Tria PRECISION User manual

PRECISION
HAIR REMOVAL LASER
Instructions for Use

skin tone chart
CHECK YOUR SKIN TONE to find out if
you can safely use the Tria Hair Removal
Laser Precision. Match the skin in the
area you wish to treat to the range of
skin tones shown on this chart. If your
skin tone matches any of the skin tones
labeled "Not Safe" for treatment, then
DO NOT USE the Tria Laser Precision.
INTENDED SKIN TONES:
NOT SAFE:
READ THESE INSTRUCTIONS
BEFORE USE
Before you use your new Tria Laser
Precision, read this booklet for
important information:
• Confirm that the Tria Laser Precision is
safe for you
• Learn how to use the Tria Laser Precision
• View our treatment results timeline
• Read our tips for best results
• Review contraindications and warnings,
which are marked with the symbol below:
This Warning Symbol appears next
to information about possible safety
risks. Be sure to read and follow all the
warnings and safety information.
We recommend that you save these
instructions for future reference. If you
have questions or concerns, please
contact Tria Beauty Customer Care
(see back cover).
Medium
Brown Dark Brown or
Black
White Ivory Beige Light
Brown
taBLe oF contents
INTRODUCTION 3
GETTING TO KNOW YOUR TRIA LASER PRECISION 4
WHAT THE TRIA LASER PRECISION IS USED FOR (INDICATIONS) 6
WHO SHOULD NOT USE THE TRIA LASER PRECISION (CONTRAINDICATIONS) 7
WARNINGS 8
BENEFITS AND RISKS 10
TRIA LASER PRECISION TREATMENT OVERVIEW 13
WHAT TO EXPECT 14
BEFORE YOUR FIRST TREATMENT 15
BEFORE EVERY TREATMENT 17
HOW TO TREAT 19
TAKING CARE OF YOUR TRIA LASER PRECISION 22
TROUBLESHOOTING 23
WARRANTY 27
TREATMENT SCHEDULE 33

2
triabeauty.ca
3
congratuLations on your
new tria Laser Precision
The Tria Hair Removal Laser Precision gives you permanent results
at home, unlike temporary solutions such as shaving and waxing.
The Tria Laser Precision works in the same way as professional laser
hair removal. It treats the hair follicle, not just the hair, giving you
permanent hair reduction after a series of treatments.
LET’S GET STARTED!
introduction
HOW DOES LASER
HAIR REMOVAL WORK?
The Tria Laser Precision deactivates the
follicles in your skin that produce hair. It
emits a pulse of laser light, which heats
up the dark pigment inside the hair and
deactivates the hair follicle. That’s why it
can deliver permanent results and works
only on naturally brown or black hair.
To be most effective, the Tria Laser
Precision needs to treat each hair follicle
during its active growth period. Hair
grows in cycles, so multiple treatments
are necessary. For best results, treat
every two weeks for up to 3 months or
until you are satisfied with the amount
of hair reduction.

4
triabeauty.ca
5
getting to know your tria Laser Precision
CHARGER SOCKET
Plug the power cord
into this socket
POWER BUTTON
Adjusts the treatment
level and turns the
Tria Laser Precision
on and off
BATTERY CHARGER
Charges the Tria Laser
Precision. The Tria Laser
Precision will not operate
while plugged in.
POWER CORD
Connects the device and
the battery charger
INDICATOR LIGHTS
Indicates power on,
treatment level, battery
charge, skin sensor lock
and error status
INDICATOR LIGHTS GUIDE
TREATMENT WINDOW
Delivers laser light
during treatment
SKIN SENSOR
A safety feature
that unlocks the
Tria Laser Precision
BOTTOM OF DEVICE
Other IndicatorsTreatment Levels
Low Medium High O Skin Sensor
Locked
Fully Charged
(when
plugged in)
Error
(3 flashing)

