Whistler 1750 User manual

OWNER’S MANUAL
1750/1760/1765
LASER/RADAR DETECTOR
THE WHISTLER GROUP
CORPORATE HEADQUARTERS
13016 N. Walton Blvd.
Bentonville, AR 72712
TEL [phone] FX [phone]
PRODUCT DEVELOPMENT CENTER
25 Industrial Ave.
Chelmsford, MA 01824
TEL [phone] FX [phone]
CUSTOMER RETURN CENTER
1201 N. Dixieland Rd.
Rogers, AR 72756
Consumer Relations Tel [phone]
P/N 1750/1760/1765MAN, © WHISTLER 2002
1750/1760/1765 manual 3/6/02 2:20 PM Page 1

If you have questions concerning the
operation of this Whistler product
please call consumer relations:
1-800-531-0004
Hours:
Monday - Friday
8:00 am - 5:00 pm CT
Please keep the receipt in a safe
place. If the unit is returned without a
dated store receipt an out of warran-
ty service charge applies. Note: Your
warranty period begins at the time of
purchase. The warranty is validated
only by a copy of the original store
receipt.
Now is the time to record the serial
number of the unit in the space pro-
vided in the warranty section of the
manual.
INTRODUCTION
Dear Whistler Owner,
For many of us, a vehicle is more than just transportation. It can be a
mobile office, communications or entertainment center, or simply an
expression of our personality. Whistler products are designed to
make the time you spend in your vehicle more productive, more ful-
filling, safer, or just simply more fun. Our mission is to provide prod-
ucts that improve your driving experience.
Our new units offer not only bold new styling but also many features
not found on other detectors at any price. We start with a proven
detection circuitry with All Band™ and added top-of-the-line fea-
tures such as:
•Whistler’s exclusive Safe Driving System -
Incorporates the Safety Warning System (SWS), keeping you
informed of road hazards as well as our unique Stay Alert system,
it tests your alertness on long solo trips.
• Vehicle Battery Saver - battery saver turns the detector off if you
forget.
•High Visibility Display - a digital display with safety messages to
you informed while you drive.
• Real Voice™ - (1750 only) allows you to keep your eyes on the
road.
• Digital Compass - (1760, 1765 only) provides cardinal points and
direction in 5 degree increments.
Even though these units are packed full of features, they’re still very
easy to use. To fully utilize your unit to its potential, we recommend
reading this entire manual or visit our FAQ page on our web site
www.whistlergroup.com.
Note: On 1760 and 1765 models the compass must be calibrated
before use! See Compass Calibration set-up section.
Enjoy your new Whistler and please drive safely.
Sincerely,
THE WHISTLER GROUP
1750/1760/1765 manual 3/6/02 2:20 PM Page 3

WHISTLER FEATURES
3
Topic Page
Model Features Summary....................................................3 - 5
Installation.............................................................................6 - 9
• Mounting Guidelines
• Dash/Visor/Windshield Mounting
• Power Connection And Fuse Replacement
• Compass Calibration Set-up
Operation..........................................................................10 - 18
• Power On And Self-Test
• Feature Engaged Confirmation
• Compass Mode (1760, 1765 only)
• Integrated Real Voice™ (1750 only)
• Auto Quiet/Quiet Modes
• City Mode
• Dim/Dark Mode
• Engaging/Disengaging VG-2 Detection
• Stay Alert
• Option Select Mode
•Teach/Tutorial Mode
• Vehicle Battery Saver Mode
Radar, Laser And VG-2 Alerts..........................................19 - 23
• Radar Alerts
• Pulse Protection®
• Safety Radar Audio/Visual Alerts
• Laser Audio/Visual Alerts
• VG-2 Audio/Visual Alerts
• Alert Priority
• Reset Features
• Care and Maintenance
Troubleshooting Guide............................................................24
Are Detectors Legal?...............................................................25
Speed Monitoring Technologies.....................................26 - 27
• Radar Facts
• Laser Facts
• Other Speed Detection Systems
• Radar Detector Detectors
Warranty Information........................................................28 - 30
Specifications............................................................................31
Accessories...............................................................................32
TABLE OF CONTENTS
Whistler 1750/1760
1
2
4
56
8
9
1
2
3
3
4
567
7
8
Whistler 1765
9
1750/1760/1765 manual 3/6/02 2:20 PM Page 5

