VIA Technologies EMIO-3450 User manual

Packing List:
Packing List:Packing List:
Packing List:
EMIO
EMIOEMIO
EMIO-
--
-3450
34503450
3450-
--
-00A1
00A100A1
00A1
• 1 x EMIO-3450 Em-IO card
• 1 x Board-to-board audio cab e (P/N: 99G33-190376)
• 1 x Board-to-board 2 port USB cab e for USB connector
(P/N: 99G33-191036)
• 1 x Board-to-board 1 port USB cab e for USB interface WLAN
connector (P/N: 99G33-191026)
• 1 x Hex spacer kit (P/N: 99G44-020192)
— 6 x M3*5.5*19mm
• 1 x Quick guide (P/N: 99G51-013064-10)
EMIO
EMIOEMIO
EMIO-
--
-3450
34503450
3450-
--
-01A1
01A101A1
01A1
A of the above p us:
• 1 x EMIO-1531 B uetooth modu e kit
• 1 x EMIO-1532 GPS modu e kit
• 1 x EMIO-1530 WLAN modu e kit (US version)
• 1 x Software driver and uti ity CD (P/N: 99G64-021358-100)
EMIO
EMIOEMIO
EMIO-
--
-3450
34503450
3450-
--
-02A1
02A102A1
02A1
Same with EMIO-3450-01A1 except the WLAN modu e kit is the EU
version.
EMIO
EMIOEMIO
EMIO-
--
-3450
34503450
3450
Quick
QuickQuick
Quick Guide
Guide Guide
Guide
Key Features:
Key Features:Key Features:
Key Features:
• Compatib e with Em-ITX form factor
• Optiona support for WiFi, GPS,
B uetooth, and HSPA/WCDMA/
EDGE/GPRS using miniPCIe modu e.
• Support one SIM s ot
• Integrated 6W stereo audio power
amp ifier
The EMIO-3450 Em-IO card is specia y designed for Em-ITX form factor
mainboard. The combinations of both EMIO-3450 card and Em-ITX
mainboard is idea y suited for traffic, de ivery, KIOSK, wire ess, in-vehic e
system and f eet management app ications.
The EMIO-3450 card can support one SIM card s ot and four optiona
wire ess connectivity protoco s for proper communication through
expansion modu es. The four wire ess protoco s provide supports for
802.11b/g Wire ess LAN, B uetooth, GPS receiver and mobi e network
such as HSPA/WCDMA/EDGE/GPRS. In addition, the EMIO-3450
offers HD Audio qua ity via a bui t-in 6W stereo audio power amp ifier.
Note:
Note:Note:
Note:
P ease ensure that a items in the packing ist are present
before using this product. If any of the items are missing
or damaged, contact your distributor or sa es
representative immediate y.
1
Step 2
Step 2Step 2
Step 2
Secure the WLAN modu e in p ace with the two screws provided
with the WLAN kit.
P/N: 99G51-013064-10
Step 3
Step 3Step 3
Step 3
Insert the one end of the WLAN signa cab e into the connector on
the WLAN modu e. Be sure to have the meta contacts facing
down before inserting.
Insta ing the WLAN
Insta ing the WLAN Insta ing the WLAN
Insta ing the WLAN
modu e
modu emodu e
modu e
Specifications:
Specifications:Specifications:
Specifications:
• Bridge:
Bridge:Bridge:
Bridge:
PLX PEX8112 PCIe-to-PCI Bridge
• Mini PCIe Interface
Mini PCIe InterfaceMini PCIe Interface
Mini PCIe Interface
• 2 x Mini-PCIe s ots
• SIM s ot
SIM s otSIM s ot
SIM s ot
• 1 x SIM s ot
• USB
USBUSB
USB
• 2 x USB 2.0 ports connector
• UART
UARTUART
UART
• 1 x D-sub 9-pin UART port
• Digita I/O
Digita I/ODigita I/O
Digita I/O
• 1 x D-sup 9 pin DIO port
• Digita I/O 5V Output:
Digita I/O 5V Output:Digita I/O 5V Output:
Digita I/O 5V Output:
• 1 x 2-Po e Phoenix connector (DC output for exter-
na GPIO device)
• Audio:
Audio:Audio:
Audio:
Onboard TI TPA1517, 6W stereo audio power
amp ifier
• 3 x 3.5mm TRS jacks: Line-in, Speak-out, Mic-in
• WLAN (option):
WLAN (option): WLAN (option):
WLAN (option):
Reserved socket for EMIO-1530 WLAN modu e.
• Supports IEEE802.11b/g
• B uetooth (option):
B uetooth (option):B uetooth (option):
B uetooth (option):
Reserved socket for EMIO-1531 B uetooth modu e.
• B uetooth core specification version 2.1 comp iant
+EDR supported modu e
• GPS (option):
GPS (option):GPS (option):
GPS (option):
Reserved socket for EMIO-1532 GPS receiver
modu e
• SirFStarII base of 20-channe GPS receiver
• Support externa antenna
• 3G Mobi e Broadband (option):
3G Mobi e Broadband (option):3G Mobi e Broadband (option):
3G Mobi e Broadband (option):
Reserved MiniPCIe s ots for mobi e broadband
modu es that supports HSPA/WCDMA/EDGE/GPRS.
