VibraLITE 8 User manual

Page 1
Vibra LITE®8
CONGRATULATIONS!
You have selected a quality timepiece
that will assist you in remembering tasks,
managing your time and keeping
focused. Perfect for reminders for
medication and medical conditions,
timing presentations or procedures, for
cooking, parking meters and for keeping
on schedule. The uses are endless. Set
the “vibration” feature for alarm settings
and countdown timer when you do not
want to alert or disturb others or when
you cannot hear an audible alarm. This
unique watch has been carefully
designed to give user satisfaction and to
be user friendly. The large display is
easy to read. Prompts are displayed to
assist in easy setting. User options are
easily set. Enjoy the many benefits of
this wonderful watch.
OPERATING MODES:
CALENDAR ALARM CHRONO
CLOCK (STOPWATCH)
TIMER OPTION
NOTE: To set any watch time, calendar
& timer, the digit(s) that you want to set
MUST BE FLASHING.
When setting Calendar/Clocks, Alarms
or Timer: if a delay of approx. 3 minutes
occurs without buttons being pushed,
digits will stop flashing and watch will
return to Calendar/Clock Mode.
Watch display will automatically return
to Calendar/Clock Mode from Option
Mode when no buttons are pushed in
approx. 3 minutes.
SETTING TIME OF DAY AND
CALENDAR
NOTE: THIS IS TIME ZONE 1 &
MUST BE SET CORRECTLY FOR
THE TIME OF DAY AS THE
ALARMS WILL WORK BASED ON
THIS TIME.
Three Time Zones are available.
Set Time Zone 1 for time of day of your
home location. This is the default Time
and will show on the watch at all times
when it is in the Calendar/Clock mode.
You have the option of setting Time
Zones 2 and 3. Examples: Time Zone 2
could be set for the location traveling to
or at. Time Zone 3 could be set for Zulu
Time (Greenwich Mean Time)
SET HOUR, MINUTE, SECONDS, DAY
OF WEEK, MONTH, DAY OF MONTH,
CHOOSE 12 HOUR (AM/PM Time ) or
24 HOUR TIME (Military Time)
CHOOSE ORDER TO VIEW DATE:
MONTH/DAY OR DAY/MONTH.
* Push MODE button to
rotate to
CALENDAR/CLOCK
MODE
* Push and Hold
SET/RESET Button.
* HOLD TO SET will
show on display.
Hold for 3 seconds
T-ZONE 1 will show
and 1 will be flashing on
the T-ZONE 1 screen.
* Push MODE Button.
Hour digit will flash.
* Push START/STOP Button to rotate
hour to correct hour for Time 1
setting.
NOTE: IF USING A 12 HR CLOCK
USE A.M OR P.M. (AM and PM
icons are located under the seconds
digits on the display.)
* Push MODE Button again,
Minute digits will flash.
* Push START/STOP Button to rotate
minutes to the correct time.
* Push MODE Button again.
Second digits will flash.
* Push START/STOP Button to rotate
the seconds to the correct time.
* Push MODE Button again
Day of Week digits will flash.
* Push START/STOP Button to rotate
to correct day of the week. (Example:
MO for Monday, TU for Tuesday,
WE for Wednesday, TH for Thursday,
FR for Friday, SA for Saturday, SU
for Sunday)
* Push MODE Button again.
Month digit(s) will flash.
* Push START/STOP Button to rotate
to the correct number of the month.
(Example: 1 for January, 6 for June,
12 for December etc.)
* Push MODE Button again.
Day of the Month digits will flash.
* Push START/STOP Button to rotate
to correct day of the month. (01-31)
* Push MODE Button again.
TIME 12 HR will show
on display with 12
flashing.
* Push START/STOP
Button to change to 24 Hour if 24
hour clock is desired.
* Push MODE Button again.
DATE MM-DD will show on display.
This selection will show the calendar
to read Month and then the Day of the
Month.
* Push START/STOP button to change
to DD-MM if you wish calendar to
read Day of Month and then Month.
* Push MODE Button again. T-ZONE 1
will show in display with 1 flashing.
While 1 is flashing you can continue
to set T-ZONE 2 or T-ZONE 3 if
desired by pushing START/STOP
Button to enter T-ZONE 2 or 3 and
continue to set the time as instructed
for Zone 1. (Using MODE Button to
change to hours, minutes, seconds
and date and using START/STOP
Button to rotate to the desired digit.)
or Push SET/RESET Button to
complete setting of ZONE 1.