WHISTLER FEATURES
10. Laser Antenna (Front) - High gain optical lens
provides increased sensitivity and field of view for leading-
edge laser detection.
11. Radar Antenna - Compact, high-efficiency antenna
receives radar signals.
12. Mounting Bracket Location - Slot holds mounting
bracket firmly.
Accessories
Accessories included are highly functional and easy to use.
Power Cord - Connects to the unit’s power jack and your
vehicle’s lighter socket.
Windshield Bracket - Allows installation of unit on your
vehicle’s windshield.
Hook & Loop Fasteners - Designed to secure the unit on
a level dashboard.
5
WHISTLER FEATURES
Whistler’s ergonomic and user-friendly design provides a
new level of operating convenience. Special features
include:
1. Bracket Release Button – Provides quick and easy
release of the mounting bracket.
2. Power Jack – Provides connection for the power cord.
3. Speaker – Provides distinct audio warnings for X, K, Ka
band radar, safety radar, laser and VG-2.
4. Power/Dim/Dark/Button – Turns unit on/off and
engages Dim/Dark modes (press and hold for 2 seconds).
5. Volume Up/Down Buttons – Adjust volume up or
down. Pressing both buttons enters compass calibration
mode. (Models 1760/1765 only)
6. High Visibility Display – Provides distinct visual confir-
mation of signals detected, signal strength, and indicates
engaged modes of operation.
7. Quiet/Menu Button - Pressing QUIET before a signal is
detected engages Auto Quiet Mode which automatically
reduces the audio level after the initial warning to a low
audio level setting. Pressing QUIET during a radar/laser
encountersilences audioalerts, whileallowing visualalertsto
keepyou informed.
8. CITY/CITY 1/CITY 2 Button - Reduces the annoyance
of false alerts typically encountered in urban driving areas.
9. Laser Antenna (Rear) - An integrated optical wave-
guide provides superior detection of laser signals trans-
mitted from behind. 4
1750/1760/1765 manual 3/6/02 2:20 PM Page 7

INSTALLATION
shield bracket. Press the bracket release button and remove
the detectorbefore bending.
Dash Mounting
•Make sure the mounting location you have chosen is
relatively level and is clean and dry. Clean with isopropyl
alcohol if necessary to remove any waxes or polishes.
•Separate the fastener strips. Peel the paper backing off
each strip and adhere one piece to the dash and the other
piece to the bottom of the unit, taking care not to cover
the serial number.
Be careful not to place the fastener strip over the unit’s serial number. If the
fastener strip is removed, the serial number may be pulled offthe unit. Units
without serial numbers are not covered under warranty.
7
INSTALLATION
Mounting Guidelines
•Mount the unit as lowand levelas possible near the center
ofthe windshield. Unit mustbe level for compass to function
properly. (Models 1760/1765 only)
•Do not mount your unit behind wipers, ornaments,
mirrored sunscreens, etc. These obstructions have metal
surfaces which can affect radar and laser signals and reduce
critical warning time. (Regular tinted glass does not affect
reception.)
•Some windshields have an Instaclear™orElectriclear™type
coating,whichaffect radarsignals.Consultyourdealer orthe
owner’s manual supplied with your vehicle to determine if
your windshield has this coating.
•Avoid placing unit in direct contact with windshield.
•To reduce the possibility of theft, conceal your unit when
not in use.
Windshield Mounting
•Install the two suction cups and rubber bumper onto the
bracket by fitting them into their holes.
•Press the suction cups onto the windshield atthe location
you have chosen. IMPORTANT: Some newer cars have a
plastic safety coating on the insideof the windshield. The
suction cups may leave permanent marks on this type of
surface. To find out if your vehicle has this type of
windshield, check the owner’s manual or ask your dealer.
We recommend that you do not leave the suction cup
bracket on the window in direct sunlight. If the detector
is removed, this may cause blistering ofthe dash in some
vehicles.
•Slidethedetectoronto thebracketuntilitlocksintoplace.
• If necessary, the unit may be leveled by bendingthe wind-
6
1750/1760/1765 manual 3/6/02 2:20 PM Page 9