6
triabeauty.ca
7
what the tria Laser Precision is used For
(indications)
The Tria Hair Removal Laser Precision
is used to remove unwanted hair. It is
an over-the-counter system intended
for adjunctive use with shaving for
hair removal sustained with periodic
treatments. It is also intended for
permanent reduction in hair regrowth
defined as long-term, stable reduction
in the number of hairs regrowing when
measured out to 6, 9 and 12 months after
the completion of the treatment regimen.
It is intended for use only on light to
medium skin tones (see the Skin Tone
Chart on the inside front cover) and
naturally brown or black hair. It will not
work on white, grey, blonde, or red hair.
who shouLd not use the tria Laser
Precision (contraindications)
DO NOT USE the Tria Laser Precision
if your skin tone matches one listed as
“Not Safe” on the Skin Tone Chart on
the inside front cover of this booklet.
If you use the Tria Laser Precision on skin
“Not Safe” for treatment, the skin may
absorb too much laser light and be
injured (burned, discolored, or scarred).
PLEASE NOTE: The skin sensor is a
safety feature that unlocks the Tria Laser
Precision. If it is not safe for you to use
the Tria Laser Precision, you won’t be
able to unlock it with the skin sensor.
DO NOT USE the Tria Laser Precision
if you are under the age of 18 or use
it on anyone else under the age of 18.
The use of the Tria Laser Precision
on or by children has not been studied
and could result in serious injury.
DO NOT USE the Tria Laser Precision
if you have a lighter hair color, such
as blonde, white, red or grey. In order
for the laser to work, you must have
naturally dark hair where you are
treating. Lighter hair pigments will not
absorb enough of the laser's energy
to disable the hair follicle.

8
triabeauty.ca
9
warnings
DO NOT USE the Tria Laser Precision
on or around the eyes, eyebrows, or
eyelashes. Doing so can cause permanent
eye injury.
DO NOT USE the Tria Laser Precision
if the Skin Tone Chart shows that your skin
tone is not suitable. If you have African,
Indian, Native American or Pacific Island
heritage, you may have a skin tone that
is not suitable—be sure to check the Skin
Tone Chart. Darker skin tones can absorb
too much laser light, which can injure
the skin.
DO NOT USE the Tria Laser Precision
anywhere on the ears, nipples, genitals or
around the anus. These areas may have
more sensitive skin, a darker skin tone,
and/or a greater hair density, and using
the Tria Laser Precision there may cause
serious skin injury.
DO NOT USE the Tria Laser Precision
on parts of your skin that are darker than
your usual skin tone: tattoos, dark brown
or black spots (such as large freckles,
birthmarks or moles), or skin that is red
or swollen from a previous treatment.
Dark skin may absorb too much laser
light, which can injure the skin.
DO NOT USE the Tria Laser Precision
on a man’s face, jaw or neck. The hair
in a man’s beard area is too dense, and
using the Tria Laser Precision in these
areas may result in skin injury.
Hair removal by laser can cause
increased hair growth in some individuals.
Based upon currently available data, the
highest risk groups for this response are
females of Mediterranean, Middle Eastern
and South Asian heritage treated on the
face and neck.
DO NOT USE the Tria Laser Precision
on damaged skin, including open
wounds, cold sores, sunburns or areas
where you have had a skin peel or other
skin resurfacing procedure within the
last 6–8 weeks (check with your doctor).
These conditions can make the skin
more susceptible to injury.
DO NOT USE the Tria Laser Precision
if you are pregnant or breast-feeding.
The Tria Laser Precision has not been
tested on pregnant women. Hormonal
changes could increase skin sensitivity
and the risk of skin injury.
DO NOT USE the Tria Laser Precision
if it appears damaged, and DO NOT
attempt to open or repair the Tria Laser
Precision. These actions increase the
risk of skin or eye injury. Please contact
Customer Care for assistance.
Always follow basic safety
precautions for electrical devices:
DO NOT get the Tria Laser Precision
or the charger damp or wet. DO NOT
use the Tria Laser Precision while
bathing or put it next to a tub or sink.
DO NOT operate a charger with a
damaged plug or cord. ALWAYS keep
the cord away from heated surfaces.
Failure to follow these precautions can
cause electrocution or electric shock.
DO NOT USE the Tria Laser Precision
for any purpose other than hair removal.
The Tria Laser Precision is for
personal use. The Tria Laser Precision
is not for use in a medical office, clinic,
salon or other commercial setting.
DO NOT USE the Tria Laser Precision
on any area where you may someday
want your hair to grow back. The results
may be permanent and irreversible.

