Viss PL-1000 User manual

Owner’s Manual
Intense Pulsed Light (IPL)
Hair removal / Skin Rejuvenation / Acne treatment


Thank you for choosing VISS IPL! Please visit www.vissbeauty. com
and nd more information about Viss products.
VISS IPL technology was designed with safety in mind and gives
you simplicity, exibility and privacy with proven results.
This device has been designed for
Hair removal / Skin rejuvenation / Acne treatment
with replacing optional lamp cartridges.
For more information and updates, please refer to our Website.
www.vissbeauty.com

1.2 Benets
This device provides the following benets:
Benets depends on optional cartridge that you purchased.
1.1 What’s Included
Please check to make sure all listed components are
included and that they are not defective.
Main Device
Safety Glasses
Owner’s Manual
Lamp Cartridge
(Cartridges are optional.)
AC Power Cable Glasses Pouch

HAIR REMOVAL
VISS IPL with 640nm -900nm cartridge provides you hair reduction and
hair re-growth prevention. Optimal results were generally achieved
after four to ve treatments.A reduction in hair density is visible from
treatment to treatment. How fast the eect becomes visible and how
long the results last varies from person to person.
To treat all hairs successfully and prevent the hair root from
becoming active again, we advise you follow the provided treatment schedule.
SKIN REJUVENATION
Photorejuvenation with 550nm -900nm cartridge is eective against sun
damaged skin, age spots, rosacea , enlarged pores, acne, mild wrinkling
and ne lines. This process works by targeting damaged cells
and jumpstarting the body’s self-repairing mechanisms.
ACNE TREATMENT
Acne treatment with 400nm -700nm cartridge reduces the blood supply to the
sebaceous gland, which slows down production of the body oil sebum, and
destroys acne bacteria blocking the pores of the skin.

Below is a list naming the parts of your VISS IPL. The corresponding
numbers can be found in the diagrams on Pg. 5.
1. Applicator
2. Intensity level button
3. Control panel
4. Intensity level indicator
5. Power button
6. Power light
7. Error light
8. Cord wrap
9. AC Plug insert
10. Main Power Switch
11. Flash button
12. Ready to ash indicator light
13. Cartridge
14. Skin sensor
15. Lamp


Read this user manual in its entirety before you use this device and
save it for future reference.
3.1Danger
• Water and electricity are a dangerous combination. Do not use
this device in wet surroundings (e.g. near a bath, a shower or a
swimming pool).
• Keep this device and the adapter dry.
3.2Warning
• This device is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they have been given
supervision or instruction concerning use of this device by a
person responsible for their safety.
• Children should be supervised to ensure that they do not
play with this device.

• This device is not intended for children younger than 14 years.
• Teenagers aged between 15 and 18 years can use this device with
the consent and/or assistance of their parents or the persons who
have parental authority over them. Adults from 19 years and older
can use this device freely.
• Only use this device with the adapter supplied.
• Do not use this device or the adapter if it is damaged.
• Do not use this device if the lter glass is broken.
• If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualied persons in
order to avoid a hazard.
3.3 Preventing damage
• Never cover the ventilation slots during use.
• Make sure nothing can obstruct the air ow through
the ventilation slots.
• Never subject this device to heavy shocks and do not
shake or drop it.
• If you take this device from a very cold environment to a very warm
environment, wait approximately 3 hours before you use it.
• Never use or store this device in a dusty environment.
• Never leave this device unattended when it is switched on. Always
switch o this device after use.
• Do not expose this device to direct sunlight or UV light for long
periods of time.

• Do not ash against white, smooth or reective
surfaces like paper, mirrors, oors, walls etc. This can cause
severe damage to the removable window. Only ash when this
device is in contact with skin.
3.4Caution
• Please use this device only at intensity level suitable for your
skin type. Use at higher settings than those recommended can
increase the risk of skin reactions and side eects.
• Do not use on face
• Do not expose this device to temperatures lower than 15°C
or higher than 35°C during use.
• Never tamper or attempt to open device
• Never use this device in any of the cases mentioned
under ‘Contraindications’ (Ch. 3.6).
3.5 Who should not use VISS IPL?
VISS IPL is not designed for everyone. If any of the following is true
for you, then this device is not suitable for you to use.
• If your natural hair colour in the treatment areas is light blond,
white, grey or red.
• If you are of skin type VI (you rarely or never get sunburnt and you
tan very darkly). In this case you run a high risk of developing skin
reactions such as strong redness, burns or discolourations .