TO SET T-ZONE 2 (OR T-ZONE 3)
AFTER ZONE 1 HAS BEEN SET
AND DIGITS ARE NOT FLASHING
Rotate to the CALENDAR/CLOCK
MODE by pushing the MODE Button.
* Push and Hold SET/RESET Button.
HOLD TO SET will show on display.
Hold for 3 seconds.
T-ZONE 1 will show on display and
the 1 will be flashing.
* Push START/STOP Button to rotate
to T-ZONE 2 (or T-ZONE 3).
* Push MODE button.
Hour digit will be flashing. Continue
to set hours, minutes, seconds and
date as you did in Time Zone 1.
Note: If T-Zone 1 is set for a 12-hour
clock, Zone 2 & 3 must also be in 12-
hour clock.
If T-Zone 1 is set for 24-hour clock,
Zone 2 & 3 must also be in 24-hour
clock.
TO VIEW THE TIME YOU HAVE
SET IN TIME ZONE 2 OR 3
While in Calendar/Clock Mode (Time
Zone 1)
* Push START/STOP Button. Time Set
will show for 3 seconds with T2 in
upper left corner of display.
* Push START/STOP Button again
within 3 seconds to view T3.
Display will automatically return to
Time set in Calendar/Clock (Zone1).
SETTING ALARM(S)
Up to 8 Alarms can be preset for daily
repetition. Alarms will activate based on
Time-Zone 1 settings. Alarm activation
is for approx. 20 seconds with automatic
shut off. Alarm may be stopped
manually during the 20 seconds by
pushing any button.
Note: Alarm options (Vibration, Sound
or both) are set in OPTION MODE.
HOURLY ALERT (a reminder every
hour on the hour) is also set in OPTION
MODE. See below for instructions.
SET HOUR & MINUTE FOR EACH
ALARM YOU WANT TO USE.
(MODE and START/STOP Buttons are
used the same as when setting Time of
Day in Calendar/Clock Mode. Digit
must be flashing to change it.)
TO SET ALARM 1
* Push MODE Button. to rotate to
ALARM MODE.
ALARM 1 OFF will
show on display when
an alarm time has not been set or
when the alarm has been turned OFF.
* Push and Hold SET/RESET Button,
HOLD TO SET will show on display.
Hold 3 seconds until Hours flash.
* Push START/STOP Button to rotate
the hours to correct alarm time.
NOTE: IF USING A 12 HR CLOCK
SET FOR A.M OR P.M. AS
REQUIRED.
* Push MODE Button. Minutes will
flash.
* Push START/STOP Button to rotate
to the minutes to correct alarm time.
* Push SET/RESET Button when alarm
time is correct. Flashing will stop.
Numbered Alarm Icon (1) will
show at bottom of display
screen to show alarm is set.
TO SET ADDITIONAL ALARMS (2-8)
* While in ALARM
MODE, select the alarm
you wish to set by
pushing SET/RESET
Button to rotate to that Alarm number.
(Rotates 2-8).
* Push & Hold SET/RESET Button.
HOLD TO SET will show on the
display. Hold until hours flash.
Continue as above to set hours and
minutes by rotating numbers with the
START/STOP Button and changing
from Hours to Minutes with the
MODE Button.
* Push SET/RESET Button when
correct hour and minute for alarm has
been entered. Numbered Alarm Icon
at the bottom of the display will show
for Alarm Set.
TO CHECK ALARM SETTINGS
* Push MODE Button to rotate to
ALARM MODE. ALARM 1 will
show the alarm set time.
* Push SET/RESET Button to rotate
through Alarms. (1 thru 8)
TO CHANGE ALARM SETTINGS
* Push MODE Button to rotate to
ALARM MODE. ALARM 1 will
show the alarm set time.
* Push SET/RESET Button to rotate
through Alarms until you reach the
Alarm that you want to change.
* Push & Hold the SET/RESET Button.
HOLD TO SET will show on the
display. Hold until hours flash.
Continue as above to set hours and
minutes by rotating numbers with the
START/STOP Button and changing
from Hours to Minutes with the
MODE Button.
* Push SET/RESET Button when you
have entered the change.