10
triabeauty.ca
11
Laser Radiation. Do Not View
Directly with Optical Instruments. Class
1M Laser Product.
Viewing the laser output with certain
optical instruments (for example eye
loupes, magnifiers, and microscopes)
within a distance of 100 mm may pose
an eye hazard.
A medically supervised clinical study
has shown that the Tria Laser Precision
is safe and works when used as directed.
Seventy-nine (79) users performed a
6-week course of treatment
(3 treatments) and all side effects
were observed. The number of hairs
at each treatment site was counted
before each treatment and at 1, 2, 3, 6,
and 12 months after the last treatment.
No additional treatments were
performed after the third treatment.
BENEFITS
When used as directed, the Tria Laser
Precision gives you permanent results.
The results vary from person to person
and depend on which body area is
treated and how closely treatment
instructions are followed. The clinical
study demonstrated the following
benefits:
BeneFits and risks
• 61% average reduction in hair count
3 weeks after the first treatment
• 70% average reduction in hair count
3 weeks after the second treatment
• 60% average reduction in hair count
1 month after the third treatment
• 6% average reduction in hair count
3 months after the third treatment
• 33% average reduction in hair count
12 months following the third treatment
In the study, 69 of 79 users (87%)
reported finer hair at 1 month after the
last treatment than before any treatment.
And 55 of 79 users (70%) reported
lighter hair at 1 month after the last
treatment than before any treatment.
These results were obtained with only
3 treatments. For best results, treat
every 2 weeks for 3 months or until
you are satisfied with the amount of
hair reduction.
RISKS
It is important to use the Tria Laser
Precision properly. Make sure that you
understand and follow all warnings
(see page 8). The skin sensor will prevent
use of the device on contraindicated skin
types (see page 7).
If you use the Tria Laser Precision as
directed, the risks are low:
• In the clinical study, almost all users
reported mild to moderate pain or
discomfort during their first treatment,
with a reduction in sensitivity reported
in their later treatments. This is normal.
You may feel warmth, burning, tingling
or itching; some users described feeling
the same level of discomfort as when
a rubber band snaps against the skin.
If the pain is too intense or persists after
a treatment, stop using the Tria Laser
Precision and check with your doctor
before using it again.

12
triabeauty.ca
13
• Your skin may become red right after
treatment or within 24 hours. This redness
generally clears up within a few hours.
See your doctor if the redness does not
go away within 2-3 days.
• In rare cases, some users may see an
increase in the number of hairs in the
treated area after the initial treatment.
If this increase persists over several
treatments, stop using the Tria Laser
Precision and see your doctor.
The following symptoms affected no
users in the clinical study (0 out of 88)
but have been reported with other hair
removal lasers:
• Skin swelling, especially around the hair
follicle. If the swelling doesn’t go away
within 2-3 days, stop using the Tria Laser
Precision and see your doctor.
• Temporary or permanent skin discoloration.
If your skin color changes, stop using the
Tria Laser Precision and see your doctor.
• Blisters. This is very unlikely for people
with a light or medium skin tone. If you
do develop a blister, stop using the Tria
Laser Precision and don’t let the blister
become infected. Consult your doctor
if needed.
tria Laser Precision treatment overview
BEFORE YOUR FIRST TREATMENT
• Six weeks before your treatment, stop
waxing or plucking hair and do not get
a skin peel.
• At least 1 day before treatment, perform
a patch test on your skin (see page 16).
BEFORE EVERY TREATMENT
• Charge your Tria Laser Precision
(see page 15)
• Unplug it from the battery charger
• Cleanse, shave, and dry your skin
(see page 17)
• Turn on the Tria Laser Precision
(see page 17)
• Unlock it with the skin sensor located
in the tip (see page 17)
• Set the treatment level (see page 18)
BETWEEN TREATMENTS
• Shave, but don’t wax or pluck hair.
TREAT UNTIL YOU’RE DONE
• Be consistent and follow treatment
instructions.
• For best results, treat every 2 weeks
for up to 3 months or until you see the
desired results.

