Vitrum Home Master User manual

HOME CONTROL
THINK SIMPLE
EN
Home Master for iPad
Handbook

1. Connect Home Master Router to your network
The Home Master Router has to be connected to your local network through an ethernet
cable, and 24 hours powered through the power cable for your country.
Check your network devices and find a free plug for the LAN port. Use a standard
ethernet cable to connect your network to the home master router LAN1 port.
Home Master Router factory settings uses DHCP, so your local network has to be
configured to provide DHCP.

2. Your iPad on local network
To log in the Home Master Router you have to be be connected to the WiFi in your
local network with your iPad or other iOS device.
The WiFi connection symbol should be displayed. All the wireless lan networking is
setup correctly if you can browse the internet from your iPad. Otherwise check the iPad
and your Access Point documentation to set up the system correctly.

3. Auto discovery
To connect your iPad to the Home Master Router simply open the Connection page.
Select the router and login with factory username “ths” and password “ths”.
The zero-configuration system checks automatically for Home Master Router(s)
connected to your local network. After logging in with the correct username and
password you will be able to customize the device name and all these informations.

4. Z-Wave devices network
The Home Master Router has to log in to the Z-Wave network. You need your Home
Master Remote Control in your hands.
The Home Master Remote Control needs to have all your Z-Wave devices correcly
included before this step.
Check the remote control manual for details on inclusion procedure. This operation
can be repeated all the times a new Z-Wave device is included in the home network.
The first time the Home Master Router is logged in, the Z-Wave network master
controller replication page will open automatically. Next times it can be easily accessed
through the “Setup” button in the Home Control main page.

5. Control your home devices
You are now able to control all your home network devices in realtime through the
Home Control main page.
The Home Control main page devices are arranged in a non organized order on the
screen. You are able to turn on and off lights, manage dimmers and curtains.
Pinch with two finger to magnify the view and slide it left-right and up-down with
one finger.
When a setting is changed, a small waiting indicator appears to show that the
command is being applied. However, the value should change within a few seconds
after your command.

6. Customizing environment display
You can customize position, color and label of every block representing your home
network device.
Press the “edit” button and you’ll be able to surf in a wider area where you can
arrange all the blocks. Keep pressed a block for a bit to move it. When selected, you
can change its color or label. By selecting “hide” on the toolbar the block will not be
visible when closing “edit” view.

7. Customizing the sidebar
Every block of your home network view can be placed to the sidebar. It will always be
easily reachable in large networks.
Simply drag a block to the sidebar to dock it automatically. The order of the objects in
the sidebar can be changed by dragging one block over another. Every block on the
sidebar can be dragged back to the main view if needed.

8. Adding virtual modules
You can add virtual modules to execute commands not available in your phisical home
network. The module can issue “all off”, “scene” recording and restoring, etc.
In the “setup” page select “Add virtual module”. The available modules will be listed.
Click on a module to add it to your system. You can add a module multiple times.
Go back to the environment control main page to setup and use these modules.

9. More informations
Connect to www.thinksimple.it for more informations about Home Master for iPad
application, and more installation instructions details.
In the main information page you can find the “Tutorial” button to read again this
manual, the “Demo” button to access to a number of simulated environments.
If you’re setting up your new Home Master Router, and everything is connected, press
“Use” and have fun setting up your home network control system.

HOME CONTROL
THINK SIMPLE
by
Think Simple SpA
Head Office
viale Lino Zanussi, 3 Tel [phone]
33170 Pordenone Fax [phone]
Sales Office
corso Garibaldi, 86 Tel [phone]
20121 Milano Fax [phone]
www.thinksimple.it [email protected]