Vocal-Star VS-P120 User manual

VS-P120
VOCAL-STAR
12" PA SPEAKER
300W
CUSTOMER SUPPORT: [email protected]
FURTHER FAQ'S, TROUBLESHOOTING AND INFORMATION AVAILABLE
ON THE PRODUCT LISTING PAGE WWW.VOCAL-STAR.COM

REC
PLAY
REC
1
2
3
4
6
7
5
8
9
11
10
12
14
13
15
16
17
18
1. MIC INPUT
2.
3. ECHO
5.
/SD/
MICROPHONE VOLUME
MODE
6. MAIN SPEAKER VOLUME
8. BASS
9. MIC TREBLE
10. AC INPUT 100-240V/60-60Hz
11. ANTENNA FOR FM RADIO
12. EQUALISER ADJUSTMENTS
13. GUITAR / 2ND MIC INPUT
14. GUITAR / 2ND MIC ADJUST
15. MIC BASS
16. MIC PRIORITY
17. AUX OUT L/R
18. DC 12V INPUT
BACK PANEL QUICK GUIDE
HOW TO USE RECORD
HOW TO USE RECORD (VOICE ONLY)
STEP 1
MAKE SURE THE P120 IS SWITCHED ON AND INSERT A USB
STICK OR TF CARD INTO THE APPROPRIATE SLOT
STEP 2
ENSURE THE MICROPHONE (WIRED OR WIRELESS) IS WORKING BY SPEAKING.
STEP 3
PRESS "REC" TO START, PERFORM TALK / SPEECH, PRESS "REC" TO STOP.
PRESS "REC/PLAY" TO PLAY RECORDING BACK

REMOTE CONTROL IN S TRUCTION S



5


8



I



 
 
 
- I 






 

<2>




SD
300
12V INPUT
BLUETOOTH INSTRUCTIONS
Press the mode button until "Bluetooth" is shown on the P120 display.
Enable Bluetooth on the device you wish to pair and select the P120, which will be
displayed as "Bluetooth Speaker".
The P120 should make an audio sound to confirm Bluetooth connection. Please
note if your device can not find the P120, ensure all other nearby devices have
their Bluetooth switched off.
Tip: You can control the sound of the P120 from your selected device (phone /
tablet etc) once connected to Bluetooth.
Please not that working time will up up to 8 hours used as just a speaker.

4
BATTERY ADVICE
1. THE SPEAKER HAS A BUILT IN RECHARGABLE BATTERY.
PLEASE PLUG IN TO AN ELECTRICAL SOCKET WITH THE
CORRECT INPUT TO CHARGE.
2. WHEN THE P120 IS CHARGING, PLEASE ENSURE THAT THE
PRODUCT IS SWITCHED OFF.
3. PLEASE CHARGE THE P120 FOR 8-10 HOURS FOR THE
FIRST USE. FROM THEN ON, PLEASE CHARGE FOR 6-7
HOURS.
BATTERY INFORMATION
1. IN ORDER TO PRESERVE THE BATTERY LIFE, PLEASE
FULLY CHARGE THE BATTERY UP ONCE IT HAS BEEN
DRAINED DOWN. DO NOT LEAVE THE PRODUCT FOR LONG
PERIODS WITH AN EMPTY CHARGE.
2. IF YOU HAVE ANY ISSUES WITH THIS PRODUCT, CONTACT
OUR CUSTOMER SERVICES TEAM OR SEEK ADVICE FROM A
QUALIFIED ELECTRICIAN.