14
triabeauty.ca
15
what to exPect
WHILE USING THE TRIA
LASER PRECISION
• The sensation varies, depending
on the person, treatment area and
treatment level. Some users may
feel the sensation of a rubber band
snapping on the skin. Others will feel
a warm, prickling sensation.
• As the amount of hair in the treated
areas decreases, the sensation will
also decrease. For this reason, you
may be able to use a higher treatment
level after your initial treatments.
• Some users experience mild redness
that goes away within 24 hours.
DURING YOUR FIRST 3 MONTHS
OF TREATMENT
• After your first treatment, there will
be no visible change to the hair. Laser
hair removal does not cause hair to
immediately fall out.
• With additional treatments, there will
be a gradual reduction in the number of
hairs with each treatment.
• The hair that does regrow will also begin
to lighten and become finer.
AFTER 3 MONTHS OF TREATMENT
• Hair follicles that have been deactivated
by the Tria Laser Precision will not
regrow hair.
• Do occasional touch-ups or additional
treatments if necessary.
BeFore your First treatment
CHARGE THE TRIA LASER PRECISION
Charge the Tria Laser Precision for at
least 2 hours before you use it or anytime
the battery is low (device automatically
turns off). If you are covering multiple
areas or have the Tria Laser Precision set
to a high treatment level, you may need
to charge the Tria Laser Precision in the
middle of a treatment. This is normal.
To charge:
1. Insert the power cord into the battery
charger and the Tria Laser Precision.
Then plug the battery charger into a
power outlet.
2.The indicator lights will flash one after
another while the Tria Laser Precision
is charging.
3.Once fully charged, indicator lights will
stop flashing and stay green and you
may unplug the charger. The Tria Laser
Precision can remain plugged in for
extended periods of time without damage.
NOTE: To prevent damage to your Tria
Laser Precision, use only the included
Tria battery charger. If you lose the
charger, please contact Customer Care.

16
triabeauty.ca
17
TEST THE LASER ON A PATCH OF SKIN
Before your first full treatment on a new
area of your body, we recommend you
test the Tria Laser Precision on a patch
of skin there and try different treatment
levels, starting at Low.
1. Prepare your skin and unlock the Tria
Laser Precision (see page 17). The Tria
Laser Precision will be set to Low.
2.Place the treatment window flat against
your skin, and test one laser pulse.
3.If Low was tolerable for you, then move
to another test area and increase to
Medium, testing a patch at that level with
one laser pulse. To adjust the Tria Laser
Precision setting up or down, press the
power button (see page 18).
4.If Medium was tolerable for you, change
test locations and increase to High, testing
a patch at that level with one laser pulse.
5.Wait 24 hours and then examine the
test areas. If the skin appears normal,
start your first treatment at the highest
level you are comfortable using.
Retest your skin if your skin tone changes
dramatically (due to tanning).
If you notice blistering, burns,
changes in your skin tone or any other
side effects, or if you are not sure
about the outcome of the test, DO NOT
USE your Tria Laser Precision. Contact
Customer Care or your doctor.
PREPARE YOUR SKIN
1. Cleanse the treatment area, removing all
cosmetics, lotions, and creams that may
block the laser light.
2.Shave the treatment area. This removes
the surface hair, which improves comfort
and allows the laser light to better reach
the hair in the follicle.
3.Dry the treatment area.
UNLOCK THE LASER
The Tria Laser Precision will lock when
it’s not in use. A locked device is indicated
by the lit top and bottom indicator lights.
To unlock the Tria Laser Precision, use
the skin sensor, which helps confirm that
the Tria Laser is safe for your skin tone.
1. Unplug the Tria Laser Precision from
the battery charger and press the power
button to turn it on.
2.To unlock, hold the device tip with the
built-in skin sensor against the skin in
the area you wish to treat. The skin sensor
will automatically sense and check your
skin. If the Tria Laser Precision is safe for
your skin tone, the laser will emit a series
of beeps and unlock.
BeFore every treatment