• EMIO-1534, Ericsson Mobi e Broadband Modu e
F3307, data rate up to 7.2Mbps down ink and
2Mbps up ink.
• EMIO-1538, Motoro a Mobi e Broadband Modu e
HTM1000, data rate up to 10.1Mbps down ink and
5.56Mbps up ink.
• Dimensions:
Dimensions:Dimensions:
Dimensions:
• 170 mm (W) x 120 mm (L)
• Operating Temperature:
Operating Temperature:Operating Temperature:
Operating Temperature:
• -20°C ~ 70°C
• With EMIO-1532 modu e: -20°C ~ 60°C;
• With EMIO-1530 modu e: -20°C ~ 60°C
• Humidity:
Humidity:Humidity:
Humidity:
• 0% ~ 90% re ative humidity, non-condensing
Step 1
Step 1Step 1
Step 1
Locate the mounting ho es for the WLAN modu e. The mounting
ho es have two standoffs pre-mounted. Then a ign the two
mounting ho es on the WLAN modu e with the mounting ho es
on the standoffs.
Step 4
Step 4Step 4
Step 4
Insert the other end of the WLAN signa cab e into the connector
abe ed JWLAN1 on the upper board. Be sure to have the meta
contacts facing down before inserting.
The WLAN kit shou d inc ude the WLAN modu e, two screws, one
board-to-board cab e, one mini coaxia cab e, one washer, one nut,
and one externa antenna.
2 Insta ing the B uetooth
Insta ing the B uetooth Insta ing the B uetooth
Insta ing the B uetooth
modu e
modu emodu e
modu e
The B uetooth kit shou d inc ude the B uetooth modu e, one screw,
and one board-to-board cab e.
The optiona B uetooth modu e inc udes a printed antenna and
uses the QCM-QBT400UB B uetooth contro er. The B uetooth
modu e is c assified as a C ass 2 device with an effective range of 10
meters. It supports mu ti-point operation and a fu 7-s ave piconet.
Step 3
Step 3Step 3
Step 3
Insert one end of the B uetooth signa cab e into the connector on
the B uetooth modu e. Be sure to have the meta contacts facing
down before inserting.
Step 2
Step 2Step 2
Step 2
A ign the mounting ho es and secure the B uetooth modu e to the
EMIO-3450.
Step 1
Step 1Step 1
Step 1
Locate the mounting ho e for the B uetooth modu e. The
mounting ho e ( abe ed U31) is ocated next to the edge of the
upper board near the audio jacks.
Step 4
Step 4Step 4
Step 4
Insert the other end of the B uetooth signa cab e into the
connector abe ed JBT1 on the upper board. Be sure to have the
meta contacts facing down before inserting.
Step 5
Step 5Step 5
Step 5
Secure the WLAN antenna jack to the chassis with the toothed
washer and nut, then attach the antenna Connect the WLAN
antenna cab e to the micro RF connector abe ed MAIN on the
WLAN modu e.

Step 4
Step 4Step 4
Step 4
A ign the two mounting ho es on the GPS modu e with the
mounting ho es on the standoffs. Then secure the GPS modu e
with two screws.
VIA Technologies, Inc.
1F, 531, Zhong-Zheng Road,
Xindian Dist., Taipei New City
231, Taiwan
Tel: [phone]
Fax: [phone]
Web: www.via.com.tw
Copyright © 2011 VIA Technologies, Inc. All rights reserved.
For more information on this and
other VIA products, please visit
www.viaembedded.com.
For further support and service,
please visit www.via.com/tw/en/
products/mainboards/contact.jsp
Layout
LayoutLayout
Layout Pinouts
PinoutsPinouts
Pinouts
Pin
PinPin
Pin
Signa
SignaSigna
Signa
Pin
PinPin
Pin
Signa
SignaSigna
Signa
1 LINE_OUT_R 2 LINE_OUT_L
3 LINE_IN_R 4 LINE_IN_L
5 MIC_R_R 6 MIC_R_L
7 KEY 8 NC
9 AGND 10 AGND
JAUDIO1
JAUDIO1JAUDIO1
JAUDIO1
Pin
PinPin
Pin
Signa
SignaSigna
Signa
1 W_LESS_LED
2 GND
JWLESS
JWLESSJWLESS
JWLESS-
--
-LED1
LED1LED1
LED1
4 Insta ing the Mobi e
Insta ing the Mobi eInsta ing the Mobi e
Insta ing the Mobi e
Broadband modu e
Broadband modu eBroadband modu e
Broadband modu e
The Mobi e Broadband kit shou d inc ude the broadband modu e,
one screw, one mini coaxia cab e, one washer, one nut, and one
externa antenna. The broadband modu e options of EMIO-1534
(Ericsson Mobi e Broadband Modu e F3307) or EMIO-1538
(Motoro a Mobi e Broadband Modu e HTM1000).