INSTALLATION
Compass Calibration Set-up (1760, 1765 only)
The unit will need to be calibrated in order for the com-
pass to provide accurate readings. To calibrate the unit,
perform the following procedure:
1. Mount the unit level in the center of the vehicle’s wind-
shield in which it will be used. Make sure there are no
other magnetic sources near the detector (i.e., speaker).
2. Select a large clear area (parking lot or field) without any
power lines.
3. While parked, press both volume buttons simultaneous-
ly until unit displays:
4. Drive vehicle slowly in at least two complete circles. If
calibration does not automatically finish press both volume
buttons simultaneously to complete calibration. The unit
will beep twice and display, for example:
Note: If unit mounting is relocated in the vehicle, (i.e.,
visor to windshield mounting or dash mounting), or if the
unit is moved to another vehicle, you must recalibrate the
compass. 9
INSTALLATION
Visor Mounting (optional accessory)
• Slide the visor bracket into the bracket mounting slot.
• Clip the visor bracket onto the visor making sure it is
relatively level and hasa clear view of the road.
Power Connection
• Plug the small end of thepower cord into the unit’s power
jack.
• Plug the large end into the vehicle’s cigarette lighter.
Fuse Replacement
The lighter socket plug is equipped with a replaceable 2
amp 3AG fuse located behind the silver tip. To replace the
fuse, carefully unscrew the tip of the plug. (IMPORTANT:
Unscrew slowly. The tip contains a spring which may fly out
when disassembling.) Insert thenewfuse with the spring and
screw on the tip. With use, screw cap on plug may loosen.
Retighten occasionally.
Unscrew the tip of the lighter socket plug carefully when replacing the 2amp
fuse. 8
Insert into bracket mounting slot. Do not bend this
section of bracket.
Slide on view
1750/1760/1765 manual 3/6/02 2:20 PM Page 11

OPERATION
11
OPERATION
Power On And Self-Test
Each time your Whistler detector is turned on, an auto-
matic self-test sequence confirms that the speaker and
visual displays are functional.
• Press Power or apply Power. Display reads:
Self-Test Display for 1750 Model
Memory/Beep Confirmation
All features selected (except Stay Alert and Quiet) are
retained in memory. Each time a button is pressed one
beep confirms feature“on”, two beeps confirm feature
“off”.
Audio Level Adjustment
The audio levels can be adjusted high to low, or low to
high, in eight steps: (0) is no audio level, (7) the highest,-(8)
for 1750
•Press Volume up to increase audio level.
•Press Volume down to decrease audio level.
As audio level is adjusted, beeps are provided and the
display indicates volume level. 1760, 1765 example shown:
Integrated Real Voice (1750 only)
When selected, Real Voice will be used to articulate the
following:
1.Band Identification
2.Safety Warning System messages
NOTE: In certain cases the voice message does not repli-
cate the text message.
3.Feature Selection
Compass Mode
The 1760/1765 is programmed from the factory in “Combo
Mode”. Combo mode means that the unit provides both
compass readings as well as detecting laser/radar signals.
Through the “Option Select Mode”, either laser/radar or
compass features can be turned off meaning, Radar equals
detection of all police bands and laser; Compass equals
no detection of police laser/radar.
Note: The unit must be calibrated to provide accurate
compass readings. See Compass Calibration Set-up sec-
tion on page 9.
10
1750/1760/1765 manual 3/6/02 2:20 PM Page 13

