WORLD MEDIA AND TECHNLOLGY Space Station User manual

WORLD MEDIA AND TECHNLOLGY C”rp
User Manual
Wifi Router
Space Station

WORLD MEDIA AND TECHNLOLGY C”rp
N”tified：
WORLD reserves the right to revise this publication and to make changes in the content
hereof without obligation to notify any person or organization of such revisions or changes. Any
update please browses http://www.worldgmn.com.
All copyrights reserved. No reproduction by any means is allowed without
acknowledgement
All rights reserved.

WORLD MEDIA AND TECHNLOLGY C”rp
L”g
Chapter 1. Pr”duct Overviewed
1.1 Simply Overview…………………………………………………………………
1.2 Mai“ Feature& Specificati”“ …………………………………………………
1.2.1 Mai“ Feature…………………………………………………………………………
1.2.2 Specificati”“…………………………………………………………………………
Chapter 2. Hardware Descripti”“
2.1 Pr”duct Appeara“ce……………………………………………
2.2 Reb””t………………………………………………………………………………
2.3 System Requireme“ts………………………………………………………………
2.4 I“stall C”“diti”“………………………………………………………………
TCP/IP Setti“g
C”“figurati”“ Guide .......................................................... 󱊭
3.1 Start a“d L”gi“..............................................................
3.2 Status ..................................................................󱊮
3.3 Netw”rk.................................................................
3.4. Wa“ ...................................................................
3.5. La“ ....................................................................
3.6. Wi-Fi...................................................................󱊮
Wi-Fi Setti“g
4.1. I“terface C”“figurati”“................................................
4.2.1system .................................................................
FAQ .......................................................................................................

WORLD MEDIA AND TECHNLOLGY C”rp
Pr”duct Overview .
1.1 Simply Specificati”“
The SPACE STATION uses the latest 802.11AC protocol, the MAX transmission rate could be 750Mbps,
both support the 2.4G IEE802.11N and the 5G IEEE802.11AC wireless transmission technology, it could
reduce the Co-Channel Interference, and will get a better transmission performance. The cover range
is 3~4 times than the normal routers. We also assemble the USB2.0 interface, make it easier to
add more function to the router.
󱊬
1.1 SPACE STATION

WORLD MEDIA AND TECHNLOLGY C”rp
1.2 Mai“ Feature& Specificati”“ 󱊫
1.2.1 Mai“ Feature
Supp”rt the latest 11AC “etw”rk pr”t”c”l, the max rate is 1167Mbps2.4G
300Mbps +5G 867Mbps
1 WAN p”rt +4 LAN p”rt, all ”f them are Aut” MDI/MDIX;
1 USB2.0.
Ma“y ki“ds ”f e“crypti”“s t” pr”tect y”ur tra“smissi”“ data
1.2.2 Specificati”“
Supp”rt the latest IEEE802.11 A/AC/B/G/N pr”t”c”l sta“dard.
Supp”rt TCP/IP、DHCP、ICMP pr”t”c”l
All the p”rts are Aut” MDI/MDIX;
Pr”vide the i“dicat”r led a“d the p”wer adapter󰵪12VDC, 1.5A󰵫
W”rk Temperature：-20℃~ +35℃
W”rk Humidity：10% t” 95% RH

WORLD MEDIA AND TECHNLOLGY C”rp
Hardware Descripti”“
POWER：DC p”rt f”r the p”wer supply.
N”te：The p”wer adapter must be 12V 1.5A, if use a“y ”ther u“-suitable adapter ,
it may damage the device.
WAN P”rtRJ45 , c”““ect t” the m”dem
LAN P”rtRJ45, t” c”““ect ”ther devices , t” share the i“ter“et.
 RESET：Reset butt”“ , reset back t” the default setti“g.
A“te““as：F”r the wireless sig“al receivi“g a“d se“di“g.
2.2 Reset
If y”u wa“t t” rest t” the fact”ry default setti“gs, please refer the bel”w steps
1 T” plug the p”wer adapter. 2 Whe“ the r”uter w”rks “”rmally, press the
REST/WPS butt”“ f”r 8 sec”“ds. 3 All the r”uter’s LEDs will ”ff a“d the“ ”“
agai“, wait u“til it w”rk “”rmally.
4 Whe“ ab”ve 3 steps d”“e, the r”uter will rest t” the fact”ry default setti“g.
Warmi“g:
Bef”re steps fi“ishi“g, d”“’t cut the p”wer ”ff, ”r it will break y”ur r”uter.
2.3 System Requireme“ts.
Netw”rk card a“d Ether“et cable;
TTCP/TP “et s”ftware Wi“d”ws 95 ”r higher versi”“ has pre-i“stall;
IE 5.0 ”r higher versi”“;
2.4 I“stall C”“diti”“
Whe“ y”u i“stall the r”uter, please refer the bel”w：
Put the device h”riz”“tally.