TO TURN OFF/ON ALARM(S)
(Example: OFF for wake up calls on
weekends, days off)
* Push MODE Button to rotate to
ALARM MODE. ALARM 1 will
show the alarm set time.
* Push SET/RESET Button to rotate to
the number of the Alarm that you
want to turn off.
* Push START/STOP
Button. ALARM will
show OFF on display.
* To turn alarm on push START/STOP
Button again. Original alarm time
will show on display.
Note: When Alarm is ON,
Alarm time shows on display.
When Alarm is turned off,
OFF will show on display.
CHRONO/STOPWATCH
The stopwatch can count up to 23 hours,
59 minutes and 59.99 seconds.
* Push the MODE Button to
rotate to the CHRONO
MODE. Wait 3 seconds.

Page 2
CHRONO 00’00”00
will then show on the
display.
* Push the START/STOP Button to
start the counting up.
The Icon located at the top
left of the display under the
C will flash.
* To Stop the Counting, Press the
START/STOP Button.
* Pushing the START/STOP Button
again will start the stopwatch
counting from where it stopped.
* To reset the stopwatch to zero while
running, push the START/STOP
Button and then push the
SET/RESET Button. To reset to zero
when stopped, push the SET/RESET
Button.
Split timing on Stopwatch
* Start the Stopwatch by pushing the
START/STOP Button. The
stopwatch will start counting up.
* Push the SET/RESET Button. The
watch will continue counting even
though you do not see it on the
display. The Icon at the top of the
display will continue to flash to show
action and that counting continues.
* Push the SET/RESET Button again
and the display will change and show
the time that has accumulated in total.
* To reset the stopwatch to zero, push
the START/STOP Button and then
push the SET/RESET Button.
TIMER MODE can be set for
countdown in Hours, Minutes and
Seconds. Timer can be set for any
amount of time up to 23 Hours, 59
minutes and 59 seconds. Note: If hours
or minutes or seconds are not wanted on
countdown, leave at 0 during setting.
A 5 second alert will be activated when
countdown reaches zero. If the time set
is less than 30 seconds, the alert will be
only 1 second.
Having the Countdown Time
Continually Repeating automatically is
an option. .
Having a reminder before zero on the
countdown is an option that can also be
set. The reminder alert is one second.
SETTING TIMER FOR COUNTDOWN
* Push MODE Button to
rotate to TIMER MODE.
* Push and Hold SET/
RESET Button.
HOLD TO SET will be show on the
display. Hold for 3 seconds.
Hour digit will flash.
* Push START/STOP Button to rotate
to desired hours of time wanted.
* Push MODE Button. Minutes will
flash.
* Push START/STOP Button to rotate
to desired minutes of time wanted.
* Push MODE Button,
Seconds will flash.
* Push START/STOP Button to rotate
to desired seconds of time wanted.
* While Digits are still flashing,
Push MODE Button.
REPEAT will show on display.
* Push START/STOP Button to select
REPEAT ON or REPEAT OFF.
If you set Repeat ON, the countdown
timer will alert you each time it reaches
zero and automatically reset itself for
the time you originally entered. It will
also give you a count of how many times
it has repeated. (Up to 99 and rolling
over to 0). If you set Repeat OFF, the
timer will countdown to zero and alert
you but will not repeat automatically.
You can however manually reset to the
original time entered by pushing and
holding the SET/RESET Button.
* Push MODE Button. REMIND will
show on display.
* Push START/STOP Button to select
REMIND ON or REMIND OFF.
With REMIND ON, when the
Countdown is set for more than 5
minutes and less than ten minutes, a
reminder alert will be activated at 5
minutes before zero. When the
countdown is set for more than 10
minutes, a reminder alert will be
activated at 10 minutes and at 5
minutes before zero. Select REMIND
OFF if you do not want reminders
before zero.
* Push SET /RESET button when
settings are completed. Flashing will
stop.
STARTING/STOPPING
COUNTDOWN TIMER
* While in TIMER MODE
Push START/STOP
Button to start countdown.
Icon located above seconds
digits will flash indicating
countdown timer is
activated.
* Push START/STOP Button to stop
countdown while it is running or to
continue countdown when it is
stopped.
QUICK RESETTING of
COUNTDOWN TIME (WHILE
COUNTDOWN IS RUNNING OR
STOPPED DURING COUNTDOWN)
* While in TIMER MODE
Push and Hold SET/RESET Button
HOLD TO RST (Reset)
will show on display.
