VST Zip100 Drive User manual

32
4
1
QuickStart
Insert the Installation CD
into the CD Drive. The
CD-ROM window will open
automatically. Select “Install
IomegaWare” and follow
the on-screen instructions.
Instructions for ThinkPad 600 Series Computers. 570 Users see other side
27-01083-00-00
Congratulations! You are now ready
to use your new VST Zip drive.
Turn off your
computer and
remove the AC
Adapter and cables.
Turn the computer
upside down.
Slide the UltraslimBay
device lock to the
unlock position and
remove any installed
device.
Insert the Zip Drive.
VST Zip100 Drive and Zip250 Drive
IMPORTANT: Customers with older ThinkPad 600 Series Computers (BIOS date prior to 6/23/98) and customers running Windows
NT should refer to the VST Zip Drive User’s Guide before installing the VST Zip Drive.
For further information, see our manual on the enclosed CD

32
4
1
QuickStart
Insert the Installation CD into the
CD drive. The CD-ROM window
will open automatically. Select
“Install IomegaWare” and follow
the on-screen instructions.
Instructions for ThinkPad 570 Series Computers. 600 Users see other side
27-01083-00-00
Congratulations! You are now ready to use your new VST Zip drive.
Turn off your
computer and
detach it from
the UltraBase.
Release the bay lock to the
unlocked position and release the
bay eject lever to the left. Remove
the blank bezel or any device that
is already in the bay.
Remove the bezel from
the VST Zip drive: Turn
the drive upside down
and grasp the bezel
between your thumb
and forefinger as shown.
Push the bezel sharply to
the right and the bezel
will disconnect.
VST Zip100 Drive and Zip250 Drive
IMPORTANT: Customers running Windows NT should refer to the VST Zip Drive User’s Guide before installing the VST Zip Drive.
For further information, see our manual on the enclosed CD
5Insert the
VST Zip
Drive in the
UltraslimBay
until it is
connected
firmly.
6After you attach your
computer to the UltraBase,
you cannot remove the
VST Zip Drive from the
bay of the UltraBase.
If you want to remove
the Zip drive, you must
first detach your computer
from the UltraBase.