OPERATION
13
OPERATION
12
City/City 1/City 2 Mode
Whistler’s Three Stage City Mode is designed to reduce the
annoyance of automatic dooropeners, intrusion alarms and
other devices which share frequencies with police radar.
•Press City to engage City. Display reads:
•Pressing City asecond timeengagesCity 1. Display reads:
•Pressing City a third time engages City 2. Display reads:
•Pressing City a fourth time cancels City, City 1, and City 2.
Display reads:
In City Mode, weak speed/safety radar signals give an initial
alarm of two beeps, and then remain quiet unless the signal
becomes very strong. When the signal strength increases,
two additional beeps areprovided. In City 1 Mode, only the
X band sensitivity is lowered. In City 2 Mode, X-band is not
detected. CAUTION: When selecting this mode, some
towns/small cities may still be using X band radar.
If Auto Quiet is engaged in City 1 or City 2 modes and the
unitreceivesastrongradarsignal,theunitperformstheAuto
Quiet feature. City Modes do not change the audio alert for
laser or VG-2.
Auto Quiet Mode
Auto Quiet reduces the selected audio level to level (1)
approximately 5 seconds after a radar or safety radar sig-
nal is detected. The alert for any new signal within 20 sec-
onds will resume at level (1). Auto Quiet does not affect
VG-2 or laser alerts.
•Press Quiet/Menu (before a signal is detected) to
engage Auto Quiet. Display reads:
• Once the Auto Quiet mode is engaged, you may cancel
the audio alarm by pressing Quiet.
•Press Quiet (when the unit is not alarming) to cancel
Auto Quiet mode.
Quiet Mode
Quiet cancels audio during an alert and any new alert with-
in 20 seconds. After 20 seconds, approximately 2 beeps
are provided on any new alert and unit then remains quiet.
•Press Quiet to cancel the audio.
•Press Quiet a second time during an alert to restore the
standard audio alert pattern; or turn the unit off, then on.
1750/1760/1765 manual 3/6/02 2:20 PM Page 15

OPERATIONOPERATION
14 15
Stay Alert Feature
The Stay Alert Feature is designed to test a driver’s alert-
ness. To engage (when unit is not alarming):
•Press and hold City for approximately 2 seconds.
Release button during or immediately after the alert is
given. Display reads:
Within 30-60 seconds two beeps are sounded; to show alert-
ness, the driver must press either the City or Quiet button
within3-5seconds.Ifthebuttonispressedwithin3-5seconds,
the cycle is repeated.
If a button was not pressed within 3-5 seconds alarm sounds
andthe display reads:
• Press Power to exit.
WARNING!!! Stay Alert is NOT intended as a substitute for
adequate rest. You should NOT operate a vehicle if you are
drowsy. During extended periods of vehicle operation, you
should take frequent breaks. Improper reliance on the Stay
Alert feature may result in vehicle damage, personal injury or
death.NEVER OPERATE A VEHICLE IF YOU ARE DROWSY.
Dim/Dark Mode
Dim/Dark Mode reduces the illumination of the display.
•Press and hold Power for 2 seconds to reduceillumination
to a Dim setting. Display reads:
•Pressing and holding the power button for 2 seconds a
second time engages DarkMode. Display reads:
Dim or dark can be engaged during an alert. In Dark Mode,
the display goes dark for as long as a signal is being detect-
ed and for 20 seconds after, then the display returns to the
dimmer setting.
•Pressing and holding the power button a third time
restores full illumination to the display.
Engaging/Disengaging VG-2
See option select mode to turn this feature on.
1750/1760/1765 manual 3/6/02 2:20 PM Page 17

Option Select Mode
Entering Option Select Mode allows you to customize
options such as Tone Select, Compass Select, Abbreviated
Power Up Sequence and VG-2 Mode. When selecting
options, the , or quiet must be pressed within 20 sec-
onds or options mode will automatically be exited. To
enter: 1760/1765 Chart
Press: quiet *Display To Change, Option:
Reads: Press
For 2 seconds COMBO or Combo=Radar & Compass
Radar=No Compass
Compass=No Radar
2nd time TONE 3 = YES Tone 1, 2, or 3
= NO (3 different X, K, Ka
patterns)
3rd time TEST YES = ON X, K, Ka Audio tones
= OFF 1 beep during
Power Up
4th time VG2 OFF = ON Turns VG-2 On
= OFF Turns VG-2 Off
5th time SR = ON Turns Safety Radar On
ON = OFF Turns Safety Radar Off
6th time B SVR = ON Battery Saver On
ON = OFF Battery Saver Off
OPERATIONOPERATION
16 17
1750 Chart
Press: Quiet *Display To Change, Option:
Reads: Press
For 2 seconds TONE 3 or Tone 1, 2, or 3
(3 different X, K, Ka
patterns)
2nd time TEST YES = YES X, K, Ka Audio tones
= NO 1 beep during
Power Up
3rd time VG2 OFF = ON Turns VG-2 On
= OFF Turns VG-2 Off
4th time SR = ON Turns Safety Radar On
ON = OFF Turns Safety Radar Off
5th time VOICE = ON Real Voice engaged
ON = OFF Real Voice disengaged
6th time B SVR = ON Battery Saver On
= OFF Battery Saver Off
*Factory settings.
Press Power anytime to exit.
1750/1760/1765 manual 3/6/02 2:20 PM Page 19

