WOODPLAY PG203 User manual

PA-MA-0006-05
817 Maxwell Avenue • Evansville, IN 47711 • 1-800-GO-SWING • www.escaladesports.com • ©2016 Escalade Sports
PG203
(MONKEY BARS)

PARTS LIST
1
ITEM NO. PART NUMBER DESCRIPTION QTY.
1 PG-HW-M005 MONKEY BAR BRACKET 2
2 PG-HW-M006 MONKEY BAR TRIANGLE PLATE 2
3 PG-ST-0002 19" ROUND RUNG 6
4 PG-44-0012 HORIZONTAL LADDER RAIL - RIGHT 1
5 PG-44-0011 HORIZONTAL LADDER RAIL - LEFT 1
6 PG-ST-0001 25 3/4" ROUND RUNG 4
7 PG-44-0009 VERTICAL LADDER RAIL - LEFT 1
8 PG-44-0010 VERTICAL LADDER RAIL - RIGHT 1
9 PG-HW-S006 #10 X 2" SELF TAPPING SCREW 20
10 PG-HW-W002 1/4" FLAT WASHER 8
11 PG-HW-L001 1/4" x 1.5" LAG SCREW 8
12 PG-HW-W003 5/16" FLAT WASHER 4
13 PG-HW-L003 5/16" X 2.5" LAG SCREW 4
14 PG-HW-W004 3/8" FLAT WASHER 4
15 PG-HW-B001 3/8"-16 x 6.5" HEX BOLT 2
16 PG-HW-N001 3/8" NYLON LOCKNUT 2
17 PG-HW-N003 3/8"-16 ACORN NUT 2

STANDARD PARTS
PG-HW-M005
MONKEY BAR BRACKET
(2 )
#1
2
PG-HW-M006
MONKEY BAR TRIANGLE PLATE
(2 )
#2
PG-ST-0002
19” ROUND RUNG
(6)
#3
PG-44-0012
HORIZONTAL LADDER RAIL - RIGHT
(1)
#4
PG-44-0011
HORIZONTAL LADDER RAIL - LEFT
(1)
#5 PG-ST-0001
25 3/4” ROUND RUNG
(4)
#6
PG-44-0009
VERTICAL LADDER RAIL - LEFT
(1)
#7
PG-44-0010
VERTICAL LADDER RAIL - RIGHT
(1)
#8

3
0
1
2
3
4
5
6
7
8
9
#13
5/16” x 2.5" Lag Screw
PG-HW-L003
(4)
Measurement taken from bottom of bolt head to the bottom of bolt
HARDWARE
#10
1/4" Flat Washer
(8)
PG-HW-W002
#14
3/8" Flat Washer
(4)
PG-HW-W004
PG-HW-W003
#12
5/16" Flat Washer
(4)
PG-HW-L001
#11
1/4"" X 1.5" Lag Screw
(8)
#15
3/8-16” X 6.5" HEX BOLT
PG-HW-B001
(2)
#16
3/8” NYLON LOCK NUT
PG-HW-N001
(2)
PG-HW-N003
#17
3/8”-16 ACORN NUT
(2)
PG-HW-S006
#9
#10 X 2” Self Tapping Screw
(20)

VERTICAL LADDER RAILS ASSEMBLY
#7
#8
#6
PARTS NEEDED
#6 25 3/4” ROUND RUNG (4)
#7 VERTICAL LADDER RAIL - LEFT
(1)
#8 VERTICAL LADDER RAIL - RIGHT (1)
1. On a flat surface lay item #8 with holes facing up,
insert items #6 into holes.
2. Lining up holes with items #6 place item #7 onto
items #6.
3. Once all items are in place secure by tapping item #7 lightly with
rubber mallet ensuring items #6 are firmly seated in items #7
and #8. 22 9/16”
NOTE: After assembly width at both ends should be 22 9/16” inside to inside.
4
MEASUREMENT TO INSIDE OF RAILS

5
#9
#7
#8
HARDWARE NEEDED
#9 #10 X 2” SELF TAPPING SCREWS (8)
1. Lay Vertical Ladder Assembly with screw holes facing up, and secure
items #6 to items #7 and #8 with hardware item #9
VERTICAL LADDER RUNG TO LADDER RAILS
ATTACHMENT
#6

6
HORIZONTAL LADDER RAILS ASSEMBLY
PARTS NEEDED
#3 19” ROUND RUNG (6)
#4 HORIZONTAL LADDER RAIL - RIGHT (1)
#5 HORIZONTAL LADDER RAIL - LEFT (1)
#5
#3
#4
1. On a flat surface lay item #5 with holes facing up,
insert items #3 into holes.
2. Lining up holes with items #3 place item #4 onto
items #3.
3. Once all items are in place secure by tapping item #4 lightly with
rubber mallet ensuring items #3 are firmly seated in items #4
and #5.
22 3/8”
NOTE: After assembly width at both ends should be 22 3/8” outside to outside.
MEASUREMENT TO OUTSIDE OF RAILS

7
HORIZONTAL LADDER RUNG TO LADDER RAILS
HARDWARE NEEDED
#9 #10 X 2” SELF TAPPING SCREWS (12)
#10 1/4" WASHER FLAT (4)
#11 1/4" X 1.5” LAG SCREW (4)
ATTACHMENT
#4
#9
#5
1. Lay Horizontal Ladder Assembly with screw holes facing up, and
secure items #3 to items #4 and #5 with hardware item #9.
2. Attach item #1 to bottom of Horizontal Ladder Assembly 1 3/8” from
end of rail using hardware items ##10 and #11.
(Bracket to be centered on Ladder Rail)
#3
13
8
"
#1
#11
#10
BRACKET TO BE CENTERED ON LADDER RAIL
PARTS NEEDED
#1 MONKEY BAR BRACKET (2)
NOTE: Install #1 Brackets on the
opposite end of the countersinks.
#1