18
triabeauty.ca
19
3.If the top and bottom lights remain lit
and you do not hear a series of beeps,
then it may not be safe for you to use
the Tria Laser Precision. Or, you may be
using the skin sensor incorrectly and
need to try again. To try again, lift the
device tip from your skin and follow
Steps 1 and 2 above. If you still cannot
unlock the Tria Laser Precision, please
contact Customer Care for assistance.
SET THE TREATMENT LEVEL
The Tria Laser Precision offers three
different treatment levels: low, medium
and high. In a clinical study, higher
levels were found to be 2-3 times
more effective. So for best results,
we recommend you use the highest
level that you can tolerate.
When the Tria Laser Precision is on
and unlocked, press the power button
to select your desired treatment level.
Each time you press the power button,
the level will increase. Once the Tria
Laser Precision is at the maximum level,
pressing the power button again will
return it to the lowest level.
Treatment Levels
how to treat
1. TURN ON THE LASER, UNLOCK IT
AND SET THE TREATMENT LEVEL
(SEE PAGES 17-18)
2.TOUCH AND HOLD THE TREATMENT
WINDOW TO THE SKIN UNTIL YOU
HEAR A BEEP
• If you do not hear a beep, make sure
that the treatment window is flat against
your skin. The laser will only pulse when
the entire window is touching your skin.
• If you hear a buzzing tone instead of a
beep, you lifted the device from the skin
before the pulse was over. It is normal for
time between beeps to lengthen as you
progress through each treatment. This
should not affect your results.
Low High Medium

20
triabeauty.ca
21
3.LIFT THE LASER AND PLACE IT BACK
ON THE SKIN SO THAT IT OVERLAPS
THE PREVIOUS SPOT
• Each time you reposition the treatment
window, move it about half the distance
of the window (about 1/4 inch or 5 mm).
• This creates an overlapping pattern in
the treatment area, which ensures you
cover all the hair follicles. This works out
to about 25 laser pulses per square inch
or 40 pulses per 10 square cm.
DO NOT treat repeatedly in the
same spot. Always move the treatment
window to a new area after each laser
pulse. Failure to do so may result in
discomfort or skin heating, which could
cause skin injury.
4.KEEP GOING UNTIL YOU HAVE
COMPLETELY COVERED THE AREA
YOU WANT TO TREAT
Always follow the treatment instructions
and warnings provided in this booklet.
NOTE:You may need to recharge
the Tria Laser Precision when treating
multiple areas.
5.TURN OFF THE LASER BY HOLDING
DOWN THE POWER BUTTON
Repeat treatments every 2 weeks for
up to 3 months or until you reach the
desired results.
NOTE: It is normal for the cooling
fan to turn on and off and emit warm
air through the bottom vent during
treatment.

22
triabeauty.ca
23
taking care oF your tria Laser Precision
The Tria Laser Precision doesn’t require
special care, but we do recommend
that you keep it clean, especially the
treatment window.
CLEANING INSTRUCTIONS
• Make sure that the Tria Laser Precision
is turned off and unplug the battery
charger from the Tria Laser Precision
and the power outlet.
• To clean the Tria Laser Precision and
battery charger, moisten a soft cloth
with water and mild soap, and wipe the
treatment window and the exterior of
the device. Be careful not to damage
the treatment window. Allow to dry
completely before charging or turning
on your Tria Laser Precision.
DO NOT get the Tria Laser Precision
or battery charger wet. If it gets wet,
DO NOT use the Tria Laser Precision or
the battery charger. Call Customer Care.
Performing a treatment with a wet Tria
Laser Precision (or component) can
cause electrocution or electric shock.
LONG-TERM STORAGE
If you do not plan on using your device
for a long period of time, we recommend
that you recharge the device every
3 months to maintain the life of the battery.
RECYCLING/DISPOSAL
The Tria Laser Precision contains lithium
batteries that cannot be replaced.
To recycle or dispose, please follow the
regulations where you live or contact
Customer Care for information.
YOUR QUESTION IT’S POSSIBLE THAT HOW TO TROUBLESHOOT
My Tria Laser
Precision won’t
turn on.
Your Tria Laser Precision
is not charged.
Charge your Tria Laser
Precision. (see page 15)
While I’m charging
my Tria Laser
Precision, the
indicator lights do
not flash one after
another.
Your Tria Laser Precision
is not connected properly.
Confirm that your Tria Laser
Precision is firmly plugged
into the battery charger and
the wall outlet.
Your Tria Laser Precision is
already fully charged and
ready to use.
Unplug the battery charger
from the wall and from the
Tria Laser Precision.
Even after I charge my
Tria Laser Precision,
the indicator lights do
not fully light up.
Your Tria Laser Precision
isn’t fully charged.
Charge your Tria Laser
Precision. (see page 15)
trouBLeshooting
Please call Customer Care for additional help.