OPERATION
Speed Radar Audio/Visual Alerts
When X, K or Ka is detected the band ID and signal
strength is displayed. The audio alert is continuous and
has a geiger counter-like pattern. The faster the beep the
closer or stronger the radar source. Example:
1 = weak signal, 9 = strong signal
Pulse Protection®
When a pulse type signal (instant on strong signal) is
detected an urgent 3 second audio warning is sounded
and the display reads:
After 3 seconds standard alert pattern continues.
18
RADAR ALERTS
19
Teach/Tutorial Mode
Provides simulated alerts for each type of signal.
•Press City and Quiet simultaneously and release. Display
reads:
Quiet mode can also be accessed while Teach/Tutorial
mode is engaged.
• Press Power to exit.
Vehicle Battery Saver Mode
The Vehicle Battery Saver Mode automatically shuts off
your detector within 3 hours if you forget to turn it off. The
timer is reset if the detector is turned off, unplugged or
any button is pressed before the 3 hours have expired. The
detector will alert you with an audible and visual warning
before it shuts off. Display reads:
During this warning you can reset the unit by pressing any
button. This will reset the timer.
If the unit has automatically turned itself off, press the
Power button to turn the unit back on. You can manually
engage the Vehicle Battery Saver Mode by pressing and
holding the City button until one beep is heard.
Refer to “Option Select Mode” for instructions for deacti-
vating battery saver mode feature.
1750/1760/1765 manual 3/6/02 2:20 PM Page 21

In communities where transmitters are located, the Safety
Warning System displays over 60 text messages. When
Safety Radar is detected the audio alert is geiger counter-
like.
Safety Warning System Text
Example: Poor Road Surface:
Note: Not all areas have Safety Warning System transmitters.
Visit the Safety warning System web page at www.safetyradar.com
for SWS locations.
LASER/VG-2 ALERTSSAFETY RADAR ALERTS
Laser Audio/Visual Alerts
When a laser signal is detected the word “Laser” and sig-
nal strength is displayed, the audio alert is continuous for
a minimum of 3 seconds. Example:
The more “|||” the closer the laser source.
VG-2 Audio/Visual Alerts
Note: You must turn this feature on in option select mode before
it will detect VG-2.
When aVG-2signalis detected,the detector“hides” its own
radiated signal and becomes undetectable by the VG-2.
Text message confirms detection of VG-2.
Every 30 seconds, the detector checks for a VG-2 signal. If
a VG-2 signal is still present, the unit continues to hide and
repeats the VG-2 alert. If no signal is detected, two beeps
are provided, indicating an “all clear” condition. During
VG-2 Alert X, K, and Ka band signals cannot be received.
(Reference page 27 for VG-2 information.)
Alert Priority
When two or more signals are received at the same time,
the alert priority is:
1. Laser
2. VG-2
3. Speed Radar
4. Safety Radar
Example:
If X band is alerting, then suddenly VG-2 is detected, the
VG-2 warning will override the X band alert.
20 21
1750/1760/1765 manual 3/6/02 2:20 PM Page 23

CARE & MAINTENANCE
Care And Maintenance
During the summer months, avoid prolonged exposure to
direct sunlight by removing your unit from the dash when
your vehicle is parked for an extended period of time.
Do not spray water, cleaners or polishes directly onto the
unit. The spray may penetrate through the openings and
damage the unit. Also, do not use any abrasive cleaners on
the unit’s exterior.
23
RESET FEATURES
22
Reset Features
All user features can be reset to factory settings.
• Unplug Power Cord from unit.
• Press and hold Power and Quiet.
• Plug Power Cord into unit.
• Wait for 2 beeps.
•Release Power and Quiet buttons. Unit is now reset.
1. Audio to level (4).
2. Display reads Highway.
3. Dim/Dark Mode to full illumination of display.
4. Auto Quiet Mode OFF.
5. VG-2 Detection Mode OFF.
6. Combo ON. (1760/1765 only)
7. Safety ON.
8. Vehicle Battery Saver ON.
9. Full Power Up sequence.
10. Default TONE 3.
11. Unit ON or OFF.
NOTE: Must calibrate compass after resetting features.
(1760/1765 only)
1750/1760/1765 manual 3/6/02 2:20 PM Page 25

