
Technical data
square
MountingSet Furniture
MountingSet Inwall / MountingSet Inwall ZERO
-Installation guide Inwall
-square flush mounting box
-Power supply (IN 100-240 Vac, 50 - 60 Hz, OUT 12 Vdc) with pre-installed square power cable (including
usage guidelines and installation guide)
-Fastening screw packet (for attaching square) with various length screws (see „Installation“ section)
For MountingSystem ZERO: Installation guide, flush mount frame with reinforcing grid
Voltage: 230 Vac, 50-60 Hz
Power consumption: 18 Watt
Please note the operating instructions of the power supply.
-Cutting measurements for installation in furniture
-Power supply (IN 200-240 Vac, 50 Hz, OUT 12 Vdc) especially for furniture installation, incl. separate
instruction manual
-5m connection cable (to connect power supply and square)
-1m power supply cable (to connect power supply and wall socket)
-Spax-S back panel screws: 4 pieces 3x25 and 4 pieces 3,5x25
Voltage: 200-240 Vac, 50 Hz
Power consumption: 15 Watt
Please note the operating instructions of the power supply.
-User manual square
-square
Please note! External cable, power supply and mounting screws are included in square MountingSet.
Electrical operation of square is permitted only in connection with square Mounting Set
and power supply and cable included in the Mounting Set. Operation of square without a
Mounting Set will lead to immediate loss of guarantee and warranty.
Low voltage: 10-18 Vdc
Power consumption: 15 Watt
Disconnect from power
supply
The square can be disconnected from the main voltage through the ground wire of the room.
All squares have CE certification. square is quality "Made in Germany". We use only high-quality parts and
components produced by market leaders. square customers are proud of their iPad Garage.
*) Technical changes and mistakes are excepted.