Vivo STAND-TDML1 User manual

Universal Laptop Stand for Treadmill
Scan the QR code with your mobile device or follow the link
for helpful videos and specications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-tdml1
SKU: STAND-TDML1
[email protected] www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
TOOLS NEEDED
8.8lbs
(4kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
Phillips
Screwdriver
A (x2)
Crossbar
B(x1)
Center Brace
C (x1)
Adjustment
Bracket
S-A (x4)
M5x14mm Screw
S-B (x4)
M5 Washer
D (x1)
Center Pole
E (x1)
Laptop Tray
G (x1)
Security Strap
If you do not understand these directions, or if you have any doubts about the safety of the installation,
please call a qualied technician. Check carefully to make sure there are no missing or defective parts.
Improper installation may cause damage or serious injury. Do not use this product for any purpose that is
not explicitly specied in this manual. Do not exceed weight capacity. We cannot be liable for damage or
injury caused by improper mounting, incorrect assembly or inappropriate use.
S-C (x4)
M5 Nut
F (x1)
VESA Plate
WARNING THIS MOUNT IS INTENDED FOR USE WHILE WALKING.
DO NOT ATTEMPT TO RUN WHILE USING LAPTOP, AS THIS MAY LEAD
TO SERIOUS INJURY.
WARNING: CHOKING HAZARD
CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
SMALL PARTS - NOT FOR
T-A (x1)
Wrench
H (x4)
Pads

3
ASSEMBLY STEPS
STEP 2
Insert the previously removed end caps into Crossbars (A), and slide the crossbars into Center Brace
(B).
STEP 3
Reinsert the previously removed thumbscrews back into Center Brace (B).
STEP 1
Remove the preinstalled thumbscrews and endcaps from Center Brace (B). Slide Adjustment Bracket
(C) onto Center Brace (B) and lock it down in place with the knob.
B
C
A
B
B

STEP 4
Loosen the knob on the side of Adjustment Bracket (C). Insert Center Pole (D) into Adjustment Bracket
(C) and retighten the knob.
C
D
4

STEP 5
Assemble VESA Plate (F) to Laptop Tray (E) using M5x14mm Screws (S-A) with M5 Washers (S-B) and
M5 Nuts (S-C). Tighten using Wrench (T-A) and a Phillips screwdriver.
F
E
S-A
S-B
S-C
T-A
5

STEP 6
Slide VESA Plate (F) onto Center Pole (D), and secure using a Phillips screwdriver.
STEP 7
Loosen the thumbscrews on Center Brace (B) and extend Crossbars (A) to t your treadmill. Retighten
the the thumbscrews to secure the assembly in place. Remove adhesive backing from Pads (H) and
place them on Laptop Tray (E). Assemble Security Strap (G) to Laptop Tray (E).
B
A
F
D
HE
G
6

STEP 8
Tightly fasten the mount to the treadmill’s handlebars using the straps on each side of Crossbars (A).
Place your laptop on Laptop Tray (E) and fasten it down using Security Strap (G).
STEP 9
Loosen the adjustment knob on top of Adjustment Bracket (C) to center the tray assembly. Once the
assembly is in the desired location, retighten the knob. Adjust the tray assembly height by loosening
the knob on the back of Adjustment Bracket (C), and retighten the knob to set the desired height.
3
C
E
A
G
7

LAST UPDATED: 05/06/2022
REV1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us.We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected] AVG. RESPONSE TIME (within oce hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oce hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oce hrs): 5M 4S
309-278-5303