
3Shelf WireShelving Rack
VendorStock# C25B-1/C25Z-1
AssemblyInstructions
Questions,Problems, Missing Parts?
Beforereturningtoyourretailer,CALLOURCUSTOMERSERVICEDEPARTMENTat
1-866-375-7994,9a.m.-5p.m. EST. MONDAY-FRIDAYorE-Mail: sales@shelfadditions.com
PACKAGECONTENTS
A-Shelfx3B-TopPolex4C - BottomPolex4D -PlasticTapered Lock x24 +extra2
E-PoleCapx4F PoleConnectorx4G Screw PoleInsert x4H FeetLevelerx4
Pre-installedonPole(B)Pre-installedonPole(B) Pre-installedon Pole(C) Pre-installedon Pole(C)
Notoolsrequiredforassembly. Helpful - Rubber Mallet
Note: Black plasticdiscsbetweenshelf collarsareforpackagingpurposesonly.TheyareNOTNEEDED. Discarduponassembly.
SPECIALWARNINGS
Assembletheitem on asoft, non-abrasive surface,such ascarpeting, toavoidscratchingthefinish.
Use carewhen handling.May requiretwoadultsfor safeassembly.
CARE ANDMAINTENANCE
Periodicallycheckand makesurethat all componentsareintheirproper position,arefreefrom damage andthatall connectorsaretight.
ASSEMBLYINSTRUCTIONS EstimatedAssemblyTime:Approximately15 minutes
1.PostAssembly
Screwthetwopost sections(B)&(C) together. Handstighten.
Note: thetopsectionhaspoleconnector &cap.Thebottom sectionhas insert &feet leveler.
2. BottomShelf Assembly
a.Locatethedesiredpositionofthebottom shelf. Note: Bottom shelf shouldbe no morethansixinchesfromthefloor.
b.Insert twoplastictaperedlocks(D) intheappropriatepolegroove,oneset ineachpole.Ensuretaperedend isup(seearrow onlock).
c. Placeshelf (A) onitssideandslideeachpolewithtaperedlocks throughthe bottomoftheshelfuntil snug.
d.Afterall polesareinplace,positiontheunit intheuprightposition.
e.Pushdownon each cornerof theshelf,ensuringtheshelf isinafullylockedposition.
3. AdditionalShelf Assembly
a.Locatethedesiredpositionofthenextlowestshelf (A) andinsertthetaperedlocks (D)intothepoles.
b.Slidetheshelf downfrom thetop of thepoles andontothe taperedlocks. Pushdownoneachshelfcorner, ensuring theshelfisinafully
lockedposition.