24
triabeauty.ca
25
YOUR QUESTION IT’S POSSIBLE THAT HOW TO TROUBLESHOOT
When I put my
Tria Laser Precision
against my skin,
nothing happens.
Your Tria Laser Precision
is locked.
The Tria Laser Precision
will lock when it’s not in
use. Unlock your Tria Laser
Precision with the skin
sensor. (see page 17)
Your Tria Laser Precision
is plugged into the
battery charger.
Your Tria Laser Precision
will not work when it is
plugged into the battery
charger. Unplug your Tria
Laser Precision.
The treatment window
isn’t completely in
contact with your skin.
Confirm that the treatment
window is completely flat
against your skin.
The area you’re trying to
treat is too small, curved,
or bony to treat.
Try again, pulling the skin
flat. If you can’t get the
entire treatment window to
touch the treatment area,
then the Tria Laser Precision
won’t work on that area.
YOUR QUESTION IT’S POSSIBLE THAT HOW TO TROUBLESHOOT
I can’t use my Tria
Laser Precision, and
the top and bottom
indicator lights are lit.
Your Tria Laser Precision
is locked.
The Tria Laser Precision
will lock when it’s not in
use. Unlock your Tria Laser
Precision with the skin
sensor. (see page 17)
The indicator lights
are flashing quickly.
Your Tria Laser Precision
is not working properly.
Please contact Customer
Care for assistance.
Dirt or debris is stuck
to the treatment
window.
Your Tria Laser Precision
needs to be cleaned.
See cleaning instructions on
page 22. If you can’t get the
area clean, contact Customer
Care for assistance.
I tried to unlock the
Tria Laser Precision,
but it’s still locked.
It may not be safe for
you to use the Tria Laser
Precision.
Match your skin tone to
the Skin Tone Chart on the
inside cover of this booklet,
and contact Customer Care
with any questions.
You didn’t use the skin
sensor correctly.
Try again, holding the skin
sensor flat and firm against
your skin. (see page 17)

