VoxPrime VOX-SIP BASIC User manual

https://www.voxprime.com 1 / 16
VOX-SIP BASIC
User
Manual
Basic SIP Paging Adapter
User Manual
VOXPRIME
Content
1. Overview ........................................................................... 2
2. Interface Description ......................................................... 3
3. Web Configuration............................................................. 4
3.1 Status.............................................................................................................................5
3.2 Basic...............................................................................................................................6
3.2.1 Date/ Time..........................................................................................................6
3.3 ONVIF ............................................................................................................................7
3.4 SIP Account....................................................................................................................7
3.5 Audio .............................................................................................................................8
3.6 Media File......................................................................................................................9
3.7 Alarm.............................................................................................................................9
3.7.1 DSS Key Setting.................................................................................................10

https://www.voxprime.com 2 / 16
VOX-SIP BASIC
User
Manual
3.8 HTTP URL.....................................................................................................................11
3.9 Schedule......................................................................................................................12
3.10 RTP Multicast IP.........................................................................................................13
3.11 Firewall......................................................................................................................14
3.12 System.......................................................................................................................14
3.12.1 Upgrade..........................................................................................................14
3.12.2 Security...........................................................................................................15
4. IPTool Configuration .........................................................15
1. Overview
SIP-T20 is a IP based paging adapter that can covert analog to SIP. It's small and
portable design with black outlook. The various interfaces (MIC, headset and speaker)
make it possible for quickly configure intercom and paging solution. It’s compatible
with SIP & ONVIF protocol that can be used in VoIP and security field. It supports two-
way intercom communication. Flexible Alarm in and out solutions( GPIO, HTTP URL,
and relay out) are widely applied in daily life. The 48K OPUS Audio Codec enables
excellent sound quality to make announcement, play background music, security
alarm in school, factory and hospital, etc.

https://www.voxprime.com 3 / 16
VOX-SIP BASIC
User
Manual
2. Interface Description
① K1 DSS Key
Connect to:
1. external keys
2. infrared probe and emergency switch
3. door sensor and other switch components
② K2 DSS Key
Connect to:
1. external keys
2. infrared probe and emergency switch
3. door sensor and other switch components
③ Relay NO COM Interface
Control the alarm system on/off

https://www.voxprime.com 4 / 16
VOX-SIP BASIC
User
Manual
④ IO Onput Interface
Responding to:
1.control the external amplifier power switch
2.the short-circuit input interface
3. login device security page settings
4. control the alarm light, electric locks and
other equipment
5. with the adjacent power port connection for
external equipment
⑤Microphone Interface
2.2K Ohm impedance electric condenser
microphone is recommended.
⑥ Headset Interface
Speaker audio line signal output impedance 32
Ohm, single ended output voltage 1.2V, used for
external headphones or amplifier.
⑦ Speaker Interface
Maximum support 15W speaker.
⑧ Ethernet Interface
WAN port, standard RJ45 interface, 10/ 100M
adaptive, support POE input.
⑨ Volume Control Key
This two keys is to adjust the volume of the device’s,
bell, phone call and broadcasting, etc.
⑩ System Reset Key
Press Rest key and hold for 3 seconds, the devices
will restart to factory setting.
⑪ Run Indicator
The light is on shows that the device is working well.
⑫ Power Indicator
The light on shows that the power is connected.
⑬ Power Input Interface
12V ~ 24V 2A input, according to the input voltage
to determine the maximum output power amplifier.
3. Web Configuration
Web configuration includes complete function setting. When the device and your
computer are connected to a same network, please open a browser and type in
http://192.168.5.200, then log in with defaulted username and password as below.
Username: admin
Password: tm1234

https://www.voxprime.com 5 / 16
VOX-SIP BASIC
User
Manual
3.1 Status
You can check out firmware version, free space and two SIP accounts status of
SIPT20, also can locate the current network information here, like MAC, IP address
and gateway etc.

https://www.voxprime.com 6 / 16
VOX-SIP BASIC
User
Manual
3.2 Basic
3.2.1 Date/ Time
There are two update modes for time：NTP/ local time, choose one and set the time
zones, NTP sever and interval can choose default setting, then save the configuration.
3.2.2 Network
When you choose DHCP and save it, IP address will be created automatically by a
DHCP server, then you need to login again with the new IP address on browser:
192.168.5.XXX.
Status IP address: it is a default IP and will not be changed as following.