Hold for 3 seconds.
Original time set for
countdown will automatically reset.
OPTION MODE
Is used to select the alarm preference of
Vibration (VIBRA) Audible (SOUND) or
both.
SET VIBRA ON OR OFF, SOUND ON
OR OFF
SET HOURLY ON OR OFF to alert you
every hour on the hour. A one second
reminder alert (Vibration, Sound or
Both) will occur as set.
* Push the MODE Button
to rotate to the OPTION
MODE. Wait 3 seconds.
VIBRA OFF will then
show on the display.
* Push START/STOP Button to change
to VIBRA ON.
* Pushing START/STOP Button again
will change to VIBRA OFF.
* Push SET/RESET Button. SOUND OFF
will show on Display.
* Push START/STOP Button to change to
SOUND ON. Pushing START/STOP
Button again will change to SOUND
OFF.
* Push SET/RESET Button. HOURLY
OFF will show on Display.
* Push START/STOP Button to change to
HOURLY ON. Pushing START/STOP
Button again will change to HOURLY
OFF.
* Push MODE Button to return to
Calendar/Clock Mode.
Icons will show settings selected on
display under date.
VIBRA ICON:
SOUND:
HOURLY:
TO REVIEW OPTION SETTINGS
* Push MODE Button to rotate to
OPTION MODE.
* Push SET/RESET Button. VIBRA,
SOUND & HOURLY alert setting will
rotate & show what is currently set.
QUICK CHECK TO CONFIRM
OPTION SETTINGS
Each time the MODE Button is pressed the
Alarm Option that is set will occur.
Example: If VIBRA is set you will feel
the Vibrations with each press of the
MODE Button.
EL LIGHT (Display back light)
* Push the LIGHT Button to turn on the
backlight. Note: Light can be activated
in any Mode.
Light will stay on for 3 seconds and then
automatically turn off if another button is
not pushed.
For watch settings in the dark, Light will
continue to stay on while any other button
is pushed within 3 seconds.
Example: This allows you to set the
countdown timer by rotating through the
steps and having the light on during the
process.
DISCLAIMER
The manufacturer does not accept any
responsibility whatsoever for any
inconvenience or non-compliance for
medication or any other purpose the watch
may be used for.
IMPORTANT PRECAUTIONS
VibraLITE®watches are not intended to be
worn during swimming, diving or in the
shower.
Do not attempt to open the watch to
replace the battery yourself, or for any
reason, as this operation must be
performed by a qualified technician under
controlled conditions.
We recommend that you retain your
original sales slip as your proof of
purchase date.
BATTERY INFORMATION
Your watch uses a Standard 3 volt lithium
CR2032 or equivalent battery. Battery life
will vary due to how often the EL back
light and vibration function are used.
Batteries must be replaced by a qualified
person to maintain water resistance.
SERVICE
Qualified service personnel must service
this watch. Attempt to service the watch
by the user will void the warranty.
Before sending your watch for service,
have the battery checked and/or try
resetting by pushing the MODE,
START/STOP and SET/RESET buttons at
the same time and hold until the display
clears and then reset time etc.
ONE YEAR LIMITED WARRANTY
Your VibraLITE 8 is warranted to be free
from defects in material or workmanship
for One Year from the date of purchase.
This is a limited warranty and covers
watch functions only. This warranty does
not apply to the battery, band, case or
crystals since such items are subject to
wear and tear of daily use. The warranty
is void if the watch has been tampered
with, altered, abused, or subjected to
extreme conditions for which it was not
designed, or repaired other than by a
qualified service center. At its option, the
manufacturer may select to replace the unit,
rather than repair it. During the warranty
period, return the watch, with dated proof
of purchase, in a secure package, insured
and with shipping charges prepaid. No
C.O.D. packages will be accepted. Please
include a note describing the service
required, your return address and include
$10.00 (check, money order, Visa,
MasterCard, American Express, or
Discover) for shipping and handling in the
USA. Other Countries please contact us
for pricing.
OUT OF WARRANTY SERVICE
Follow the same procedure for shipping to
us as you would for warranty service. Be
sure to include a description of the
problem. An estimate will be submitted
for your approval for any labor or parts not
covered by the warranty before any work
is performed.
www.VibraLITE.com