World Market Connor 557442 User manual

SKU - 557442
THANK YOU FOR YOUR PURCHASE. IF YOU HAVE ANY QUESTIONS
Assembly Instructions
Page 1
Connor Metal Strap Hurricane Scone
NOT FOR COMMERCIAL USE.

Label
A1
B
Frame
Description Qty
Picture
Glass 1
Page 2
Component List
H-1 Screw 1
H-2 1
Philips
Screw Driver not included
T-1
Hardware List
Tool List
(L 32x ø 4mm
Dry Wall Anchor
(L 41x ø11 mm)
T-2 Drill Machine
-12mm)
not included

Before Beginning:
Read instructions, cover to cover.
Unpack all hardware bags and components to ensure you have all parts.
Save all packaging until finished.

A
B
Align and insert ring of the Frame (A) onto Screw (H-1) as shown above in the
drawing. Place Glass (B) on sconce as shown above in the drawing. Product is
ready to use.
Mark the location of the hole at the desired location. Pre-drill holes at the marked location
with Drill Machine (T-2) (not included). Insert Drywall anchor (H-2) in the pre-drilled holes
and tighten fully with Philips screwdriver (T-1) (not included) until flush. Align Screw (H-1)
onto installed Drywall anchor (H-2) and tighten with Philips screwdriver (T-1). Leave 1"
Screw (H-1) protruded from the wall.
(T-2) (Not included)
(H-1)(T-1) (Not included)
(H-2)
Step-1
Step-2
ASSEMBLED VIEW