26
triabeauty.ca
27
YOUR QUESTION IT’S POSSIBLE THAT HOW TO TROUBLESHOOT
When I reposition the
Tria Laser Precision, it
seems to take a long
time before the next
pulse of laser light.
The room is warm. The
Tria Laser Precision may
pulse at a slower rate in a
warm environment.
Use the Tria Laser Precision
in a cooler environment.
My Tria Laser
Precision was working
properly, but then it
stopped working. The
indicator lights are
o and do not turn on
even when I press the
power button.
The battery needs to
be charged.
Charge your Tria Laser
Precision. (see page 15)
When I’m using my
Tria Laser Precision, I
can hear a fan working.
This is normal. Continue your treatment.
Limited warranty
The Tria Laser Precision comes with a
1-year limited warranty detailed below.
What is not covered by the limited warranty?
This 1-year limited warranty covers
defects in materials and workmanship
in your Tria Laser Precision if you
purchased it from an authorized partner
or directly from the manufacturer (Tria
Beauty). Your 1-year limited warranty
is valid for you alone, the original
purchaser, and cannot be transferred.
What is not covered by the limited warranty?
This limited warranty is effective only if
the Tria Laser Precision is purchased and
used in the United States, Canada or the
United Kingdom. This limited warranty
does not cover damage, defects or failure
caused by abuse or misuse; improper
care; impact or insertion of foreign
objects; vandalism; improper storage;
improper or incorrectly performed
maintenance or repair; application of
harmful chemicals; Acts of God, fire, or
water; abrasives; negligence; failure to
follow manufacturer's instructions; loss
of the Tria Laser Precision; normal wear
and tear; alteration; overuse; professional
use; or commercial use.
How long does this limited warranty last?
The limited warranty begins on the date
of purchase and expires one year later.
The warranty period is not extended
for any period during which the Tria
Laser Precision (or any parts thereof)
is in repair or if your Tria Laser Precision
is replaced by Tria Beauty during the
warranty period.
What will Tria Beauty do if your Tria
Laser Precision is defective?
If you discover a covered defect in your
Tria Laser Precision before the 1-year
warranty period expires, contact Customer
Care for assistance. If we confirm a defect
covered by this limited warranty, it will be

28
triabeauty.ca
29
Tria Beauty’s decision as to whether
we will: (i) replace your Tria Laser
Precision with either a new or a
refurbished Tria Laser Precision that
is the same as or similar to the Tria
Laser Precision you purchased; or
(ii) repair your Tria Laser Precision
using either new or refurbished parts.
If we find that the defect in your Tria
Laser Precision is not covered under
this limited warranty, we will notify you
about the service alternatives that are
available on a fee basis.
If we find that your Tria Laser Precision
is not defective, we will notify you and
return your Tria Laser Precision to you.
All Limited Warranty services must
be authorized and performed by Tria
Beauty or a service provider authorized
by Tria Beauty.
WARRANTY LIMITATIONS
AND DISCLAIMERS
THIS WARRANTY GIVES YOU SPECIFIC
LEGAL RIGHTS, AND IS IN ADDITION
TO YOUR STATUTORY RIGHTS.
YOUR REMEDIES FOR THE BREACH
OF THIS LIMITED WARRANTY ARE
LIMITED SOLELY TO THE REPAIR AND
REPLACEMENT OF YOUR TRIA LASER
PRECISION AS SET FORTH IN THIS
WARRANTY STATEMENT.
TO THE MAXIMUM EXTENT PERMITTED
BY APPLICABLE LAW, TRIA BEAUTY
DISCLAIMS ALL IMPLIED WARRANTIES.
IF APPLICABLE LAW DOES NOT
PERMIT THE DISCLAIMER OF IMPLIED
WARRANTIES, THEN THE DURATION OF
IMPLIED WARRANTIES ARE HEREBY
EXPRESSLY LIMITED TO THE DURATION
OF THE EXPRESS LIMITED WARRANTY
SET FORTH ABOVE. IN NO EVENT
SHALL TRIA BEAUTY BE LIABLE
FOR ANY SPECIAL, INCIDENTAL,
CONSEQUENTIAL, PUNITIVE, OR
INDIRECT DAMAGES BASED UPON
BREACH OF WARRANTY, BREACH
OF CONTRACT, TORT (INCLUDING
NEGLIGENCE OR STRICT PRODUCT
LIABILITY), OR OTHERWISE, EVEN
IF TRIA BEAUTY IS ADVISED OR
AWARE THAT SUCH DAMAGES MIGHT
ARISE. SUCH DAMAGES INCLUDE,
BUT ARE NOT LIMITED TO, LOSS OF
USE OF THE TRIA LASER PRECISION,
COST OF ANY SUBSTITUTE EQUIPMENT,
THE CLAIMS OF THIRD PARTIES, OR
DAMAGE TO PROPERTY.
IF THE APPLICABLE LAW DOES NOT
ALLOW LIMITS ON WARRANTIES, OR
ON REMEDIES FOR BREACH IN CERTAIN
TRANSACTIONS, THE LIMITS IN THIS
PARAGRAPH AND THE DISCLAIMER OR
EXCEPTIONS FROM WARRANTY MAY
NOT APPLY. THIS LIMITATION DOES
NOT APPLY TO CLAIMS FOR DEATH
OR PERSONAL INJURY CAUSED BY A
DEFECT IN THE TRIA LASER PRECISION
OR ANY OTHER LIABILITY THAT
CANNOT BE EXCLUDED OR LIMITED
BY LAW.
THESE WARRANTY TERMS, CONDITIONS,
AND LIMITATIONS ALLOCATE THE RISKS
OF PRODUCT FAILURE BETWEEN TRIA
BEAUTY AND YOU, THE PURCHASER
OF THE TRIA LASER PRECISION. THIS
ALLOCATION IS RECOGNIZED BY BOTH
PARTIES AND IS REFLECTED IN THE
PRICE OF THE TRIA LASER PRECISION.
BY USING THE TRIA LASER PRECISION
YOU ACKNOWLEDGE THAT YOU HAVE
READ THESE TERMS, CONDITIONS, AND
LIMITATIONS, UNDERSTAND THEM, AND
ARE BOUND BY THEM.

