VIA Technologies EMIO-3430 User manual

EMIO
EMIOEMIO
EMIO-
--
-3430
34303430
3430
Quick
QuickQuick
Quick Guide
Guide Guide
Guide
Specifications:
Specifications:Specifications:
Specifications:
• I/O Controllers:
I/O Controllers:I/O Controllers:
I/O Controllers:
V 1211 LPC UAR controller
V 6212L PCI USB 2.0 controller
• Bridge:
Bridge: Bridge:
Bridge:
undra si382 PCIe-to-PCI Bridge
• PC Card Interface:
PC Card Interface: PC Card Interface:
PC Card Interface:
• Rich R5C803 PC card controller
• Supports One PC card slot
• Supports CardBus (32-bit)
• Supports PCMCIA 2.1 / JEIDA 4.2 (16-bit)
• Supports +5V, +3.3V, and +12V @ 120 mA
• Audio:
Audio:Audio:
Audio:
• I PA1517 6W stereo audio power
amplifier
• 3 x 3.5mm RS jacks: Line-in, Speak-out,
Mic-in
• Dimensions:
Dimensions:Dimensions:
Dimensions: 170 mm (W) x 120 mm (L)
• Operating emperature:
Operating emperature:Operating emperature:
Operating emperature: 0°C ~ 60°C
• Humidity:
Humidity:Humidity:
Humidity:
0% ~ 90% relative humidity, non-condensing
Key Features:
Key Features:Key Features:
Key Features:
• Supports PCMCIA and Card-
Bus expansion cards
• Integrated 6W stereo audio
power amplifier
• Compatible with EI X-3000
• Optional support for WiFi,
GPS, and Bluetooth
he EMIO-3430 Em-IO card supports one PC card slot and three optional
wireless modules. he PC card slot supports PCMCIA or CardBus expan-
sion cards. he three optional wireless modules provide support for
802.11b/g Wireless LAN, GPS, and Bluetooth.
In addition, the EMIO-3430 offers HD Audio quality via a built-in 6W ste-
reo audio power amplifier. he EMIO-3430 is an ideal solution for traffic,
delivery and fleet management, as well as KIOSK and wireless POI applica-
tions.
Packing List:
Packing List:Packing List:
Packing List:
EMIO
EMIOEMIO
EMIO-
--
-3430
34303430
3430-
--
-00A1
00A100A1
00A1
• 1 x EMIO-3430 Em-IO card
• 1 x board-to-board audio cable (P/N: 99G33-190546)
• 1 x hex spacer kit (P/N: 99G44-020192)
— 6 x M3*5.5*19mm
• 1 x quick guide (P/N: 99G51-012974-10)
EMIO
EMIOEMIO
EMIO-
--
-3430
34303430
3430-
--
-01A1
01A101A1
01A1
All of the above plus:
• 1 x EMIO-1531 Bluetooth module kit
• 1 x EMIO-1532 GPS module kit
• 1 x EMIO-1530 WLAN module kit (US version)
• 1 x Software driver and utility CD (P/N: 99G64-021261-100)
EMIO
EMIOEMIO
EMIO-
--
-3430
34303430
3430-
--
-02A1
02A102A1
02A1
Same as above except the WLAN module kit is the EU version.
Note:
Note:Note:
Note:
Please ensure that all items in the packing list are present
before using this product. If any of the items are missing or
damaged, contact your distributor or sales representative
immediately.
Step 1
Step 1Step 1
Step 1
Remove the six screws from the EI X-3000 as indicated in the picture.
1
11
1
Step 2
Step 2Step 2
Step 2
Replace the screws with the six hex spacers.
P/N: 99G51-012974-10
Installing the
EMIO-3430
2
22
2
Installing the
GPS module
Step 3
Step 3Step 3
Step 3
Align the Em-IO connector on the bottom side of the EMIO-3430 with
the Em-IO connector on the EI X-3000.
