Viking E-1600A-MK-GNP User manual

PRODUCT MANUAL
Designed, Manufactured and Supported in the USA
COMMUNICATION & SECURITY SOLUTIONS
Gooseneck Pedestal Mounting Kit for the
E-1600A, E-1600-45A, E-1600-60A and E-1600-65A
Features
The model E-1600A-MK-GNP is a mounting kit
for attaching the E-1600A, E-1600-45A, E-
1600-60A or E-1600-65A Emergency Phone to
a Viking VE-GNP gooseneck pedestal.
The kit includes stainless steel mounting hard-
ware, two gaskets to seal the back of the Emer-
gency Phone and a durable powder coated 12
gauge steel mounting plate.
• E-1600A-MK-GNP allows the E-1600A,
E-1600-45A, E-1600-60A or E-1600-65A
Emergency Phone to be mounted directly
to a Viking VE-GNP gooseneck pedestal
• Durable 12 gauge steel mounting plate
• Plate is powder coat primed then top
coated with a UV stable black textured
powder coat
• Stainless steel mounting hardware is in-
cluded
• Two gaskets are included for sealing the
back of the Emergency Phone to the
gooseneck pedestal
• For mounting the following Viking Emer-
gency Phones to a Viking VE-GNP
gooseneck pedestal for emergency pool
phone applications etc.
- E-1600A Red Emergency Phone
- E-1600-45A Yellow Emergency Phone
- E-1600-60A “Police” Emergency Phone
- E-1600-65A Blue Emergency Phone
For more information on Viking Emer-
gency Phones, see DOD# 215
Dimensions: 136.4mm x 86.4mm x 2.67mm
(5.37” x 3.40” x 0.105”)
Shipping Weight: 0.544 kg (1.2 lbs)
Environmental: -40°C to 65°C (-40°F to 150°F)
with up to 100% humidity
Included Hardware: (4) #10-24 x 5/8 stainless
steel truss head screws, (4) 10-24 stainless steel
nylock nuts
E-1600A-MK-GNP
E-1600A Gooseneck
Pedestal Mounting Kit
May 22, 2013
Applications
Specifications
www.vikingelectronics.com
Information: [phone]
VIKING
E-1600A-MK-GNP Mounting Plate
Model E-1600A
Emergency Phone
shown with VE-GNP
Pedestal and
E-1600A-MK-GNP
Mounting Kit

Square Gasket
(included) Rectangle Gasket
(included)
E-1600A-MK-GNP
Mounting Plate
(included)
Installation
Step 1. Adhere the square gasket to the E-1600A-MK-GNP mounting plate. Make sure gasket is
centered and holes align. (Figure 1)
Step 2. Adhere the rectangular gasket to the other side of the E-1600A-MK-GNP mounting plate.
Make sure gasket is centered and holes and arrow symbol align. (Figure 1)
Step 3.
Place the E-1600A back plate on the rectangular gasket side of the E-1600A-MK-GNP
mounting plate. Pull the wires through the center hole on the plates. Make sure the arrow
symbol on the E-1600A-MK-GNP mounting plate is pointing UP then attach the
square gasket side of the plate to the VE-GNP pedestal mounting plate with the 4 truss
head screws and nylock nuts as shown. Do not tighten screws until all 4 screws are in-
serted and plate is aligned. (Figure 2)
Step 4. Attach the wires from the pedestal to the E-1600A with provided butt connectors then fas-
ten the E-1600A to mounting plate by tightening the set screw on the bottom of the unit.
Model E-1600A
(not included) see DOD# 215
(4) 10-24 Nylock nuts
included with mounting kit
E-1600A-MK-GNP Mounting Plate
with both gaskets adhered
(4) #10-24 x 5/8 Truss Head screws
included with mounting kit
VE-GNP
mounting plate
(not included)
see DOD# 424
E-1600A back plate,
included with model E-1600A
Figure 1
Figure 2
2

3
Compatible Viking Products
The 1600A Series ADA Compliant Emergency Phones are designed to provide quick and reliablehands-
free communication for any standard analog telephone line or analog phone system station port. All
1600A Series phones meet ADA requirements for elevator/emergency telephones, and can be pro-
grammed from any Touch Tone phone. The phones can dial up to 5 programmable emergency numbers,
as well as 2 central station numbers.
1600A Series Emergency Phones
E-1600-65A
Emergency Blue
E-1600-45A
Safety Yellow
E-1600-60A
Police Blue
E-1600A
Emergency Red
The 1600A Series phones can be programmed to auto-
matically deliver a digital announcement to identify the lo-
cation of the emergency call. Alternatively, a DTMF Touch
Tone code may also be delivered. A “Call Connected”
LED can be initiated manually or automatically. All pro-
gramming parameters, including phone numbers and lo-
cation numbers, are stored in non-volatile memory. All
units are phone line powered, requiring no batteries or
external power and are compatible with common Central
Station Monitoring equipment.
Gooseneck Pedestals
Viking’s gooseneck pedestals are designed to
be compatible with Viking products. Model
VE-GNP is a 42” tall, pad mount, black powder
paint gooseneck pedestal. Model VE-GNP-SS
is a 42” tall, pad mount, 304 brushed stainless
steel gooseneck pedestal. The VE-GNP-IG is
a 64” tall, in-ground mount, black powder paint
gooseneck pedestal. Model VE-GNP-2 is a
42”/72” dual height, pad mount, black powder
paint gooseneck pedestal.
For more information on Viking Gooseneck
Pedestals, see DOD# 424.
For outdoor installations where the unit
is exposed to precipitation or conden-
sation, select 1600A Series phones
are available with Enhanced Weather
Protection (EWP).
For more information on the Viking
1600A Series, see DOD# 215.
VE-GNP-2
VE-GNP-IG
VE-GNP-SS
VE-GNP

