Westinghouse component (YPbPr) connection User manual

ADAPTER KIT PARTS
(INCLUDED)
CONNECTING
VIEWING
Purpose: If you have a source that requires Component connection (YPbPr) to your TV (e.g., DVD Player) then you will
need to use a VGA-Component Cable adapter kit. The following are step-by-step instructions to guide you through the set
up process. (Note: We recommend the use of Composite (Video/RCA) connection instead of component from most
analog sources; your Westinghouse TV employs superior video processing and will provide optimal video quality. Always
use HDMI when available.)
• 1 VGA-Component Cable
• 1 Mini-RCA Cable
For assistance call: 1-800-701-0680
STEP 1: Connect VGA-Component cable and Mini-RCA
audio cable to VGA port and PC audio port as shown
above.
EXAMPLE: DVD player connected via Component
(YPbPr).
STEP 2: After you complete connecting your device via
VGA-Component as shown is Step 1, Press the “Input”
button on the remote control to visibly see all your
input selections on the TV screen as shown.
STEP 3: Using the remote control, toggle and select
VGA-Component input. (Note, you are ready to begin
viewing content through the VGA-Component input.
The VGA input for PC is disabled and can be restored
using the input select function again.)
Mini RCA CableVGA-Component Cable
© 2013 Westinghouse Digital , LLC. All rights reserved. Specifications subject to change without notice. ¼and Westinghouse are trademarks of Westinghouse Electric Corporation.
MA-PS-0101-0102
COMPONENT (YPbPr) CONNECTION
Disconnect all power sources before making any connections
Débranchez toutes les sources d'énergie avant d'établir tous les rapports
Desconecte todas las fuentes de energía antes de hacer cualesquiera conexiones
Refer to User Manual for complete installtion instructions
Référez-vous au manuel d'utilisateur pour des instructions complètes d'installtion
Refiera al manual de usuario para las instrucciones completas del installtion
VGA-COMPONENT