ARE DETECTORS LEGAL?
In Most States YES!
Laser detectors are completely legal in every state when
used in automobiles or light trucks (under 10,000 lbs.).
Similarly, when used in automobiles or light trucks, radar
detectors are legal in almost every state. Exceptions are
Virginia and Washington, D.C., which have local regulations
restricting the use of radar receivers in any vehicle.
Concerning trucks over 10,000 lbs., the Federal Highway
Administration (FHwA) issued a regulation, effective
January, 1994 which prohibits radar and laser detector use
in these types of vehicles nationally.
Prior to the FHwA regulation, laws existed in the state of
New York restricting the use of radar detectors in trucks
over 18,000 lbs. and in Illinois in trucks over 26,000 lbs.
Radar Facts
A radar gun operates by transmitting radio waves at certain
frequencies which reflect off objects and are then picked up
by the radar gun’s receiving section. When a radar beam
reflects off a moving target, a measurable frequency shift
occurs. The radar unit converts this shift into miles per hour
to determine your vehicle’s speed.
Currently, the FCC (Federal Communications Commission)
permits operation of traffic radar guns at X Band (10.500 -
10.550 GHz), K Band (24.050 - 24.250 GHz), and Ka Band
(33.400 - 36.000 GHz).
Note: A radar detector will not alarm if an officer is not
transmitting on any one of the above radar bands.
25
TROUBLESHOOTING GUIDE
24
Your Whistler detector is expertly engineered and designed
to exacting quality standards to provide you with reliable,
trouble-freeoperation.Ifyourunit hasbeencorrectly installed
following the guidelines in this manual, but is not operating
optimally, please refer to the troubleshootingguide below.
PROBLEM: No display or audio.
• Check fuse in Whistler plug; replaceif necessary with a
2 amp 3AG type.
• Check fuse for lighter socket; replace if necessary.
• Make sure lighter socket is clean.
PROBLEM: Unit alarms when vehicle hits bumps.
• Check for loose lighter socket; tighten and clean.
• Check connections at both ends of power cord. Substitute
another cord to determine if cord is defective. Return
defective cord to the factory.
PROBLEM: Unit alarms when using vehicle equipment, electrical
accessories (brakes, power mirrors/windows, directionals, horn,
etc.), or when accelerating.
• Vehicle’s electrical system, including battery and alternator,
may have electrical noise. Install a filter capacitor (470mfd.
25 volt or larger capacitance value) on the back of the
lighter socket.
PROBLEM: Audio alerts are not loud enough.
• Cancel Auto Quiet Mode or City Mode.
• Check audiolevel setting (see page 12).
PROBLEM: No X band signals.
• Cancel City 2.
PROBLEM: Unit gives laseralert whenaccelerating.
• Possiblebador lowqualitydistributorcap. Replacewith highqual-
itycap.
If difficulties occur which cannot be solved by information in
this Troubleshooting Guide, please call Whistler Consumer
Relations at 1-800-531-0004 before returning your unit for
service.
1750/1760/1765 manual 3/6/02 2:20 PM Page 27

