Specications:
Attention: Features:
User Guide:
• Do not disassemble the lamp as this may cause an electric
shock
• Use the vendor’s specified adapter and power socket so as
to maintain a standard working condition
• Do not over adjust the joint activity parts so as to avoid any
damage to the lamp
• Do not use this lamp in a high temperature or high humidity
environment
• Do not look at the LED light source directly as this may
damage your eyes
• In case any of the below conditions occur, remove the
power cord and stop using the lamp - if needed please call
for help:
• If the power cord or power electrical plug breaks
• If the lamp base becomes damp or is rain affected
• The joint in the lamp holder breaks
• The lamp holder smokes or sparks
• If there is abnormal flickering or a break in the
transmission of the LED light bulb
• High polish treatment finish
• Easy touch switch on/switch off
with 3 steps of dimming
• USB port connection for powering
USB devices
• Long lifetime LED bulb, more than
40,000 hours
• Stylish and easily foldable design
1. Connect the adapter in the rear
of the lamp holder
2. USB output, used for recharging
mobile phones or any type of
mobile device with a USB input
(related voltage 5.0V, maximum
current: 1A, maximum
power: 2.5W)
3. Touch the on button switch
and select from 3 dimmer
settings
4. The lamp head can be adjusted to
up to 120 degrees up or down. The
lamp arm can be adjusted up to 90
degrees left or right - hold the base
when adjusting the lamp.
210mm
Size(Dveloped dimension): 285mmx210mm(L*W)
Die-cut line
Black
142.5mm
285mm
Size(Paper molding): 142.5mmx210mm (L*W)
210mm
Size(Dveloped dimension): 285mmx210mm(L*W)
Die-cut line
Black
142.5mm
285mm
Size(Paper molding): 142.5mmx210mm (L*W)
Attention:
Do not Self-disassemble the product, to avoid any electric
shock.
Please use vender’s specified adapter and power socket,
to maintain normal working.
Please do not over-adjusting the joint activity parts, to avoid
any damage to the lamp.
Please do not use the lamp in high-temperature or
high-humidity environment.
Please do not look at the LED light source straightly, to avoid
your eyes hurt.
In case below conditions occur, please pull out the power
cord, stop using (if needed, please call for help):
The power cord or power plug break
The lamp holder damp or rain
The joint activities of the lamp holder breaks
The lamp holder smokes or sparks
The abnormal flickering or break of the LED light bulb
Specifications:
Power:Voltage:CRI:Switch: Colour:
7W DC 12V>80 Touch Control White, Black,
Silver
Material:Luminous Flux ( Lm):
Qty of LED: Illumination (lux):CCT:
ABS, Aluminum 280-30012pcs H30cm=800-900 2800-6000K
User guider:
1. Connect the adaptor in the rear
of the lamp holder.
2. USB output, used for recharging
Mobile phone. (Rated Voltage:
5.0V, maximum current: 500mA,
maximum power: 2.5W)
3. Touch the switch, 3 steps dimming,
you can enjoy the new lamp.
4. Lamp head can be adjusted 120
degrees up/down, lamp arm can
be adjusted 90 degrees left/right.
(When adjusting the lamp, please
hold the base)