Step 4
Step 4Step 4
Step 4
Connect the module to the board and make sure that nothing
obstructs the mounting holes on the top side of the hex spacers.
Step 5
Step 5Step 5
Step 5
Secure the module with the six screws from the EI X-3000.
he GPS kit should include the GPS module, two screws, one board-to-
board cable, one mini coaxial cable, one washer, one nut, and one
external antenna.
he optional GPS module includes a Leadtek LR9102 20-channel GPS
receiver.
Step 1
Step 1Step 1
Step 1
Align the mounting holes and secure the GPS module to the EMIO-
3430.
Step 2
Step 2Step 2
Step 2
hen insert the board-to-board cable with the contacts facing down,
as shown in the picture.

VIA echnologies, Inc.
VIA echnologies, Inc.VIA echnologies, Inc.
VIA echnologies, Inc.
1F, 531, Zhong-Zheng Road,
Xindian, aipei 23148
aiwan
el: 886-2-2218-5452
Fax: [phone]
Web: www.via.com.tw
Copyright © 2009 VIA echnologies, Inc. All rights reserved.
For more information on this and
other VIA products, please visit
www.viaembedded.com.
For further support and service,
please visit www.via.com/tw/en/
products/mainboards/contact.jsp
he WiFi kit should include the WiFi module, two screws, one board-
to-board cable, one mini coaxial cable, one washer, one nut, and one
external antenna.
he optional WLAN module includes a V 6656 WLAN controller and
provides support for 802.11 b/g standards.
Layout
LayoutLayout
Layout
he Bluetooth kit should include the Bluetooth module, one screw, and
one board-to-board cable.
he optional Bluetooth module includes a printed antenna and uses
the Qcom QB 400UB 01P Bluetooth controller. he Bluetooth module
is classified as a Class 2 device with an effective range of 10 meters. It
supports multi-point operation and a full 7-slave piconet.
Dimensions
DimensionsDimensions
Dimensions
Pinouts
PinoutsPinouts
Pinouts
Pin
PinPin
Pin Signal
SignalSignal
Signal Pin
PinPin
Pin Signal
SignalSignal
Signal
1 LINE_OU _R 2 LINE_OU _L
3 LINE_IN_R 4 LINE_IN_L
5 MIC_R_R 6 MIC_R_L
7 KEY 8 NC
9 AGND 10 AGND
JAUDIO1
Pin
PinPi n
Pin
Signal
SignalSignal
Signal
1 W_LESS_LED
2 GND
JWLESS-LED1
3
33
3
Installing the
WiFi module
4
44
4
Installing the
Bluetooth module
Step 4
Step 4Step 4
Step 4
Insert the large end of the mini coaxial cable into the front face plate.
Secure it in place by inserting the washer and then locking the washer
in place with the nut.
Step 5
Step 5Step 5
Step 5
he external antenna can be attached to the antenna connector on the
faceplate.
Step 1
Step 1Step 1
Step 1
Align the mounting holes and secure the module to the EMIO-3430.
Step 2
Step 2Step 2
Step 2
hen insert the board-to-board cable with the contacts facing down
into the connectors as shown in the picture.
Step 3
Step 3Step 3
Step 3
Connect the mini coaxial cable to the mini RF connector.
Step 1
Step 1Step 1
Step 1
Connect the board-to-board cable from the module to the EMIO-3430.
Ensure that the contacts on the cable are facing down before inserting.
Step 2
Step 2Step 2
Step 2
Align the mounting holes and secure the Bluetooth module to the
EMIO-3430.
Pin
PinPin
Pin Signal
SignalSignal
Signal
1 B _LED
2 GND
JB -LED1
Step 4
Step 4Step 4
Step 4
he external antenna can be attached to the antenna connector on the
faceplate.
Step 3
Step 3Step 3
Step 3
Attach the small end of the mini coaxial cable to the mini RF connector
on the GPS module.