HORIZONTAL LADDER TO VERTICAL LADDER
ATTACHMENT
PARTS NEEDED
VERTICAL LADDER ASSEMBLY (1)
HORIZONTAL LADDER ASSEMBLY (1)
#2 MONKEY BAR TRIANGLE PLATE (2)
HARDWARE NEEDED
#12 5/16” FLAT WASHER (4)
#13 5/16” X 2.5” LAG SCREW (4)
#14 3/8” FLAT WASHER (4)
#15 3/8”-16 X 6.5” HEX BOLT (2)
#16 3/8” NYLON LOCK NUT (2)
#17 3/8”-16 ACORN NUT (2)
1. Attach item #2 to Horizontal Ladder Assembly using pre-drilled hole and hardware
item #12 and #13.
(Edge of item #2 should align with edge of Horizontal Ladder Assembly)
2. Attach Vertical Ladder Assembly to Horizontal Ladder Assembly and item #2 using
hardware items #14, #15, #16, and #17.
3. Attach item #2 to Vertical Ladder Assembly using hardware item #12 and #13.
HORIZONTAL LADDER
ASSEMBLY
VERTICAL LADDER
ASSEMBLY
#17
#13
#12
#2
#15
#14
#14
#16
#12
#13
#15
#14 #12
#13
#14
#16
#17
#2
#2
SEE NOTE 1
8
NOTE: Three holes are provided in the Vertical Ladder to allow
for adjustment of grade of yard. Use center hole for level ground.

9
PARTS NEEDED
PLAY SET ASSEMBLY (1)
MONKEY BAR ASSEMBLY (1)
HARDWARE NEEDED
#10 1/4" WASHER FLAT (4)
#11 1/4" X 1.5” LAG SCREW (4)
#10
#11
1. Center and place Monkey Bar Assembly against Play set Assembly as shown.
2. Attach using hardware items #10 and #11 as shown.

For warranty service, contact:
Woodplay Playsets
Escalade Sports
P.O. Box 889
Evansville, IN 47706
1-800-GO-SWING
Or E-Mail us at: [email protected] Revised 2015
5 Year Warranty
Subject to proper installation and normal residential use, Woodplay warrants, subject to the limitations stated below, to the original
retail purchaser, all chain, seats, swing hangers, hardware, metal braces, ropes and accessories to be free from defects in
material and workmanship for a period of five years from date of purchase. Cracks in non -functional plastic components are not
considered defects in materials and workmanship if they do not affect the functionality of the playset. Merchandise covered under
this limited five-year warranty will, at our option, be repaired or replaced, excluding any freight or labor fees.
15 Year warranty
In addition, for Fifteen years after the original purchase date of our Cedar playsets, Woodplay warrants, to the original retail
purchaser, all wooden components against structural failure due to corrosion, wood rot, or insect infestation. Seasonal checks,
surface cracks, knotholes and knots, natural characteristics of all wooden play equipment, not resulting in structural failure, are not
covered under this warranty. And will not affect the integrity of your playset.
Limited Lifetime Warranty
In addition, for the lifetime of our Redwood playsets, Woodplay warrants, to the original retail purchaser, all wooden components
against structural failure due to corrosion, wood rot, or insect infestation. Seasonal checks, surface cracks, knotholes and knots,
natural characteristics of all wooden play equipment, not resulting in structural failure, are not covered under this warranty. And will
not affect the integrity of your playset. Woodplay warrants to the original retail customer that we will replace any swing hangers,
swing chains, metal braces, metal rungs or hardware that fail due to rust or breakage (excludes surface rust). This limited lifetime
warranty also applies to our exclusive Super Slide, Hurricane Slide and Alpine Slide.
Timber is a natural material which can absorb and release moisture. Although this product is designed to minimize this effect, in
certain circumstances some movement or distortion is unavoidable. During dry hot weather timber may shrink and check - this is a
normal process of weathering. After the first year of service it is advisable to clean and apply a non-toxic stain or sealant to the
wood, safe for children’s use.
Components covered under this 5 year, 15 year and limited lifetime warranty will be replaced free of charge excluding freight
and labor fees.
Non-residential use of the playset is prohibited and voids the warranty as the playsets are designed for residential use only.
Escalade Sports reserves the right to examine photographs and/or physical evidence of merchandise claimed to be defective, and
to recover said merchandise, prior to disposition of warranty claims. Merchandise returned to our factory for examination or
recovery must be shipped freight prepaid, unless a Return Authorization Number is issued.
This warranty program does not cover normal wear and tear, color fading, or damages resulting from misuse, abuse, vandalism,
alteration, acts of God, or assembly and maintenance contrary to our instructions. Escalade Sports assumes no responsibility for
incidental or consequential damages which may arise from the purchase or use of our equipment. Please supervise your
children’s play activity and maintain your play equipment periodically.
This warranty is expressly in lieu of all other warranties, expressed or implied, including warranties of merchantability or fitness for
use. Woodplay does not assume or authorize any person to assume for us, any other liability in connection with the sale of our
products.
Special Note: Woodplay reserves the right to make changes in materials, design, and pricing without notice. See your instruction
manual for maintenance requirements. Your child’s safety is your responsibility; therefore, you should inspect this equipment
regularly for wear and safety.
2016 WARRANTY