Vivo STAND-V002FG/W User manual

Dual Monitor Desk Stand
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-v002fg
SKU: STAND-V002FG/W
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
TOOLS NEEDED
Phillips
Screwdriver
A (x1)
Pole
B (x1)
Glass Base
C (x1)
Grommet Plate
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
D (x1)
Arm
E (x1)
Pole Cover
F (x2)
VESA Plate
G (x4)
Foot
H (x1)
Grommet So
Pad
I (x1)
Pole Cable Clip
S-B (x4)
M6x10mm
Screw
M-A (x8)
M4x12mm
Thumbscrew
M-B (x8)
M4x30mm
Screw
J (x4)
Arm Cable Clip
M-C (x8)
M4 Spacer
S-C (x4)
M6 Washer
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product for
any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot
be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate
use.
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR
STAND.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
22 lbs
(10 kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
PER ARM
S-D (x2)
Security Nut
T-A (x1)
3mm Allen
Wrench
T-B (x1)
4mm Allen
Wrench
T-C (x1)
5mm Allen
Wrench
S-A (x3)
M6x16mm
Screw
K (x4)
So Pad
L (x1)
Pole Cap

3
ASSEMBLY STEPS
STEP 1
STEP 2
Remove adhesive backing from Grommet So Pad (H) and apply it to the bottom of Grommet Plate (C).
Assemble Grommet Plate (C) to the underside of Pole (A) using M6x16mm Screws (S-A) and 4mm Allen
Wrench (T-B).
Secure Grommet Plate (C) to Glass Base (B) using M6x10mm Screws (S-B) with M6 Washers (S-C) and
4mm Allen Wrench (T-B). Remove adhesive backing from Feet (G) and apply them to the bottom of
Glass Base (B). Remove adhesive backing from So Pads (K) and apply them to Feet (G).
C
B
S-B
S-C
T-B
GK
C
AS-A
T-B
HC

4
STEP 3
Option A: Pole Cover
Slide Pole Cover (E), Pole Cable Clip (I), and Arm (D) onto Pole (A). Secure Arm (D) in place using 5mm
Allen Wrench (T-C). Insert Pole Cap (L) into the top of Pole (A).
Option B: No Pole Cover
Slide Pole Cable Clip (I) and Arm (D) onto Pole (A). Secure Arm (D) in place using 5mm Allen Wrench
(T-C). Insert Pole Cap (L) into the top of Pole (A).
I
D
A
T-C
L
E
I
D
A
L
T-C

5
STEP 4
STEP 5
Attach Arm Cable Clips (J) to Arm (D).
Option A: Flat Back Monitor
Assemble VESA Plates (F) to the back of monitors using M4x12mm Thumbscrews (M-A).
Option B: Curved Back Monitor
Assemble VESA Plates (F) to the back of monitors using M4x30mm Screws (M-B) with M4 Spacers (M-C).
F
M-B
M-C
F
M-A
J
D

6
STEP 6
Slide VESA Plates (F) with monitors onto Arm (D) and secure using Security Nuts (S-D).
Route cables through Pole Cable Clip (I) and Arm Cable Clips (J).
To avoid tipping, do not move arms past the back or front of Glass Base (B).
B
I
J
FD
S-D

7
STEP 7
Adjust the tilt of monitors using 5mm Allen Wrench (T-C). To level the monitors, remove Security Nuts
(S-D) and adjust the leveling screw using 3mm Allen Wrench (T-A). Adjust as desired.
T-C
S-D
T-A

LAST UPDATED: 05/01/2023
REV1.1L
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303