• There are medications and health conditions that may lead to
adverse reactions when you use VISS IPL. Please read section
‘Contraindications’ to determine whether any of these apply to you.
• All types of tanning can inuence the safety of the treatment.
This applies to exposure to natural sunlight as well as
articial tanning methods such as tanning lotions, tanning
devices etc. If you are tanned or are planning to tan, please
see ‘Tanning advice’ section (Ch. 5.2).
3.6 Contraindications
Your skin may become a little red and irritated after you have used
this device. This phenomenon is absolutely normal and quickly
disappears. If the irritation does not disappear within three days, we
advise you to consult a doctor.
NEVER USE THIS DEVICE :
• If you have an unsuitable skin and/or hair type
(consult the skin/hair colour table (Ch. 5.3) to determine
whether this device is suitable for you).
• If you have a skin disease such as active skin cancer, if
you have a history of skin cancer or any other localized
cancer in the areas to be treated.
• If you have pre-cancerous lesions or multiple atypical |
moles in the areas to be treated.
• If you have a history of collagen disorder, including a history of
keloid scar formation or a history of poor wound healing.
• If you have a history of vascular disorder, such as the presence of
varicose veins or vascular ectasia in the areas to be treated.

• If your skin is sensitive to light and easily develops a rash or an
allergic reaction.
• If you have infections, eczema, burns, inammation of hair
follicles, open lacerations, abrasions, herpes simplex, wounds or
lesions and haematomas in the areas to be treated.
• If you have had surgery in the areas to be treated.
• If you have epilepsy with ashlight sensitivity.
• If you have diabetes, lupus erythematodes, porphyria or congestive
heart disease.
• If you have any bleeding disorder.
• If you have a history of immunosuppressive disease (including HIV
infection or AIDS).
• On areas of your skin where you are currently being treated with
or have recently been treated with Alpha-Hydroxy Acids (AHAs),
Beta- Hydroxy Acids (BHAs), topical isotretinoin and azelaic acid.
• If you have taken oral isotretinoin Accutane® or Roaccutane®
in the last six months. This treatment can make skin more
susceptible to tears, wounds and irritations.
• When you are on painkillers, which reduce skin’s sensitivity to
heat. If you are taking photosensitising agents or medications,
check the package insert of your medicine and never use this
device if it is stated that it can cause photo-allergic reactions,
photo-toxic reactions or if you have to avoid sun when taking this
medicine.
• If you take anticoagulation medications, including heavy use of
aspirin, in a manner which does not allow for a minimum 1-week
washout period prior to each treatment.

• If you take immunosuppressive medications.
• Over or near anything articial like silicon implants, Implanon
contraceptive implants, pacemakers, subcutaneous injection ports
(insulin dispenser) or piercings.
• On moles, freckles, large veins, darker pigmented areas, scars,
skin anomalies without consulting your doctor. This can result in
a burn and change of colour, which makes it potentially harder to
identify skin related diseases (e.g. skin cancer).
• On nipples, areolas and mucous areas (inner vagina and anus).
• On warts, tattoos or permanent make-up. This can result in a burn
and change of colour.
• After intensive sunbathing and/or on sunburnt skin or
if you use suntan accelerators. See ‘Tanning advice’ (Ch. 5.2)
section for more information.
• If you use long-lasting deodorants.
• If you are pregnant

5.1Preparing treatment areas
For optimal results and highest ecacy, prepare the areas on which
you intend to use this device in the manner described below.
HAIR REMOVAL
Clean the treatment area and shave the hairs rst. If hairs are remain on skin,
hairs are burnt and might cause pain and skin troubles. You don’t need to
apply IPL gel for Hair removal.
SKIN REJUVENATION AND ACNE TREATMENT
Clean and clear the treatment area from any skin care or cosmetic products.
you may apply the VISS IPL Laser Skin rejuvenation Pre-treatment Conductive
Gel which comes along with Viss IPL skin rejuvenation system. As a IPL beginner,
you may apply the gel at rst treatment to prevent any problems.
If you have very sensitive skin, you should apply conductive gel before treatment.
But when you get used to IPL system, you don’t need to apply gel. After treatment
is done, wash away the gel applied.

5.2 Tanning Advice
SUN EXPOSURE BEFORE TREATMENT
• Wait at least 48 hours after sunbathing before you use this device.
Sunbathing can cause skin to darken (tan) and/or can cause
sunburn (reddening of the skin).
• After these 48 hours, check the skin for any remaining sunburn.
Do not use as long as sunburn persists.
• When the sunburn has disappeared, perform a skin test on the
area to be treated to determine the appropriate light intensity, see
‘First use’ section.
• If your skin is tanned, you run a risk of developing skin reactions,
perform a skin test on the area to be treated to determine the
appropriate light intensity, see ‘First use’ section.
SUN EXPOSURE AFTER TREATMENT
• Wait at least 24 hours after treatment before you expose treated
areas to the sun. Even after 24 hours, make sure that the treated
skin does not show any redness from the treatment anymore
before you expose it to the sun.
• It is recommended to apply the optional VISS IPL Hair Removal
Post-treatment Gel anytime you plan to expose the treated areas
to the sun or articial UV rays between treatments. Otherwise
you must either cover the treated areas or use non-perfumed sun
block with SPF 45+.
• Exposing treated areas to the sun immediately after treatment
without protection can increase the risk of adverse side eects
and skin reactions.
TANNING WITH ARTIFICIAL LIGHT
• Follow the instructions in ‘Sun exposure before treatment’ and
‘Sun exposure after treatment’ above.

