LET’S GET STARTED
We’ll get you o and running in no time. It’s best to set up your device at home
since you’ll need a Wi-Fi connection.
STEP 1 - CHARGE DEVICE
Plug charger cable into Micro-USB port. Plug the other end into a USB power
outlet (5V recommended). When the LED lights up, device is ready for setup.
Charging can take up to 2 hours.
STEP 2 - DOWNLOAD & SET UP APP
Keep device plugged in during setup. Download Whistle app. The on-screen
instructions will walk you through activating your device. When prompted, pick
a subscription plan.
WHAT IS A SUBSCRIPTION PLAN AND WHY DO I NEED ONE?
The subscription plan covers our connection to the AT&T cellular network to
track and monitor your pet.
Hook-And-Loop
Attachment
Hook-And-Loop
Attachment
UNBOX YOUR GOODIES
Charger
Cable
Charger
Cable
Snap
Attachment
Snap
Attachment
WhistleTM
GO Explore
WhistleTM
GO Explore
STEP 3 - ATTACH & GO
ATTACHING COLLAR ATTACHMENT
SNAP ATTACHMENT Place collar into part B recess, line up A and B, then
snap together.
HOOKANDLOOP ATTACHMENT Wrap strap around collar, and insert strap
through top loop. Wrap strap around loop, pull tight, then press soft and
scratchy sides together to secure.
WHICH ATTACHMENT SHOULD I USE?
Snap attachment is designed for thinner, flat collars that are less than 1” wide
and is the more permanent option. Hook-and-loop is designed for thicker and
wider flat collars, or rope collars and is adjustable.
ATTACHING & DETACHING DEVICE
To avoid damage to device, carefully follow directions.
TO ATTACH Insert device into collar attachment, then turn CLOCKWISE until
it snaps into place.
TO DETACH Press release button on the collar attachment, then turn the
device COUNTERCLOCKWISE. Lift to remove.
LIGHT GUIDE
Orange Charging
Blue Syncing
Green Charged
!
A
B
Press and
hold release
button.
