Wave Sport CORE WHITEOUT OUTFITTING Guide

TABLE OF CONTENTS
2 Storage and Carrying Overview
3 System Adjustments Overview
4 Play Seat Adjustment
5 Creek Seat Adjustment
6 Foot Brace Adjustment
7 Foot Brace Outtting
8 Freestyle Foot Brace; Thigh Brace Adjustment
9 Hip Pad Adjustment
10 Ethos Hip Pad Adjustment
11 Seat Shim Adjustment; Leg Lifter Adjustment
12 Back Band Adjustment; Thigh Brace Wing Removal
READ OWNER’S INFORMATION PACKAGE PRIOR
TO USING PRODUCT.
The user of this product acknowledges both an
understanding and an assumption of the risk
involved in paddlesports.
4mm Hex Allen Wrench
Standard Phillips Head Screwdriver
TOOLS REQUIRED

2
HULL BEAM STORAGE WELL
GEAR LOOPS 4
GEAR LOOP
WATER BOTTLE
RESCUE THROW BAG
STORAGE OVERVIEW
1. Your Wave Sport CORE WhiteOut seat system
has multiple gear attachment and storage
points located across the system.
2. A strap and buckle gear system is located at
the bow position of the hull beam. Secure
your gear in the storage well and buckle the
straps together. Adjust the straps to desired t.
Additional tension can be created in the bow
storage system by adjusting the cord lock and
bungee at the hull beam tray.
3. Multiple gear loop attachment points with quick
clip access can be found throughout the system.
4. Disconnect both upper backband connectors
for greater access to stern storage.
5. Space under the leg lifter can be utilised for
additional storage.
CARRYING OVERVIEW
1. Use the built-in hand grip to carry your
Wave Sport Creek Boat.
2. Flip out the hip pad to protect your shoulder
when carrying the Ethos Kayak.
PRO TIP - Use the bow storage straps for water
bottles, rescue throw bags, sponges, or small
dry bags.

3
SYSTEM ADJUSTMENT OVERVIEW
• SEAT ADJUSTMENT
Allows for comfortable seat positioning (creek
or play style seats).
• FOOT BRACE ADJUSTMENT KNOBS WITH
TETHER (L/R)
Allows for comfortable, positive foot position
adjustment (see p. 8 for freestyle foot brace).
• THIGH BRACE (L/R)
Adjusts for comfort against the thighs for
increased boat control.
• HIP PADS (L/R)
Adjust for comfort to prevent excess
movement.
• LEG LIFT ADJUSTER
Adjusts leg lifter beneath the thighs for
comfortable leg positioning.
• BACKBAND
Adjustable for comfort and support.
• BACKBAND STRAPS
Adjustable for ne tuning backband comfort.
• BACKBAND ADJUSTER (L/R)
Adjusts backband for comfort and support
against the lower back.
PRO TIP - The adjustments are listed in the
recommended order to ensure proper t.
THIGH BRACE HIP PAD BACKBAND
UPPER BACKBAND
STRAPS
SEAT ADJUSTMENT
PLAY SYSTEM
HIP PAD
LEG LIFT
ADJUSTER
FOOT BRACE
ADJUSTMENT KNOB SEAT PAD
BACKBAND
ADJUSTER
LOWER BACKBAND
STRAP
SEAT ADJUSTMENT
CREEK SYSTEM

4
PLAY SEAT ADJUSTMENT
1. Unfasten the upper backband bungee cords.
2. Loosen the seat adjustment knob by turning
ve to six times but DO NOT remove it.
3. With both hands positioned as shown, press
straight downward on the rear adjustment
knob and slide the seat assembly fore or aft to
the desired location.
4. Tighten the adjustment knob securely.
5. Fasten the lower backband strap and the
upper backband bungee cords.
SEAT ADJUSTMENT KNOB
UPPER BACKBAND
BUNGEE CORDS
LOWER BACKBAND
STRAP
FRONT OF SEAT ASSEMBLY
PRO TIP - Always test your adjustments on
calm water!

5
CREEK SEAT ADJUSTMENT
1. Loosen, but DO NOT remove, ve seat
adjustment screws.
2. With both hands, slide the seat assembly fore
or aft to the desired location.
3. Tighten ve adjustment screws securely.
SEAT ADJUSTMENT
SCREWS
SEAT ADJUSTMENT
SCREWS
SEAT ADJUSTMENT
SCREW
STEP OUT WALL
PRO TIP
• Once loosened, the seat adjustment screws
may require a good smack from the top to
loosen the assembly.
• Safety step outs save lives! In the result of a
pin, use the step out wall to assist in exiting
the kayak.
• The step out wall has an integrated gripping
handle and thumb locator for comfort and
control when shouldering your kayak.

6
FOOT BRACE ADJUSTMENT
TO ADJUST BULKHEAD AND FOOT CUPS
1. Remove both adjustment knobs.
2. Remove both rails from the positioning studs
and re-position to the desired location based
upon your comfort. Note: Make sure you have
outtted the foot braces with the desired level
of foam padding and are wearing preferred
paddling gear to attain proper nal positioning.
3. Loosen all four foot cup adjustment screws with
a 4mm Allen Key.
4. Adjust each foot cup so that its top is ush
against the underside of the deck. IMPORTANT:
Do not leave any space between the top of the
foot cup and the underside of the deck where
your feet can become entrapped.
5. Tighten all four foot cup adjustment screws
securely.
6. Fasten both adjustment knobs securely.
ADJUSTMENT
KNOB
FOOT CUP FOOT CUP
ADJUSTMENT
SCREWS
ADJUSTMENT
KNOB
ADJUSTMENT
SCREWS
Rail
POSITIONING
STUD
PRO TIP - Safety rst! Always adjust your
spring-loaded plates to eliminate gaps and
be sure to LOCK THEM IN PLACE by tightening
securely.