Pin
PinPin
Pin
Signa
SignaSigna
Signa
1 BT_LED
2 GND
JBT
JBTJBT
JBT-
--
-LED1
LED1LED1
LED1
Step 3
Step 3Step 3
Step 3
Once the modu e has been fu y inserted, secure the modu e with
two screws to the standoffs.
3 Insta ing the GPS
Insta ing the GPS Insta ing the GPS
Insta ing the GPS
modu e
modu emodu e
modu e
The GPS kit shou d inc ude the GPS modu e, two screws, one
board-to-board cab e, one mini coaxia cab e, one washer, one nut,
and one externa antenna.
The optiona GPS modu e inc udes a Leadtek LR9102 20-channe
GPS receiver.
Step 1
Step 1Step 1
Step 1
Insert one end of the GPS signa cab e into the connector on the
GPS modu e. Be sure to have the meta contacts facing down
before inserting.
Step 2
Step 2Step 2
Step 2
Insert the other end of the GPS signa cab e into the connector
abe ed JGPS1 on the upper board. Be sure to have the meta
contacts facing down before inserting.
Step 3
Step 3Step 3
Step 3
Locate the mounting ho es for the GPS modu e. The mounting
ho es have two standoffs pre-mounted on the upper board next to
the mounting ocation of the WLAN modu e.
Step 5
Step 5Step 5
Step 5
Insert the antenna cab e (provided with the GPS kit) into the GPS
antenna ho e. Secure the GPS antenna jack to the chassis with the
toothed washer and nut. Then attach the antenna provide with
Step 6
Step 6Step 6
Step 6
Connect the other end of the GPS antenna cab e to the micro-RF
connector on the GPS modu e.
Step 1
Step 1Step 1
Step 1
Locate the Mini-PCIe s ot (MINIPCIE2) near the center of the upper
board.
Step 4
Step 4Step 4
Step 4
Insert the antenna cab e into the Mobi e broadband antenna ho e
from the inside. Secure the Mobi e Broadband antenna jack to the
chassis with the toothed washer and nut.
Step 5
Step 5Step 5
Step 5
Attach the antenna provide with the Mobi e Broadband kit to the
Mobi e Broadband antenna jack.
(Top view)
(Top view)(Top view)
(Top view)
(Bottom View)
(Bottom View)(Bottom View)
(Bottom View)
JWXAN
JWXANJWXAN
JWXAN-
--
-LED1
LED1 LED1
LED1 (for MINIPCIE1 s ot)
(for MINIPCIE1 s ot)(for MINIPCIE1 s ot)
(for MINIPCIE1 s ot)
JWXAN
JWXANJWXAN
JWXAN-
--
-LED2
LED2 LED2
LED2 (for MINIPCIE2 s ot)
(for MINIPCIE2 s ot)(for MINIPCIE2 s ot)
(for MINIPCIE2 s ot)
Pin
PinPin
Pin
Signa
SignaSigna
Signa
Pin
PinPin
Pin
Signa
SignaSigna
Signa
1 VUSB4 2 VUSB4
3 USBD_T3- 4 USBD_T4-
5 USBD_T3+ 6 USBD_T4+
7 GND 8 GND
9 Key 10 GND
JUSB_1/2
JUSB_1/2JUSB_1/2
JUSB_1/2
Pin
PinPin
Pin
Signa
SignaSigna
Signa
Pin
PinPin
Pin
Signa
SignaSigna
Signa
1 -DCD_2 2 SIO_RXD2-UR
3 SIO_TXD2-UR 4 -DTR_2
5 GND 6 -DSR_2
7 -RTS_2 8 -CTS_2
9 -RI_2 10 key
JUR1
JUR1JUR1
JUR1
Pin
PinPin
Pin
Signa
SignaSigna
Signa
1 SIO_TXD2-UR
2 TXD_2
3 SIO_TXD2-PMM
J8
J8J8
J8
J9
J9J9
J9
Pin
PinPin
Pin
Signa
SignaSigna
Signa
Pin
PinPin
Pin
Signa
SignaSigna
Signa
1 WWAN_LED+ 2 WWAN_LED-
3 WLAN_LED+ 4 WLAN_LED-
5 WPAN_LED+ 6 WPAN_LED-
Pin
PinPin
Pin
Signa
SignaSigna
Signa
Pin
PinPin
Pin
Signa
SignaSigna
Signa
1 WWAN_LED+ 2 WWAN_LED-
3 WLAN_LED+ 4 WLAN_LED-
5 WPAN_LED+ 6 WPAN_LED-
Pin
PinPin
Pin
Signa
SignaSigna
Signa
1 SIO_RXD2-UR
2 RXD_2
3 SIO_RXD2-PMM
Note:
Note:Note:
Note:
WWAN — Wire ess Wide Area Network
WLAN — Wire ess Loca Area Network
WPAN—Wire ess Persona Area Network
Step 2
Step 2Step 2
Step 2
A ign the notch on the Mobi e Broadband modu e with the notch
on the Mini-PCIe s ot (MINIPCIE2) then insert the modu e
horizonta y.