Black
Hair
Dark
Brown
Hair
Brown
Hair
White
Always sunburn,
no tanning 6/7/8 6/7/8 6/7/8
Beige
Easy sunburn,
minimal tanning
6/7/8 6/7/8 6/7/8
Light Brown
Sometimes sunburn,
good tanning
4/5/6 4/5/6 4/5/6
Mid Brown
Rarely sunburn,
fast and good tanning
3/4/5 3/4/5 3/4/5
Dark Brown
Rarely sunburn,
very good tanning
1/2/3 1/2/3 1/2/3
Black
Rarely/never sunburn,
very dark tanning
X X X
1414
5.3 Recommended Light Intensities
There are eight available light intensities to suit your personal needs.
Use the table below to nd which one is appropriate for you.
NOTE : ‘X’ INDICATES THAT THIS SETTING IS NOT SUITABLE FOR YOUR SKIN/HAIR TYPE
Black
Hair
Dark
Brown
Hair
Brown
Hair
White
Always sunburn,
no tanning 6/7/8 6/7/8 6/7/8
Beige
Easy sunburn,
minimal tanning
6/7/8 6/7/8 6/7/8
Light Brown
Sometimes sunburn,
good tanning
4/5/6 4/5/6 4/5/6
Mid Brown
Rarely sunburn,
fast and good tanning
3/4/5 3/4/5 3/4/5
Dark Brown
Rarely sunburn,
very good tanning
1/2/3 1/2/3 1/2/3
Black
Rarely/never sunburn,
very dark tanning
X X X
I
II
III
IV
V
VI

Dark
Blonde
Hair
Light
Blonde
Hair
Red
Hair
White/
Grey
Hair
6/7/8 X X X
6/7/8 X X X
4/5/6 X X X
3/4/5 X X X
1/2/3 X X X
X X X X
Dark
Blonde
Hair
Light
Blonde
Hair
Red
Hair
White/
Grey
Hair
6/7/8 X X X
6/7/8 X X X
4/5/6 X X X
3/4/5 X X X
1/2/3 X X X
X X X X

6.1 Inserting / Replacing cartridge
VISS IPL lamp cartridges are designed to last 30,000 ashes for hair
removal. There is also an optional skin rejuvenation cartridge. After
its lifespan this cartridge will have to be replaced.
NOTE : REMOVE THE PLASTIC LAMP PROTECTOR ON NEW CARTRIDGES.
1. Make sure main
power switch is OFF
2. Pull out cartridge
while pushing on
the tabs
3. Insert new cartridge
making sure prongs
are properly aligned

6.2
* If you don’t lift the applicator out of device,
you won’t adjust the level.
Operation
1. Put on safety glasses.
2. Turn unit ON (main power switch &
power button).
3. Lift applicator out of its cradle and set
the appropriate intensity see ‘Setting
light intensity’ section (Ch. 6.2).
4. Place applicator on the desired area
making sure the silver sensor is placed
rmly against the skin (g. 1), the device
will not ash unless in proper contact
with skin. (g. 2)
5. Once a beep is heard and the green
‘ready to ash’ indicator light is ON, the
pulse is charged. (g. 3)
6. Press the ash button.
7. Unit will take 3.5 seconds to charge, at
that time a beep will be heard and ready
to ash indicator light will be ON.
8. Move over area slightly overlapping, the
9. As long as it feels comfortable (not painful), increase the setting
by one level and apply one ash for each setting.
10. Never ash the same area twice without lifting the device
o the skin. This prevents excessive heating and possible
burning of the skin
slight indentation in the skin should be
used as a guideline.
(g. 1)
(g. 2)
(g. 3)

6.3Average treatment schedule
Treatments vary from person to person below is a chart
demonstrating average results and what you can expect
from VISS IPL.
◆ Hair Removal :
month
4+ [ Schedule treatments once or twice a month ]
Progressive hair reduction will continue and you will see
dramatic results and slight re-growth.
Number of session treatments may depend on each person
and his/ her wishes.
month
2-3
[ Schedule treatments every 2 weeks ]
You will begine to see great reduction in the amount of
re-growth, especially in areas where hairs growth tends
to be dense.
month
1[ Treat the desired area twice a week. ]
You will begin to enjoy visible results within one month of
regular treatment. You will notice some hair reduction and
re-grow hairs will lighten and become finer.
◎ Tip : Treatments vary from person to person below is a chart
( 4 weeks )
( 8 weeks )
(16 weeks~)
Table of contents
Other Viss Hair Removal System manuals