates that the product requires separate refuse
collection in the European Union. This applies to the product
and all accessories marked with this symbol. Products marked
as such may not be discarded with normal domestic waste,
but must be taken to a collection point for recycling electrical
and electronic devices

4
CONTENTS
BEFORE USE ....................................................................................................... 5
SAFETY INSTRUCTIONS .................................................................................. 6
INSTALLATION.....................................................................................................8
ELECTRICAL CONNECTION ............................................................................ 8
TEMPERATURE LEVEL TABLE ..................................................................... 12
TECHNICAL INFORMATION........................................................................... 14
CLEANING ...........................................................................................................14
TROUBLESHOOTING GUIDE ......................................................................... 14
NOISES MADE BY THE HOB..........................................................................15
AFTER-SALES SERVICE ................................................................................. 16
Before contacting the After-sales Service: ..................................................... 16

5
BEFORE USE
IMPORTANT: The cooking zones will not switch on if pots are not the right
size. Only use pots bearing the symbol “INDUCTION SYSTEM” (Figure
below) or enameled pots. Place the pot on the required cooking zone
before switching the hob on.
EXISTING POTS AND PANS
Use a magnet to check if the pot is suitable for the induction hob: pots and
pans are unsuitable if not magnetically detectable.
Make sure pots have a smooth bottom, otherwise they could scratch
the hob. Check dishes.
Never place hot pots or pans on the surface of the hob’s control panel.
This could result in damage.
The bottom diameter of pots or pans should be at least 10cm.

6
SAFETY INSTRUCTIONS
YOUR SAFETY AND THAT OF OTHERS ARE VERY
IMPORTANT
This manual and the appliance itself provide important safety messages,
to be read and always observed.
This is the warning / caution-safety symbol, regarding safety,
warning of potential risks to users and other
All messages relevant to safety specify the potential risk to which they refer
and indicate how to reduce the risk of injury, damage and electric shocks
due to incorrect use of the appliance. Make sure to comply with the
following:
The appliance must be disconnected from the power supply before
carrying out any installation operation.
Installation and maintenance must be carried out by a specialized
technician, in compliance with the manufacturer’s instructions and the
local safety regulations in force. Do not repair or replace any part of
the appliance unless specifically stated in the user manual.
The appliance must be earthed.
The power cable must be long enough to connect the appliance, fitted
in the cabinet, to the power supply.
For installation to comply with the current safety regulations, an
omnipolar switch with a minimum contact gap of 3mm is required.
Do not use multi-sockets or extension cords.
Do not pull the appliance’s power cable.
The electrical parts must not be accessible to the user after
installation.
The appliance is designed solely for domestic use for cooking food. No
other use is permitted (e.g. heating rooms). The Manufacturer declines
any liability for inappropriate use or incorrect setting of the controls.
WARNING: The appliance and its accessible parts become hot during
use. Care should be taken to avoid touching heating elements.
Children less than 8 years old shall be kept away unless continuously
supervised.
The accessible parts can become very hot during use. Children must
be kept away from the appliance and watched over to ensure they do
not play with it.

7
Do not touch the appliance heating elements during and after use. Do
not allow the appliance to come into contact with cloths or other
flammable materials until all the components have cooled sufficiently.
Do not place flammable materials on or near the appliance.
Overheated oils and fats catch fire easily. Pay attention when cooking
food products rich in fat and oil.
This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand
hazards involved. Children shall not play with the appliance.Children shall
not make cleaning and user maintenance without supervision.
An air switch or circuit breaker (not supplied) should be installed in the
compartment under the appliance.
If the surface is cracked, switch off the appliance to avoid the
possibility of electric shock.
The appliance is not intended to be operated by means of an external
timer or separate remote control system.
WARNING: Unattended cooking on a hob with fat or oil can be
dangerous and may result in fire. NEVER try to extinguish a fire with
water, but switch off the appliance and then cover flame e.g. with a lid
or a fire blanket.
WARNING: Danger of fire: do not store items on the cooking surfaces.
Do not use steam cleaners.
Metallic objects such as knives, forks, spoons and lids should not be
placed on the hob surface since they can get hot.
After use, switch off the hob element by its control and do not rely on
the pan detector.
CAUTION! Surface remains hot after use! Do not touch the
top plate right after removing the pot or the pan, as the top plate will
still be very hot.