SPEED MONITORING TECHNOLOGIES
Other Speed Detection Systems
Several techniques other than radar or laser are used to
measure vehicle speeds. When these methods are being
used, no detector can provide a warning. These techniques
include:
• Pacing - A patrol car drives behind you and matches your
driving speed.
• Vascar/Aircraft - The time it takes a vehicle to travel a
known distance is measured.
Radar Detector Detectors (VG-2)
The Interceptor VG-2, or simply VG-2, is a microwave receiv-
er used by police to detect signals radiated by the local oscil-
lator of a radar detector. Because its purpose is to identify
persons driving with radar detectors, the VG-2 is known as a
“radar detector detector”.
The VG-2 is the primary tool used by the police to identify
radar detector equipped vehicles. If caught, in a state where
detectors are illegal, (see page 25), drivers risk losing their
radar detector and receiving a fine. In addition, instant-on
radar is almost always used in combination with a VG-2, leav-
ing unsuspecting motorists vulnerable to receiving two tick-
ets — one potentially for speeding, the other for possession
of a detector.
Having a radar detector capable of detecting the VG-2 may
alert you to the presence of a speed trap.
For more information on speed monitoring technologies,
please visit our FAQ page on our website:
www.whistlergroup.com
27
SPEED MONITORING TECHNOLOGIES
26
Laser Facts
It’s well documented that many radar guns cannot reliably
provide the speed of a targeted vehicle that is traveling in a
group of vehicles. In contrast, a laser gun can target a spe-
cific vehicle out of a line of traffic and determine its speed.
The advantage of laser over radar in terms of target identifi-
cation is the result of the laser gun’s narrow beam. A radar
transmission can cover more than a four-lane highway at a
distance of 1,000 feet, compared with a laser transmission
which covers about 6 feet at the same distance.
For best protection, keep these points in mind:
• Because your vehicle’s license plate or headlights are the laser gun’s
primary targets, mounting your Whistler detector on the dashboard can
improve laser detection at short range.
• Do not follow closely behind any vehicle you cannot see through. If you
can’t see past a vehicle ahead of you, chances are your detector won’t
either.
• The receiving range of your laser detector will not be the same as a radar
detector. Laser guns are most often used at short range.
Whistler Laser/Radar detectors receive all current laser guns
which operate at a laser wavelength of 905 +/- 10mm.
•Pro Laser™ I II III
• LT1 20-20
• Ultra Lyte
1750/1760/1765 manual 3/6/02 2:20 PM Page 29

WARRANTY INFORMATION
Whistler Repair Dept.
1201 North Dixieland Rd.
Rogers, AR. 72756
IMPORTANT:Whistler will not assume responsibility for loss
or damage incurred in shipping. Therefore, please ship your
unit insured with return receipt requested.
2.Includewithyourunitthe followinginformation,clearlyprinted:
• Your name and street address (for shipping via UPS),
adaytimetelephonenumber.(NoP.O.Boxplease.) and email
address(ifapplicable).
• A detailed description of the problem (e.g., “Unit per
forms self-testbutdoesnotrespondtoradar”).
• Acopyofyourdated storereceiptor billofsale.
3. Be certain your unit is returned with its serial number. For
reference,pleasewriteyourunit’sserialnumberinthefollowing
space: s/n__________________.
Unitswithoutserialnumbersarenotcoveredunderwarranty.
IMPORTANT:To validate that your unit is within the warranty
period, make sure you keep a copy of your dated store receipt.
Youmayregisteryourwarrantyonlineatwww.whistlergroup.com,
however,forwarrantyverificationpurposes,acopyofyourdated
storereceiptmustaccompanyanyunitsentinforwarrantywork.
29
WARRANTY INFORMATION
Consumer Warranty
This Whistler Radar/Laser detector is warranteed to the origi-
nal purchaser for a period of one year from the date of origi-
nal purchase againstall defectsin materials andworkmanship.
This limited warranty is void if the unit is abused, modi-
fied, installed improperly, if the housing has been
removed, or if the serial number is missing. There are no
express warranties covering this product other than those set
forth in thiswarranty. All express or implied warranties for this
product are limited to one year. Whistler is not liable for
damages arising from the use, misuse, or operation of this
product.
Service Under Warranty
During the warranty period, defective units will be repaired or
replaced (with the same or a comparable model), at Whistler’s
option, without charge to the purchaser when returned with a
dated store receipt to the address below. Units returned with-
out a dated store receipt will be handled as described in sec-
tion “Service Out Of Warranty.” Due to the specialized equip-
ment necessary for testing a radar/laser receiver, there are no
authorized service stations for Whistler brand detectors other
than the factory.
When returning a unit for service under warranty, please
follow these instructions:
1. Ship the unit in the original carton or in a suitable sturdy
equivalent, fully insured, with return receipt requested, and
shipping charges prepaid to:
28
1750/1760/1765 manual 3/6/02 2:20 PM Page 31