30
triabeauty.ca
31
PRODUCT CHANGES
Tria Beauty reserves the right to make
changes and improvements to its
products without incurring any obligation
to incorporate such improvements in
products previously sold.
DISPUTES
This warranty and any dispute or
claim arising out of or in connection
with it or its subject matter or formation
(including non-contractual disputes
or claims) shall be governed by and
construed in accordance with the law
of the country of purchase (US, Canada
or England and Wales).
You agree that the courts of the country
where you purchased the Tria Laser
Precision shall have non-exclusive
jurisdiction to settle any dispute or claim
that arises out of or in connection with
this warranty or its subject matter or
formation (including non-contractual
disputes or claims).
TIME FOR FILING CLAIMS
Any claim for breach of this limited
warranty must be commenced by within
twelve (12) months from the original
purchase date of the Tria Laser Precision.
NO OTHER WARRANTIES
Unless modified in a writing signed
by both parties, these warranty
terms, conditions, and limitations are
understood to be the complete and
exclusive agreement between the parties,
superseding all prior agreements and
representations, oral or written and all
other communications between the
parties relating to the subject matter of
these warranty terms. No employee of
Tria Beauty or any other party (including
without limitation distributors, dealers,
and retailers) is authorized to make any
warranty in addition to those made herein.
MISCELLANEOUS TERMS
As used in this contract, “our” “we”
and “us” refer to Tria Beauty. “You”
refers to the original purchaser of the
Tria Laser Precision. A waiver of strict
compliance with any term herein shall
not be deemed a continuing waiver or
waive any other terms or conditions.
We shall be excused from performance
to the extent of any delay or inability
to perform arising due to weather events,
disasters, acts of terror, governmental
action or regulation, labor or materials
shortages or disputes, or other
circumstances not under our control.
If any term herein is illegal, invalid,
or unenforceable, then such term shall
be ignored, but the remaining terms
and conditions shall remain in effect.

32
triabeauty.ca
33
LASER TYPE: Diode laser
LASER CLASS: 1
OUTPUT WAVELENGTH: 810 nm
OUTPUT FLUENCE: 7-20 J/cm2
BATTERY CHARGER INPUT: 100-240 V~ 50-60 Hz, 0.15A
BATTERY CHARGER OUTPUT: 5 V DC 1.0 A
technicaL sPeciFications treatment scheduLe
DATE BODY AREA MINUTES
Use this helpful schedule to keep track of your Tria Laser Precision treatments.

34
triabeauty.ca
35
DATE BODY AREA MINUTES
Warning Symbol
Laser Warning Symbol
WEEE Symbol
Type BF Symbol
Serial Number Symbol
symBoL gLossary
CE Mark
Date of Manufacture Symbol
Manufacturer Symbol
Temperature Limitation Symbol

PRECISION
ÉPILATION AU LASER
Instructions d’utilisation