Vicko USSF-711 User manual

INSTRUCTIONS MANUAL
Model No: USSF-711
Ref. No: 862-8135
STAND FAN

2
ATTENTION! - IMPORTANT SAFEGUARDS
1. This appliance is designed for domestic use only. No responsibility is
accepted for damage resulting from use non-compatible with the instructions.
2. The appliance is only intended to be used indoors and not outdoors.
3. Do not operate the appliance if the power cord shows any signs of damage.
If the supply cord is damaged, it must be repaired by a qualified person in
order to avoid a hazard. Improper repairs may place the user at serious risk.
4. Always handle the power cord with care. Do not pull or strain the power cord.
The power cord may never be folded or pinched. Always pull the plug to
disconnect the power cord, never pull on the cord to disconnect it.
5. Do not use the cord as a handle.
6. Do not let the cord wedged between a closed door.
7. Do not pull the cord near sharp corners.
8. Do not let the cable resting on a hot surface.
9. Do not use any accessories not recommended by the manufacturer. It may
cause injury and device destruction.
10. Do not use with a voltage converter.
11. Do not place the appliance near a microwave oven, electric oven, gas oven
or washing machine. Keep the appliance away from flammable objects or
other heat source.
12. Do not use outdoors or where aerosol spray products are being used or
where oxygen is being administrated.
13. The socket must be easily accessible at any time to ensure that the unit can
be disconnected quickly from the electricity supply.
14. Never use the appliance in the bathroom near a swimming pool, or any other
place with humidity and high temperature.
15. The appliance should not be exposed to extreme weather conditions (rain,
etc.) or any wet conditions.
16. Do not place or store the appliance where it can fall or be pulled into a tub of
sink.
17. Always leave enough space around the device when it is in use, among
other items. Do not place the device near flammable materials such as
furniture, pillows, fabrics, curtains, etc.
18. Always use the device in an upright position.
19. Do not operate the appliance with wet hands.
20. Do not use while you are in contact with water.
21. Do not immerse the appliance in water or any other liquids.
22. Do not reach for an appliance that has fallen into water. Just pull the plug off.
23. Do not drop or insert any objects into any opening.
24. Never insert your fingers or any other objects (hair, clothes, utensils, knives,
screw drivers etc.) into the openings of the Guard or close to the blade when
the appliance is connected to the power supply.
25. Do not use the device if the blade is broken or damaged.

3
26. The device should always be disconnected from the mains when not in use.
Always switch OFF and unplug the appliance if it is not in use before moving,
cleaning, assembling or disassembling and storing it.
27. Before disconnecting the appliance from the socket, always press the switch-
off button “0” to turn the operation OFF.
28. Please note that the device is powered up when connected to the power
supply, even when the appliance is not in operation.
29. The device should be used only by adults.
30. Keep the appliance away from children. Children must be under supervision
when they are near the device.
31. The device is not a toy. Children should be supervised to ensure that they do
not play with the appliance.
32. Always supervise the device when it is in use.
33. The appliance should only be stored indoors in a dry place away from
moisture and high or very low temperature and avoid direct exposure under
ultraviolet.
34. Read all the instructions carefully before you use the appliance and keep
them for future use.
CAUTION!
Never insert your fingers or any other objects (hair, clothes,
utensils, knives, screw drivers etc.) into the openings of the
guard or close to the blade when the appliance is connected
to the power supply.
CAUTION!
DO NOT COVER the appliance in any way in order to avoid
overheating and fire.
CAUTION - RISK OF ELECTRIC SHOCK!
To reduce the risk of electric shock do not open this device,
there are not serviceable parts for customers. Please refer
any maintenance or repair to qualified personnel.

4
BEFORE USE
1. Ensure the packaging of this appliance is disposed of properly as all materials
are recyclable.
2. Keep plastic bags away from babies and children.
3. After you remove the device from its packing, clean it with a damp cloth.
4. Never put the appliance under running water, in order to clean it.
5. Place the device on a flat and dry surface.
6. Before using the device, please unfold the cord completely and make sure
that it does not show any sign of damage.
7. Ensure that the main voltage rating of your power supply corresponds to the
voltage requirements of the appliance
8. Make sure that all parts of the device are properly mounted before using the
appliance.
9. If you notice that there is a little smell or smoke going out of the appliance
during the first use, do not worry, it is normal.

5
APPLIANCE DETAILS
1A Guard (back)
1B Guard (front)
2. Motor
3. Fastener
4. Blade
5. Output shaft
6. Fastener
7. Lock clips
8. Base
9. Support tube
10. Panel
11. Height regulator
12. Rotating function switch

6
ASSEMBLY
Please follow the below instructions in order to assembly the appliance.
ATTENTION: Always make sure the appliance is unplugged from the
power supply before starting to assemble it.
1. Place the back part of the guard (1A) on the motor (2) and secure with
fastener (3).
2. Put the blade (4) on the motor output shaft (5) and tighten with the fastener
(6).
3. To connect the two parts of guard together (1A and 1B) connect them in a
way so that the logo is in a horizontal position and tighten using the
lock clips (7).
4. After screwing the base (8) onto the support tube (9), you can insert and
fasten the panel (10) onto the support tube (9).
5. The height regulator (11) is used in order to specify the height of the fan to
the desired level.

7
INSTRUCTIONS
Please follow the below instructions in order to use the appliance.
TURN ON / OFF AND SETTING THE WIND SPEED
To turn on the fan, press the desired button (1, 2 or 3) for speed on the panel.
By pressing the corresponding button you can adjust the wind speed of the fan to
the desired level.
To turn off the fan, just press the button with “0” indication.
Button “3” ► High speed
Button “2” ► Medium speed
Button “1” ► Low speed
Button “0” ► Turn OFF

8
SETTING THE WIND DIRECTION
This fan can swing in UP and DOWN direction. The
angle of facing upwards and downwards can be
adjusted by slightly lift or press the cover.
1. Turn the clamp counterclockwise to loosen the
joint.
2. Turn the cover of the fan to the desired angle.
3. Turn and tighten the clamp clockwise in order to
stabilize the cover of the fan in this position.
SETTING THE OSCILLATION
Use the oscillation function switch (12) in
order to enable or disable the oscillation
of the fan. By pressing the switch you
enable the oscillation and by pulling it out
you disable the oscillation.
CLEANING
•Unplug the appliance and let it cool down before you clean it.
•Clean the external surface of the appliance with a damp cloth.
•Do not put the appliance in water, neither rinse it under tap water or any
other liquid.
•Do not use sharp objects, hard brushes or oven cleaners to clean the device.
CLAMP
OSCILLATION
SWITCH

9
Note:
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety. Children should be supervised to ensure that they do not play
with the appliance.
Note:
The appliances are not intended to be operated by means of an external timer or separate
remote-control system.
RECYCLING OF USED ELECTRICAL OR ELECTRONIC APPLIANCES
This marking indicates that this product should not be disposed with other
household wastes throughout EU. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources. To
return your used device, please use the return and collection systems or
contact the retailer where the product was purchased. They can take this
product for environmental safe recycling.
PROTECT THE ENVIRONMENT
The product COMPLIES with EU directives WEEE (about recycling) and ROHS
(Restriction of the use of Certain Hazardous Substance).
TECHNICAL SPECIFICATIONS
Model:
USSF-711
Ref. No:
862-8135
Power:
45W
Rating:
220-240V
Frequency:
50Hz
Features:
3 speeds.
With oscillation function.
Safety guard.
Now noise level.
ALL PRODUCTS ARE GUARANTEED FOR THEIR QUALITY