Vybra VS001-PAC User manual

Portable Air Cooler Manual
VS001-PAC - EAN: 5060663690265
Before using your unit, please read these instructions and keep them for future reference
Vybra Solutions Ltd, 5 Kingsway, Andover, UK
[email protected].uk [phone]

1. Important Safety Information
WARNING
When using electrical appliances, basic precautions should always be followed to reduce
the risk of re, electrical shock and injury.
1. Only use this appliance for the purposes described in the instruction manual.
2. Only connect this product to main power compliant with the information on
the power plate.
3. Do not cover this product with objects, to avoid overheating or re.
4. Do not plug in before properly installed.
5. Check that the power cord is not damaged.
6. Do not fold or pull the power cord hard.
7. Changing the power cord must be performed by professionals.
8. Do not use this product in bathroom or near a pool.
9. Keep children away from this product while it is working.
10. Unplug when moving this product or power supply breaks.
11. Unplug when cleaning the water tank or any part of the product.
12. Unplug the unit when adding water or ice packs.
13. Empty the water tank before moving the product.
14. Do not use this product for too long in conned spaces.
15. Ensure the inside of this product is dry before re-use.
16. Do not exceed the maximum water level when adding water into tanks.
17. Do not use this product in wet, dusty or extreme heat conditions.
18. Do not use this product near curtains or any material which could be sucked
into the air intake.
19. Do not insert ngers or objects into the product.
20. Do not unplug the plug with wet hands.
21. Never submerge the product, power cord or plug into water.
Important Notice:
The control panel should not get wet under any circumstances.
Disconnect from the power source before cleaning this product.
CORRECT DISPOSAL OF THE PRODUCT
This marking indicates that this product should not be disposed of with
other household waste throughout the UK. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of material resources.

3. Installation Instructions
Please follow these instructions when using this product:
1. Carefully unpack the product and all accessories.
*Keep the package materials out of reach of children.
*Carefully check for any external damage.
2. Place the product on a sturdy, at surface and make sure there is enough
space all around for sufcient ventilation.
*Open the top cover of the product and check if all accessories are there.
*Clean the outside of this product with a slightly damp cloth.
*Install the castors in the 4 holes at the bottom of the product.
3. Fill the ice packs with water and freeze, then close. Note the ice pack never
needs to be replaced.
4. Before connecting the product, please check that:
*The main power source corresponds with the information on the power plate.
*The socket and power cord are suitable for this product.
*The product is placed on a stable and at surface.
Caution:
- The water in the ice packs is not suitable for
consumption and is for use in this product only.
- The cooling elements in the ice packs are not
substitutable for water and are not for other
purposes.
2. Product Diagram

5. Filling the water tank with water
The water tank should be lled with water via the reservoir on the top cap or
straight into the bottom water tank.
Option 1: Straight into the bottom water tank
Step 1: Turn the lock lever of the tank to a horizontal position and pull the water tank
partly out.
Step 2: Fill the water tank with fresh cold water and ensure the water does not exceed
the maximum level - shown both on the front viewing window and the ll line on the rear
of tank. (If you place the ice packs in the tank, also make sure the water level does not
exceed the maximum level)
Step 3: Place the water tank back to its original position and turn the lock lever to
vertical position to lock it.
Option 2: Via the top cap
Step 1: Open the top cap.
Step 2: Place the three ice blocks in the top reservoir then ll with fresh cold water. The
water will ow to the bottom water tank - ensure the water level does not exceed the
maximum level.
6. Emptying the bottom tank
Step 1: Using a cup or similar utensil, remove all of the water.
Step 2: For the last drops of water, use a sponge or towel and dry the inside of the unit.
NOTE: Do not tip-up the unit or pour the water out of the unit.
7. Once the three ice blocks have been placed in the top reservoir, with the water to ll
line, the Cooler is now ready to use, via the control panel or remote.
3. Technical Information
Part no Voltage Power Tank Volume Control Dimensions
VS001-PAC - 5060663690265 220-240V, 50Hz 80W 7 litres Remote 270x305x730

4. Structural Diagram
ON / OFF
AIR FILTERING
CURTAIN
HANDLE
WATER LEVEL
INDICATOR
FRONT FRAME
SWING
SHUTTER
TOP TANK
BACK COVER
BOTTOM TANK
CASTOR
TANK
BAFFLE
5. Control
Panel
6. Electrical
Diagram