https://www.voxprime.com 7 / 16
VOX-SIP BASIC
User
Manual
3.3 ONVIF
Select Enable ONVIF, then the device be searched by ONVIF VMS.
Default user name: admin, password:tm1234.
3.4 SIP Account
Each device has two SIP accounts, put SIP extension messages into the blanks and
save the configuration, then you can check if it registers successfully or not on status.
Expire time
Set the expire time of registered account information
Ringing tone
5 system ringtones and 10 users upload media files
Auto Answer
answer immediately and answer delay when a calling incomes

https://www.voxprime.com 8 / 16
VOX-SIP BASIC
User
Manual
3.5 Audio
ACE(acoustic echo canceling): to make a perfect sound quality.
Mic / out volume: adjust mic and output volume at 0-100.
Jitter buffer: to make the audio more stable.
Amp auto off: It’s set defaulted as ON, then there is no noise when not broadcasting.
Code setting: four audio codes to compatible with major audio sources.

https://www.voxprime.com 9 / 16
VOX-SIP BASIC
User
Manual
3.6 Media File
There are five system ringtones, and you can upload 10 media files as customers'
demands: music, announcement, bells, etc.
3.7 Alarm
We can set 2 DSS keys and 2 SIP accounts to realize alarm function, to ready the
combination with alarm system.

https://www.voxprime.com 10 / 16
VOX-SIP BASIC
User
Manual
3.7.1 DSS Key Setting
•Enable the file, you select a action type(start/ stop), play file and cycle mode, save
the configuration, then press buttonK1 & K2, the bell will ring/close.
•SIP enable: choose a SIP account you register, SIP action: call out/hang up, you can
put the SIP number, eg: 8112，make sure it's the extensions which connected to
the same IP sever with SIP account 1&2.
If you select call out, and press K1/K2 button, then extension 8112 will receive a call.
•Enable URL: put the HTTP URL, after pressed K1/K2, the URL will be working.

https://www.voxprime.com 11 / 16
VOX-SIP BASIC
User
Manual
•Output enable: turn on/off the output, press K1/K2，the output succeeds.
•Relay enable: turn on/off the output, press K1/K2，the relay succeed.
3.8 HTTP URL
User can control the alarm by HTTP URL:
(1) Enable the selection;
(2) Open any browser you have in computer;
(3) Put the URL as the following examples, enter it.

https://www.voxprime.com 12 / 16
VOX-SIP BASIC
User
Manual
3.9 Schedule
This function is widely use in school, factory and office projects. Making a regular
bell, announcement and alarm.
Enable the schedule, you can name the schedule. then setting it step by step.

https://www.voxprime.com 13 / 16
VOX-SIP BASIC
User
Manual
3.10 RTP Multicast IP
There are 10 RTP addresses can be received for each device, please note that: port
numbers do not use continuous numbers when setting the same RTP addresses. Use
discontinuous numbers. eg:
239.255.1.2:8000，239.255.0.1:8001，239.255.0.1:8002（×）
239.255.0.1:8000，239.255.0.1:8002，239.255.0.1:8004 (√)
•Multicast address range: 224.0.0.0-239.255.255.
•Ports range: 1024-65536
•Use IP Tool, Audio manager and PA System to make RTP multicast.

https://www.voxprime.com 14 / 16
VOX-SIP BASIC
User
Manual
3.11 Firewall
This function is use to protect your network safety. You can edit the firewall
automatic defence rules as you need as follows.
3.12 System
3.12.1 Upgrade
When reboot and reset the system, system will turn to original setting, and you need
to re-login the web page.

https://www.voxprime.com 15 / 16
VOX-SIP BASIC
User
Manual
How to upgrade SIP-T20 firmware version in web interface?
(1) Select the latest version firmware T20-xxx-bin.
(2) Click upgrade to refresh, it would require about 20s.
(3) Re-login the web interface, latest version has upgraded.
3.12.2 Security
Set a new user name and password as you need, save the configuration and restart
login.
4. IPTool Configuration
Apart from Web configuration, IPTool is the other option that configure quickly basic
information such as SIP account setting, volume setting, RTP Multicast setting,
upgrade. Please follow below steps.
(1) Download IPTool in https://www.tonmind.com/category/downloads/5
(2) Enter IPTool, scan local network, the device will appear and then start setting.

https://www.voxprime.com 16 / 16
VOX-SIP BASIC
User
Manual