ViaSat VS-R11 User manual

1
USER MANUAL
VS-R11 GPS Watch

2
Contents
Introduction ..................................................................................................................................................3
Appearance and interface.............................................................................................................................4
Appearance...............................................................................................................................................4
Interface.................................................................................................................................................... 5
How to use the watch...................................................................................................................................5
Install the APP and register user account.................................................................................................5
Watch set-up............................................................................................................................................. 6
Using the APP................................................................................................................................................7
Locating the watch....................................................................................................................................7
Historical location playback ......................................................................................................................8
Calling the watch....................................................................................................................................... 9
Voice monitoring....................................................................................................................................... 9
Setting watch user profile......................................................................................................................... 9
Message center....................................................................................................................................... 10
Fence list .................................................................................................................................................11
Family list ................................................................................................................................................12
Watch settings ........................................................................................................................................13

3
Introduction
GPS Phone Watch R11 is designed for people protection. It comes in color black but it can be customized
on request for specific order quantities.
It is water resistant and used for real-time tracking, emergency alarm (SOS button), safe zone alarm, voice
message, and two way voice communication. All features are available through a mobile APP available in
iOS and Android environments.
Fig 1. VSR11
The use of the watch is simple and can be summarized in following steps:
1. Order from a GSM operator a micro SIM card that must have following services active: internet
(GPRS), SMS and Voice Service. Works with prepaid also.
2. Insert the micro SIM card into a phone and disable the pin-code. Restart the phone to be sure
that the PIN is off.
3. Insert the micro SIM card in the watch holder as described in this document
4. Install the mobile APP on the smartphone or tablet (http://www.viasatsystems.ro/viawatch-
aplicatii/) with iOS or Android operating systems
5. Configure the watch in the mobile APP as described below
6. Explain to the child in simple words how to use and handle the watch
7. Start using it…

4
Appearance and interface
Appearance
Fig 3. Appearance
ON/SOS key –multiple functions:
▪Power on the watch, long press
▪If shortly pressed return to the previous interface or hang up the call (while in call)
▪Pressed for more than 3 seconds, it will trigger SOS alarm and call the emergency phone number
set from mobile APP
Function key:
▪While in call, shortly pressed answers the call
▪When not in call, check contact list and select phone number when shortly pressed
▪After selecting the phone number, press the key again for more than 3 seconds to call the selected
number

5
Interface
Fig 4. Interface
How to use the watch
Install the APP and register user account
Please access to www.viasatsystems.ro to download the APP on your mobile or look for MyRope in App
Store or Google Play. After the APP is installed on mobile phone, use your phone number or email address
to register as new user of the APP. Please use the correct number and email address since it will be used
for receiving the verification code and recover the password.

6
Fig 5. First screen Fig 6. Registration step 1
After registering the user account, it will auto-redirect the interface to watch
adding page. From this page please scan the QR code available on the back
of the watch or enter CID number (you can find the CID number by
continuously press “Function” key for 4 times while the SIM card is not
inserted in the watch), then fill the other information required.
Fig 7. Adding watch ID
Watch set-up
Charge the watch to have enough battery for setting up
Please make sure the SIM phone number used in the watch is correct, otherwise, the watch cannot be
located. The country code is not required when inserting the phone number in the APP.

7
Insert the SIM card in the slot with chipset upwards as shown in aside
figure, when the watch is powered off.
Fig 8. SIM card installation
Using the APP
If you want to add more watches to the APP, please click the icon located at the right side of top
banner, when you are in main page of the APP.
Locating the watch
After registering the watch, while powered on, take it in an open space that has direct sky visibility and
keep it for about 2 minutes, after this the APP will receive and report correct GPS location. In the main
screen of the app will appear the watch position:
Fig 9. Position balloon –main screen

8
The watch will continuously upload the GPS location every minute while moving, and switch to battery
saving mode when standing still.
If you want to know the most recent location and not wait for automatic position update, please click
“Loc” button available in the left side of the lower bar in APP main screen. The watch will report the
current position immediately.
If you are in a covered area with no GPS signal, the watch will switch to WIFI positioning (if there is any
WIFI network available - there is no need to register the watch to the WIFI) or LBS (Location Based Services
–from GSM cell) location mode. The source of a reported position is indicated in the left side of the watch
address balloon on the map.
Historical location playback
For checking the historical positions of the watch please click the “Track” button available in the lower bar
in APP main map screen, and select the date when in the indicated fields.
There are two options available for adjusting the historical reporting (Fig 10):
-To show a line that is connecting all positions reported (PathLine) –for an easier understanding
of the activity on map
-To show all positions available no matter of their source, checking the LB&WIFI option –not
checking this will show only GPS based positioning, so will not show activity in covered areas.
After pressing OK, the historical locations will be reported on map like in the fig 11 below.

9
Fig 10. Time period selection Fig 11. Tracking playback
Calling the watch
To call the watch, please click “Dial” button located in the lower bar of main screen (please note that only
the phone numbers from family list can make calls to the watch).
The user of watch can answer the call by pressing shortly the “Function” key on the side of the watch and
to reject it by shortly pressing “Power on” key.
Voice monitoring
By clicking the “Guard” button from the lower bar of main screen, your mobile will call the watch in “silent
mode” meaning the watch will not ring and will pick up the call automatically. When the connection is
made, you can listen the voice around the watch silently. Please note that only the administrator and
backup administrator can use this function.
Setting watch user profile

10
You can associate an image, phone number, and other detailed information of the watch user in the
section described below. Clicking the icon marked with red in fig 13 will open the data insertion section
Fig 13.
Fig 13 Watch settings area Fig 13 Watch user details
Message center
There are two types of notifications (messages):
1. Guard messages –it contains alerts like: Zone Exit, Zone Entering, Low battery and SOS activations
Fig 14 Guard messages