8
INSTALLATION
After unpacking the product, check for any damage during transport. In
case of problems, contact the dealer or the After-Sales Service.
For built-in dimensions and installation instruction, see in below figures
The distance between the underside of the appliance and the
separator panel must respect the dimensions given in the
figure (mini. 50mm).
In order to ensure the correct operation of the product, do not obstruct
the minimum required clearance (min. 20 mm) on the worktop for
air flow out.
If an undertop oven is installed, make sure the oven is equipped with a
cooling system.
Do not install the hob above a dishwasher or washing-machine, so that
the electronic circuits do not come into contact with steam or moisture
which could damage them.
ELECTRICAL CONNECTION
Disconnect the appliance from the power supply.

9
Installation must be carried out by qualified personnel
who know the current safety and installation regulations.
The manufacturer declines all liability for injury to persons or animals
and for damage to property resulting from failure to observe the
regulations provided in this chapter.
The power cable must be long enough to remove the hob from the
worktop.
Make sure the voltage specified on the rating label located on the
bottom of the appliance is the same as that of the home.
INSTRUCTION FOR USE
To avoid permanently damaging the glass-ceramic top, do not
use:
Pots with bottoms that are not perfectly flat.
Metal pots with an enameled bottom.
CONTROL PANEL LAYOUT
Switching the hob On/Off
To switch the hob on, press the button and the cooking
zone displays light up. To switch off, press the same button
until the displays switch off. All the cooking zones are

10
deactivated
If the hob has been in use, the residual heat indicator “H” remains lit until
the cooking zones have cooled down.
If no heating zone is selected within 120 seconds of switching on, the hob
switches off automatically.
Switching on and adjusting cooking zones
Once the hob is switched on and the pan is positioned on the
chosen cooking zone, select the zone using the corresponding
button: the display shows level 0.Each cooking zone has various
power levels, adjustable with the
buttons , going from “1”: min.
level, to “9”: max. level.
Deactivation of cooking zones
Select the cooking zone you wish to switch off. Press the corresponding
button.
Press the key “ ” to set the level to “0”. The cooking zone switches off
and the residual heat indicator “H” lights up.
Child lock
This function locks the controls to prevent accidental switching on of
the hob. To activate the child lock function, switch on the hob and hold
button for three seconds; the timer shows Lo. Then the control panel
is locked.
To deactivate the control panel lock, repeat the activation procedure. The
Lo goes off and the hob is active again.

11
Timer
The timer can be used to set cooking time for a maximum of 99
minutes (1 hour and 39 minutes) for
all cooking zones.
Select the cooking zone to be used with the timer, press the button with the
clock symbol
then set the desired cooking time using the
buttons of the timer
function (see figure). After a few seconds, the timer begins the countdown.
Once the set time has elapsed, an acoustic signal sounds and the hob
switches off automatically.
To deactivate the timer, press the “ ” button to set the display showing
“00” or hold the button with the clock symbol for at least 4 seconds.
Booster
When this button is pressed, the cooktop stops at Max Power in
five minutes. Press the Button
again, and the cooktop will return to the last setting.
Please do not place hot pots or pans on the keypad! This could
cause damage.
Auto switch off
The hob will automatically switch off when you did not set cooking time,
forgot to switch off the hob, and did not operate the hob for two hours.

12
CONTROL PANEL WARNINGS
Residual heat indicator
The hob is fitted with a residual heat indicator for each cooking
zone. These indicators alert the user when cooking zones are still
hot.
If the display shows , the cooking zone is still hot. If the residual heat
indicator of a given cooking zone is lit, that zone can be used, for example,
to keep a dish warm or to melt butter.
When the cooking zone cools down, the display goes off.
Incorrect or missing pot indicator – Error code “E0”
If you are using a pot that is not suitable, not correctly positioned or not of
the correct dimensions for your induction hob, the symbol ”E0” mean “no
pot” will appear in the display (see figure at side). If no pot is detected
within 180 seconds, the hob switches off.
TEMPERATURE LEVEL TABLE
Temperature
level
Type of
cooking
Level use
(indicating cooking experience and
habits)
Max
level
9
Frying -
boiling
Ideal for browning, starting to cook, frying
deep frozen products, fast boiling
High
level
7-8
Browning -
sautéing -
boiling -
grilling
Ideal for sautéing, maintaining a lively boil,
cooking and grilling

