vipp VIPP714 User manual

VIPP714
Open-Air Coffee Table Ø60
VIPP.COM @VIPP
VIPP HEADQUARTERS
Snorresgade 22 | 2300 Copenhagen S | Denmark
[phone] | [e-mail]
VIPP STUDIO USA
[phone] | [email protected]
Whether we develop a bin, rethink
the modular kitchen, or create a furniture
line, we measure the quality of our products
on their ability to stand the test of time.
A recipe we have followed since 1939.
KASPER EGELUND, CEO AND 3RD GENERATION VIPP OWNER
CONGRATULATIONS ON YOUR NEW
VIPP OPENAIR COFFEE TABLE Ø60

WARRANTY
Vipp oers warranty on products according to national laws and regulations. The warranty does not cover defects or damage
caused directly or indirectly by misuse or poor maintenance, violence or manipulation. The warranty presupposes rightful use as
described in Vipp’s care instructions, which can be found in this folder or under the specifications of each product at vipp.com.
In case of a defective product, please contact your place of purchase.
ASSEMBLY GUIDE
The smallest of the two coee tables combines spindly legs with a solid ceramic top. Consisting
of a three-legged aluminum frame with a 12 mm ceramic tabletop in Ø60 cm, the coee table
oers a durable and monochrome look for the lounge area. It can be combined with the Vipp716
Ø90 coee table.
Materials
Powder-coated aluminum with outdoor coating, tabletop of ceramic.
We recommend caring for the tabletop to ensure its long-lasting appeal and appearance.
Ceramic tabletop
General care: Use a cloth, warm water, and a mild detergent. Use a slightly rougher sponge
for solid stains.
Limescale stains: Use a lint-free cloth and a mild detergent suitable for painted surfaces.
Rinse with water and wipe down the frame with a dry cloth.
Grease stains: Use alcohol or glass cleaner to remove grease stains.
NOTE
Due to the hardness of the ceramic surface, please use caution when placing delicate items
directly on the tabletop.
Powder-coated surfaces
Keep powder-coated surfaces clean and dry. Use a lint-free cleaning cloth or a so
brush with warm water and a mild detergent. Finish by wiping down the surface with
a dry cloth.
Read more about care instructions on vipp.com.
Please follow the assembly guide to ensure correct installation.
1. When assembling your table, place it upside down on the cardboard or another so underlay
to prevent scratches or marks, and to protect the floor. Do not place the table on its sides.
2. Mount each leg (1), and tighten the screws (2).
3. Place tabletop on the frame so it is aligned correctly with the outer edge.
If you experience problems, please do not hesitate to contact our Customer Service at [e-mail].
1
2
3
60 cm / 23.6 in
36 cm
14.2 in
PRODUCT DIMENSIONS
H. 36 cm / 14.2 in, Ø. 60 cm / 23.6 in.
PRODUCT DESCRIPTION CARE INSTRUCTIONS