WatchDog Home Monitor User manual

Check the status of your home from anywhere at
watchdogprotect.com
Online access is included with your device. Create a free
account on our website to check temperature, humidity, and
water presence any time 24/7. You can also manage when and
how you are alerted to any detected problems.
Access your device online
Setup complete!
When setup is complete, the light
will turn off. The device will now be
monitoring your home for water,
temperature, and humidity
problems.
Follow the steps in the
setup portal.
5
If the setup portal does not open after one minute,
you can access it with your web browser:
- Stay connected to the 'Watchdog Setup WiFi'
- Open your web browser
- Go to http://192.168.3.3
Within 30 sec of connecting to the
Setup WiFi network, the setup
portal should pop-up automatically
on your phone, tablet, or laptop.
Setup portal will open
automatically.
4
Use your phone, laptop, or tablet
to connect to the WiFi network
named 'Watchdog Setup WiFi'.
Device light turns purple to
indicate you have connected to
the device's Setup WiFi network.
Connect to Setup WiFi.
3
This will make the device
broadcast a WiFi network named
'Watchdog Setup WiFi'.
Device light turns blue to indicate
the device's Setup WiFi network
has been turned on.
Hold the button until it
turns blue. (~3 seconds)
2
Use the included USB wall
adapter. Place the water sensor
near spots at risk for water leaks
or ooding.
Device quickly ashes a green
light to indicate it has turned on.
Plug in device.
1
Follow these 5 steps...

This guide will connect your Watchdog to the internet, enabling it
to send text message and email alerts, and allowing you to
monitor your device online.
for choosing Watchdog to help monitor your home for problems.
Thank you
BACK
Temperature
& Humidity
Sensors
Alarm
Speaker
USB
Button
Body
Magnet
Water Sensor
20220703
Important Information. Read before use.
WARNING! Electrical Shock Hazard: Never go near a live electrical
outlet when any part of you is wet or touching water. When using
electrical appliances, basic safety precautions should always be
followed to reduce the risk of re, electric shock, and/or injury to
persons.
The device Body (see product diagram) should never get wet as this
may cause device failure and/or risk of electric shock. The Water
Sensor and its adjoining cable are the only components that may be
exposed to or submerged in water.
Device runs on 5V DC. The USB wall adapter plugs in to a typical
120V AC outlet. 120V AC can cause serious injury or death. Use
extreme caution when dealing with high voltage.
For full functionality, this device requires a Wi-Fi network (2.4 GHz)
with internet. Most home routers have a 2.4 GHz network.
Indoor use only. Full length is ~5ft.
Message and data charges may apply from your carrier when
receiving text message alerts.
Disclaimer of Liability: To the extent permitted by law,
neither Watchdog Devices, LLC nor any of its employees, related
partners or their respective ofcers or employees will be liable in any
way for any loss, damage, cost or expense suffered or incurred by you
or claims made by you because of your use of Watchdog products and
websites, unavailability of the Watchdog website or in connection with
any services or information advertised, offered or supplied through the
Watchdog website.
Users should always maintain backup systems to monitor for
home environment problems in case one or more systems fail.
Watchdog Home Monitor
Quick Start Guide