7
FOOT BRACE OUTFITTING
1. Position the foam wedge over the Velcro®pad
on the foot brace. Note: Make sure the thick
end of the wedge is positioned toward the
hull surface of the boat.
2. Using the template (visit WaveSport.com to
download) and a cutting tool, trim the foam
pad to t over the foam wedge.
3. Make sure the foam pads t properly then
reveal the adhesive strips and press into place.
FOAM PAD
FOAM WEDGE
VELCRO®VELCRO®
PRO TIPS
• Test t all foam components with proper
paddling shoes and gear prior to nal placement!
• Use as much foam padding as possible to
ensure comfort and protection for the feet and
ankles during an impact.

8
THIGH BRACE ADJUSTMENT
1. Climb into the cockpit and get comfortable.
2. Using a 4mm Allen Key, remove the thigh
brace adjustment screw for each thigh brace.
3. Loosen, but DO NOT remove, the thigh brace
set screws for each thigh brace.
4. Position both thigh braces comfortably
against your thighs sliding fore or aft.
5. Install and securely tighten all screws.
THIGH BRACE
ADJUSTMENT SCREW
THIGH BRACE SET SCREW
FREESTYLE FOOT BRACE
1. Add/remove foam shims to achieve desired
comfort.
2. Place in boat and check for comfort and t.
PRO TIP - Use a foam rasp or course sandpaper
to shape the foam to customise your foot
position.
THIGH BRACE SET SCREW

9
HIP PAD ADJUSTMENT
1. Disconnect hip pad strap from buckle.
2. Swing hip pad upward.
3. Insert foam padding into the pocket on the
back of the hip pad.
4. After you have inserted as much foam
padding as desired, reseal and lower hip pad,
Velcro®in desired position.
5. Thread the hip pad strap through the seat
tower, as shown, connect to the buckle and
tighten the strap.
6. Stow the strap by wrapping it back behind the
buckle and fastening to the Velcro®tab.
7. Adjust the Velcro®strap on hip pad to set
desired height of hip pad on seat.
PRO TIP - Use the wedge shaped shims with
the thick end at top to create a “hook” over the
hip and thigh area. Avoid direct pressure of
the hip pads to the hip joint to prevent fatigue
or discomfort.
HIP PAD
BUCKLE HIP PAD
STRAP
FOAM
SHIM
SEAT
TOWER
HIP PAD STRAP
BUCKLE
43
1 2

10
ETHOS HIP
PAD
STRAP
HOOKS
STRAP
HOOKS
ETHOS HIP PAD ADJUSTMENT
1. Disconnect the hip pad straps from the
buckles.
2. Remove hip pad.
3. When installing hip pad, make sure to place
the upper strap beneath the upper strap
hooks and the lower strap beneath the lower
strap hooks so the hip pad stays in place.
PRO TIP - ETHOS hip pads are designed to make
the cockpit more roomy and comfortable for
carrying. Ethos hip pads can be replaced with
traditional Wave Sport hip pads for a tighter t.
Contact your dealer for more details.

11
SEAT SHIM ADJUSTMENT
1. Disconnect the retaining bands beneath the
front corners of the seat pad.
2. Slip the seat foam shim beneath the seat pad.
Reveal the adhesive strips to keep it in place.
3. Re-connect the retaining bands beneath the
front corners of the seat pad.
LEG LIFTER ADJUSTMENT
1. Climb into the cockpit and get comfortable.
2. Ratchet the leg lifter adjustment until the leg
lifter is at desired height.
3. To loosen the adjuster, squeeze the release
lever, as shown.
SEAT SHIM
PRO TIP - Use the seat booster shim on waves
to gain leverage over the boats carving rails.
Use it in holes to provide more reach and
improve rotation in overcoming the boats
deck volume.

BACKBAND ADJUSTMENT
PRIMARY BACKBAND ADJUSTMENT
1. Disconnect both upper backband bungee
cords.
2. Pull the lower backband strap until backband
is positioned at the small of the back.
3. Fasten both upper backband bungee cords.
SECONDARY FINE TUNE ADJUSTMENT
1. Ratchet both backband adjusters until
backband is at desired rmness.
2. To loosen the adjuster, squeeze the release
lever, as shown.
THIGH BRACE WING REMOVAL
1. Remove the set and adjustment screws and
each thigh brace from the kayak.
2. Remove the fabric cover from each thigh brace.
3. Remove two screws and the outer wing from
each thigh brace plate.
4. Re-install each thigh brace.
UPPER BACKBAND
BUNGEE CORDS
BACKBAND
BACKBAND ADJUSTER
LOWER
BACKBAND
STRAP
PRO TIP - The thigh brace outer wing provides
improved support and control. Remove it
from each thigh brace only when your thighs
need additional room.
OUTER WINGTHIGH BRACE
© 2016 Wave Sport
Wave Sport Kayaks Bellbrook Industrial Estate, Uckfield
E.Sussex, TN22 1QQ, UK. www.WaveSport.com