13
6-7
Browning –
cooking –
stewing -
sautéing -
grilling
Ideal for sautéing, maintaining a light boil,
cooking and grilling , preheating
accessories
Medium
level
4-5
Cooking –
stewing -
sautéing -
grilling
Ideal for stewing, maintaining a gentle boil,
cooking (for a long period of time).
Creaming pasta
3-4
Cooking –
simmering
–
thickening -
creaming
Ideal for long-cooking recipes (rice, sauces,
roasts, fish) with liquids (e.g. water, wines,
broth, milk),
creaming pasta
2-3
Ideal for long-cooking recipes (less than a
liter in volume: rice, sauces, roasts, fish)
with liquids (e.g.
water, wines, broth, milk)
Low
level
1-2
Melting –
defrosting
– keeping
– food
warm -
creaming
Ideal for softening butter, gently melting
chocolate, thawing small products and
keeping just-cooked
food warm (e.g. sauces, soups, minestrone)
1
Ideal for keeping just-cooked food warm, for
creaming risottos and for keeping serving
dishes warm
(with induction-suitable accessory)
Power
off
0/H
Support
surface
Hob in stand-by or off mode (possible
end-of-cooking residual heat, indicated by
an “H”)
Note: The data in the table is for guidance only. The relation
between the heat setting and the cooking zone consumption of
power is not linear. When you increase the heat setting it is not
proportional to the increase of the cooking zone consumption of
power.
The power of the cooking zones can be different in some small ranges. It
changes with the material and dimensions of the cookware.

14
TECHNICAL INFORMATION
Voltage: 220 - 240V, 50/60 Hz
Max. power: 9200W
Top Left: 1800W BOOSTER 2000W
Top Right: 1500W BOOSTER 1800W
Middle: 2000W BOOSTER 2200W
Down Left: 1500W BOOSTER 1800W
Down Right: 1800W BOOSTER 2000W
Only one zone can be use the function of “Boost“ at the same time per left
or right side.
CLEANING
Do not use steam cleaners.
Before cleaning, make sure the cooking zones are switched
off and that the residual heat indicator (“H”) is not displayed.
IMPORTANT: Do not use abrasive sponges or scouring pads. Their use
could eventually ruin the glass.
After each use, clean the hob (when it is cool) to remove any deposits
and stains due to food residuals.
Sugar or foods with a high sugar content damage the hob and must be
immediately removed.
Salt, sugar and sand could scratch the glass surface.
Use a soft cloth, absorbent kitchen paper or a specific hob cleaner
(follow the Manufacturer’s instructions).
TROUBLESHOOTING GUIDE
Read and follow the instructions given in the section “Instructions for use”.
Check that the electricity supply has not been shut off.
Dry the hob thoroughly after cleaning it.
If, when the hob is switched on, alphanumeric codes appear on the

15
display, consult the following table for instructions.
If the hob cannot be switched off after using it, disconnect it from the
power supply.
Error
code
Possible Cause
Remedy
E0
No Pan or did not detect
the pan
Put on the pan
E2
NTC short or open
Contact the after-sales service
and specify the error code
E3
High voltage
Contact the after-sales service
and specify the error code
E4
Low voltage
Contact the after-sales service
and specify the error code
E5-E
8
A lot of possibilities, the
cooktop must be sent in
for repair
Contact the after-sales service
and specify the error code
C/C-C-C-C Error: automatic safety shut-off for liquid overflow
This means that the touch panel was watered with liquid.
NOISES MADE BY THE HOB
Induction hobs can make whistling or crackling sounds during normal
operation, these actually come from the pots and pans as a result of the
characteristics of the bottoms (for example, bottoms made of several
layers of material, or uneven bottoms). These noises vary depending on
the pots and pans used and the amount of food they contain, and are not
indicative of a defect of any kind.
In addition, the induction hob is equipped with an internal cooling system to
control the temperature of electronic parts; as a result, during operation
and for several minutes after the hob has been switched off, the noise of
the cooling fan will be audible.This is perfectly normal and essential for
proper appliance functioning.

16
AFTER-SALES SERVICE
Before contacting the After-sales Service:
1. See if you can solve the problem yourself with the help of the
“Troubleshooting guide”.
2. Switch the appliance off and then on again it to see if the problem has
been eliminated.
If the problem persists after the above checks, contact the nearest
After-Sales Service.
Always specify:
a brief description of the fault
the product type and exact model
your full address
your telephone number
If any repairs are required, contact an authorized After-Sales Service
Centre (to ensure the use of original spare parts and correct repairs).
Spare parts are available.
Energy saving
For optimum results, it is advisable to:
Use pots and pans with bottom width equal to that of the cooking zone.
Only use flat-bottomed pots and pans.
When possible, keep pot lids on during cooking.
Use a pressure cooker to save even more energy and time.
Place the pot in the middle of the cooking zone marked on the hob.

Technical Support and E-Warranty Certificate
www.vevor.com/support