World Market 536032 User manual

Umbrella Frame
Umbrella Canopy
(Canopy sold separately to use with the frame and pole.)

Place the canopy (D) over the umbrella frame (B), set all the rib ends into the fabric pockets.
Position the umbrella frame (B) inside the canopy (D).
4

Place assembled canopy and frame into an umbrella stand (sold separately).
For initial use, insert locking pin to the 2nd hole and allow canopy to stretch.
After stretching, the canopy will be able to go to the full position.
Press the button as shown above and slowly tilt until you hear and feel a click, Then release the button.

To avoid shrinkage of the canopy, after rainy or inclement weather open the umbrella
to dry. This is especially important for 100% cotton.
Make sure canopy is completely dry before storing.
Not for commercial use, for residential use only.
Do not write on furniture without a padded barrier to protect the surface.
Do not place pole or canopies near heating or cooling vents.
Do not clean pole or canopies with harsh cleansers or polish.
Do not put hot items directly on the umbrella pole or canopy.
Stains on canopies may be removed with mild soap solution and a damp cloth.
Cleaner
MILD
Store pole or canopy in a dry covered area when not in use to preserve the beauty
of the product.
Do not leave children unattended around or under this product.
Tilt the umbrella to the left or right to provide more shade coverage.
,
Tilting pole has 3 positions,left,center and right.
Do not attempt to assemble or open the umbrella in windy, rainy or inclement conditions.
Put the frame in the upright position, do not leave in a tilting position. If umbrella canopy is
already assembled on the frame to avoid tipping close during windy, rainy or inclement
conditions and ensure the frame is in the upright position.