Vivo STAND-TV00L User manual

Tabletop TV Stand
Scan the QR code with your mobile device or follow the link
for helpful videos and specications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-tv00l
[email protected]om www.vivo-us.com 1-800-371-5654
SKU: STAND-TV00L

2 3
ASSEMBLY STEPS
STEP 1
Apply foot pads (A1) to bottom of base (B1), tting one pad near each corner.
PACKAGE CONTENTS
TOOLS NEEDED
88lbs
(39.91kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
Phillips
Screwdriver
A1 (x4)
Foot Pad
A2 (x6)
Plastic Washer
A3 (x6)
Metal Washer
M-F (x4)
Metal Washer
M-G (x8)
Small Spacer
B2 (x1)
Post
M-E (x4)
M8x50
M-A (x4)
M5x14
M-B (x4)
M6x14
M-C (x4)
M6x30
M-D (x4)
M8x30
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualied technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specied in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
NOTE: NOT ALL HARDWARE INCLUDED WILL BE USED
B4 (x2)
VESA
Bracket
B3 (x1)
TV Plate
A4 (x2)
M6x25
A5 (x4)
M6x55
A6 (x2)
1/4” Screw
A7 (x4)
M6 Nut
A8 (x1)
Allen Wrench
A9 (x1)
Wrench
B1 (x1)
Base
M-H (x8)
Big Spacer
STEP 2
Assemble post (B2) to base (B1) using M6x25 bolts (A4), metal washers (A3) and plastic washers (A2),
and tighten with the Allen wrench (A8). The plastic washers must be installed between the base and
metal washers.
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF TV OR TV STAND.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
B1
B3
B2
B4x2
A10 (x2)
Cable Clip
A11 (x1)
Square
Spacer
A12 (x1)
Right Side
Cap
A13 (x1)
Le Side
Cap
B1
A1x4
B2
A2x2 A3x2 A4x2 A8

4 5
STEP 3
Slide M6x55 bolts (A5) into slots in TV plate (B3) with two on top and two on the bottom.
STEP 5
STEP 4
Attach right and le side caps (A12, A13) to ends of TV plate (B3) using 1/4“ screws
(A6). Place square spacer (A11) onto installed bolts, making sure the center tab ts
into the center hole, and the thinner side is facing up.
Install TV plate assembly to desired height on post, and secure using M6 nuts (A7), metal washers (A3)
and plastic washers (A2). Tighten with the wrench (A9).
STEP 6
OPTION A: Flat Back TV
Install VESA brackets (B4) to back of TV using bolts
(M-A, M-B) with square washers (M-F).
A5x4
B3
A7x4A2x4
A3x4
A9
A11
A12
A13
A6x2
L1
L2
L1<L2
TV
TV
TV
M- F
M- A
M- B
B4x 2

6 7
STEP 6 (Continued) STEP 8
Manage cables using cable clips. Hook ends of clips together to lock.
OPTION B: Curved Back TV
Install VESA brackets (B4) to back of TV using bolts (M-C, M-D,
M-E) with square washers (M-F) and spacers (M-G, M-H).
STEP 7
Hang VESA brackets with TV onto TV plate and secure by tightening pre-installed screws
underneath with a Phillips screwdriver. Install cable clips (A10) on back of post.
TV
TV
TV
M- F
M- G
M- C
M- D
M- F
M- C
M- D
M- H
M- C
M- D
M- F
M- G
M- H
M- E
M- F
M- H
M- E
M- F
M- H
M- G
M- E
M- F
M- H
M- G
A10x2

Last Updated: 10/18/2018
If any parts are received damaged or defective, please contact us. We are happy to
replace parts to ensure you have a fully functioning product.
For more VIVO products, check out our website at:
www.vivo-us.com.
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected]om www.vivo-us.com 1-800-371-5654