4
Printed in the U.S.A.
DOD# 227
ZF303410 Rev 3
Due to the dynamic nature of the product design, the information contained in this document is subject to change without notice. Viking Electronics, and its affiliates
and/or subsidiaries assume no responsibility for errors and omissions contained in this information. Revisions of this document or new editions of it may be issued
to incorporate such changes.
Product Support: [phone]
IF YOU HAVE A PROBLEM WITH A VIKING PRODUCT, CONTACT: VIKING TECHNICAL SUPPORT AT [phone]
Our Technical Support Department is available for assistance Monday 8am - 4pm and Tuesday through Friday 8am - 5pm central time. So that we can give you bet-
ter service, before you call please:
1. Know the model number, the serial number and what software version you have (see serial label).
2. Have your Technical Practice in front of you.
3. It is best if you are on site.
RETURNING PRODUCT FOR REPAIR
The following procedure is for equipment that needs repair:
1. Customer must contact Viking's Technical Support Department at 715-386-8666 to obtain a Return Authorization (RA) number. The customer MUST have a com-
plete description of the problem, with all pertinent information regarding the defect, such as options set, conditions, symptoms, methods to duplicate problem, fre-
quency of failure, etc.
2. Packing: Return equipment in original box or in proper packing so that damage will not occur while in transit. Static sensitive equipment such as a circuit board
should be in an anti-static bag, sandwiched between foam and individually boxed. All equipment should be wrapped to avoid packing material lodging in or sticking
to the equipment. Include ALL parts of the equipment. C.O.D. or freight collect shipments cannot be accepted. Ship cartons prepaid to: Viking Electronics, 1531
Industrial Street, Hudson, WI 54016
3. Return shipping address: Be sure to include your return shipping address inside the box. We cannot ship to a PO Box.
4. RA number on carton: In large printing, write the R.A. number on the outside of each carton being returned.
RETURNING PRODUCT FOR EXCHANGE
The following procedure is for equipment that has failed out-of-box (within 10 days of purchase):
1. Customer must contact Viking’s Technical Support at 715-386-8666 to determine possible causes for the problem. The customer MUST be able to step through
recommended tests for diagnosis.
2. If the Technical Support Product Specialist determines that the equipment is defective based on the customer's input and troubleshooting, a Return Authorization
(R.A.) number will be issued. This number is valid for fourteen (14) calendar days from the date of issue.
3. After obtaining the R.A. number, return the approved equipment to your distributor, referencing the R.A. number. Your distributor will then replace the product over
Viking using the same R.A. number.
4. The distributor will NOT exchange this product without first obtaining the R.A. number from you. If you haven't followed the steps listed in 1, 2 and 3,
be aware that you will have to pay a restocking charge.
LIMITED WARRANTY
Viking warrants its products to be free from defects in the workmanship or materials, under normal use and service, for a period of one year from the date of
purchase from any authorized Viking distributor or 18 months from the date manufactured, which ever is greater. If at any time during the warranty period, the
product is deemed defective or malfunctions, return the product to Viking Electronics, Inc., 1531 Industrial Street, Hudson, WI., 54016. Customer must contact
Viking's Technical Support Department at 715-386-8666 to obtain a Return Authorization (R.A.) number.
This warranty does not cover any damage to the product due to lightning, over voltage, under voltage, accident, misuse, abuse, negligence or any damage
caused by use of the product by the purchaser or others. This warranty does not cover non-EWP products that have been exposed to wet or corrosive environ-
ments.
NO OTHER WARRANTIES. VIKING MAKES NO WARRANTIES RELATING TO ITS PRODUCTS OTHER THAN AS DESCRIBED ABOVE AND DISCLAIMS
ANY EXPRESS OR IMPLIED WARRANTIES OR MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE.
EXCLUSION OF CONSEQUENTIAL DAMAGES. VIKING SHALL NOT, UNDER ANY CIRCUMSTANCES, BE LIABLE TO PURCHASER, OR ANY OTHER
PARTY, FOR CONSEQUENTIAL, INCIDENTAL, SPECIAL OR EXEMPLARY DAMAGES ARISING OUT OF OR RELATED TO THE SALE OR USE OF THE
PRODUCT SOLD HEREUNDER.
EXCLUSIVE REMEDY AND LIMITATION OF LIABILITY. WHETHER IN AN ACTION BASED ON CONTRACT, TORT (INCLUDING NEGLIGENCE OR STRICT
LIABILITY) OR ANY OTHER LEGAL THEORY, ANY LIABILITY OF VIKING SHALL BE LIMITED TO REPAIR OR REPLACEMENT OF THE PRODUCT, OR AT
VIKING'S OPTION, REFUND OF THE PURCHASE PRICE AS THE EXCLUSIVE REMEDY AND ANY LIABILITY OF VIKING SHALL BE SO LIMITED.
IT IS EXPRESSLY UNDERSTOOD AND AGREED THAT EACH AND EVERY PROVISION OF THIS AGREEMENT WHICH PROVIDES FOR DISCLAIMER
OF WARRANTIES, EXCLUSION OF CONSEQUENTIAL DAMAGES, AND EXCLUSIVE REMEDY AND LIMITATION OF LIABILITY, ARE SEVERABLE FROM
ANY OTHER PROVISION AND EACH PROVISION IS A SEPARABLE AND INDEPENDENT ELEMENT OF RISK ALLOCATION AND IS INTENDED TO BE EN-
FORCED AS SUCH.
Warranty