Vivo MOUNT-XSSU1 User manual

Wall and Under Desk Mount for Xbox Series S
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/mount-xssu1
SKU: MOUNT-XSSU1
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
ASSEMBLY STEPS
PACKAGE CONTENTS
WARNING!
E (x5)
ST5x20mm
F(x5)
ST5x30mm
G(x5)
Drywall Anchor
If you do not understand these directions, or if you have any doubts about the safety of the installation,
please call a qualified technician. Check carefully to make sure there are no missing or defective parts.
Improper installation may cause damage or serious injury. Do not use this product for any purpose that is
not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or
injury caused by improper mounting, incorrect assembly or inappropriate use.
NOTE: SOME HARDWARE MAY NOT BE USED
C(x2)
Silver M4x5
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
A (x1)
Mount
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
TOOLS NEEDED
Drill
17.6lbs
(8kg)
B (x1)
Locking
Bracket
STEP 1
Place Mount (A) against the wall at
the desired location and mark drilling
locations with a pencil. Use of a level and a
stud finder is recommended.
Phillips
Screwdriver
OPTION A: Wood Stud Installation
Drill 1.5” (38mm) deep holes using a
3/32” (2.5mm) drill bit. Follow drywall
installation instructions for all remaining
mounting holes.
Install the Mount (A) using ST5x30mm
screws (F) and Drywall Anchors (G).
STEP 2
A
G
F
A
D(x2)
Black M4x5
NOTE: It may be mounted in either vertical
or horzontal orientation.

3
STEP 2 (Continued)
OPTION B: Drywall Installation
Using a 5/16” (8mm) drill bit, drill fully through the drywall. Insert the anchors (G) in the
holes.
Install the Mount (A) to the wall using ST5x30mm screws (F) with a Phillips screwdriver.
STEP 2 (Continued)
OPTION C: Under Desk Installation
Drill 3/8” (10mm) deep holes using a 1/8” (3mm) drill bit.
Install the Mount (A) to the desk using the ST5x20mm screws (E) with a Phillips screwdriver.
STEP 3
Install the Xbox into the Mount (A) with the circluar black vent facing away from the
mounted serface.
Install the Locking bracket (B) onto the mount (A) using the M4x5 bolts (C or D). The
locking bracket should be against the back side of the Xbox if installed correctly.
A
B
C or D
A
A
E
A
G
F
NOTE: It may be mounted in either
vertical or horzontal orientation.

LAST UPDATED: 04/15/2021
REV1.1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303