• Dimensions: 1750/1760 - 1.45"H x 3.15"W x 5.35"L
1765 - 1.52"H x 4.73"W x 3.45"L
• Weight: 1750/1760 - 6.8 oz.
1765 - 6.8 oz.
• Laser Wavelength:
905 ± 50 nanometers (nm)
• Radar Frequencies:
10.500 - 10.550 GHz (X Band)
24.050 - 24.250 GHz (K Band )
33.400 - 36.000 GHz (Ka Superwideband)
• Operating Temperature Range:
-20˚ C to +80˚ C (-4˚ F to +176˚ F)
• Power Requirements:
Operational 12 to 15 volts DC, 280mA nominal
Vehicle Battery Saver, 70mA nominal.
• Compass accuracy to 5°, resolution to 5°
One or more U.S. patents apply: #4,315,261; #5,146,227;
#5,379,456; #5,666,120, and #5,990,821. Other patents
pending.
Specifications are subject to change without notice.
SPECIFICATIONS
31
WARRANTY INFORMATION
30
Service Out Of Warranty
Units will be repaired at “out of warranty” service rates
when:
• The unit’s original warranty has expired.
• Dated store receipt is not supplied.
• The unit has been returned without its serial number.
• The unit has been abused, modified, installed improper-
ly, or had its housing removed.
The minimum out of warranty service fee for your Whistler
detector is $55.00 (U.S.). If you require out of warranty serv-
ice, please return your unit as outlined in the section
“Service Under Warranty” along with a certified check or
money order for $55.00. Payment may also be made by
MasterCard, VISA or American Express; personal checks
are not accepted. In the event repairs cannot be covered
by the minimum $55.00 service fee, you will be contacted
by a Whistler technical service specialist who will outline
options available to you. If you elect not to have your unit
repaired/replaced, it will be returned to you along with
your certified check or money order.
IMPORTANT: When returning your unit for service, be cer-
tain to include a daytime telephone number and email
address (if applicable).
Consumer Relations
If you have questions concerning the operation of your
Whistler detector, or require service during or after the
warranty period, please call Consumer Relations at
1-800-531-0004. Representatives are available to answer
your questions Monday - Friday from 8:00 a.m. to 5:00 p.m.
(CT).
1750/1760/1765 manual 3/6/02 2:20 PM Page 33

NOTESACCESSORIES
33
32
The following accessories can be ordered directly from
Whistler by calling 1-800-531-0004 or visit our online store
at www.whistlergroup.com
Order Description Price
Code
202138 Visor Bracket $ 6.95
202140 Windshield Bracket Kit $ 9.95
206294 *Modular Lighter Plug $ 7.95
(Requires 206550 or
206551)
206550 *Modular Straight $ 6.95
Power Cord (5')
(Requires 206294)
206551 *Modular Coiled $ 7.95
Power Cord (7')
(Requires 206294)
206552 Straight Power Cord (5’) $ 14.95
206553 Coiled Power Cord (7’) $15.95
206879 Hook & Loop $ 1.95
206880 Hardwire Kit (10' ) $ 9.95
(for wiring to fuse box)
203283 Socket Multiplier $ 9.95
(Requires 206550 or 206551)
206666 Extra suction Cups $ 9.95
*Modular: interconnecting pieces cord and plug.
Shipping and handling (per order) $5.00
Prices are subject to change without notice.
PLEASE SHIP TO:
Name______________________________________________
Street______________________________________________
City________________________State_______Zip___ __ ____
Telephone Number (______) __________________________
Order Code/Description Quantity Total Price
$
Subtotal
Sales Tax (if Applicable)
Shipping and Handling* $ 5.00
Total Enclosed $
SEND ORDER FORM WITH CERTIFIED CHECK OR
MONEY ORDER TO: Whistler CTS
PO Box 1844
Bentonville, AR 72712
IF PAYING BY MASTERCARD, VISAOR AMERICAN EXPRESS
PLEASE PROVIDE:
TypeofCard ___MasterCard ___Visa ___AmericanExpress
Name on Card______________________________________
Card Number_______________________________________
Expiration Date_____________________________________
Cardholder Signature________________________________
*For expedited shipping costs, contact Whistler Customer Service, 1-800-531-0004
1750/1760/1765 manual 3/6/02 2:20 PM Page 35