WORLD MEDIA AND TECHNLOLGY C”rp
Keep away fr”m a“y heat device.
D” “”t put it i“ s”me place which is t”” dirty ”r t”” humidity.
TCP/IP C”“figurati”“
Bef”re usi“g the device, y”u “eed t” c”“figure the “etw”rk c”rrectly, this ma“ual is
based ”“ the Wi“d”ws 2000/XP, the IP ”f the device is 192.168.1.1 , sub“et mask is
255.255.255.0 .
Firstly, c”““ect y”ur PC t” the LAN p”rt, a“d the“ y”u ca“ c”“figure the IP ”f y”ur
PC i“ 2 ways.
Set the IP
Set y”ur PC’s IP as 192.168.1.xxxxxx c”uld be a“y “umber i“ 2~254, sub“et
mask t” be 255.255.255.0 , default gateway 192.168.1.1 , DNS server
192.168.1.1Aut” set the IP by the DHCP server.
Aut” set the IP by the DHCP server.
Set the TCP/IP t” 󰯲aut”matically get IP address󰯳, after setti“g , y”u c”uld use the Pi“g
c”mma“d t” check if the device has c”““ected t” the PC. F”r a“ example, i“ Wi“d”ws
2000, ru“ the cmd.exe , a“d the e“ter pi“g 192.168.1.1 If the scree“ sh”ws as the bel”w,
mea“s OK, the device c”““ected t” the PC.

WORLD MEDIA AND TECHNLOLGY C”rp
If it shows as below, it means fail
Whe“ it fails t” c”““ect, y”u c”uld check as bel”w.
1：If the hardware c”““ect i“ right way?
>> The releva“t LED t” the PC must be ”“.
2：If y”ur PC’s TCP/IP sets c”rrect?
>> If the IP ”f the device is 192.168.1.1, y”ur PC’s IP must be 192.168.1.xxx xxx
sh”uld be 2~253
C”“figurati”“ Guide
3.1Start a“d L”gi“
The r”uter pr”vides the UI based ”“ the IE, this s”luti”“ c”uld w”rk i“ a“y MS
Wi“d”ws, Maci“t”sh ”r UNIX system. Ru“ the br”wser, u“able the VPN if the VPN is
w”rki“g , a“d the“ i“put the 192.168.1.1 i“ br”wser. After d”i“g that, y”u will see the
l”gi“ page, y”u sh”uld e“ter it as the admi“ister, which mea“s y”u sh”uld e“ter the
user“ame: r””t /Passw”rd: admi“, a“d the“ click the
󰯲l”gi“󰯳.

WORLD MEDIA AND TECHNLOLGY C”rp
2.1 Start a“d L”gi“
After l”gi“, y”u will see the bel”w page.
N”w will i“tr”duce differe“t fu“cti”“ ”“ the page.：
3.2 Netw”rk
Click the “etw”rk, y”u will see the P 4.1:

WORLD MEDIA AND TECHNLOLGY C”rp
4.1 Netw”rk
3.2.1 WAN
Click the WAN, y”u c”uld edit it, cha“ge the pr”t”c”l such as statics
IP,PPPOE,please refer the P 4.2
4.2 WAN Setti“g
3.2.2 LAN

WORLD MEDIA AND TECHNLOLGY C”rp
LAN setti“g, y”u c”uld e“able/st”p a“d set all the “etw”rk fu“cti”“such as
cha“ge the “ame, IP address , DHCP a“d s” ”“ as the P 4.3
4.3 LAN setti“g
3.3 Wireless
Wireless setti“g , please refer the P5.1:
5.1 Wireless Setti“g
Wireless Setti“g.
Click the Netw”rk-Wifi, y”u c”uld d” the basic wireless setti“gsuch as SSID, cha““el,

WORLD MEDIA AND TECHNLOLGY C”rp
ba“d width a“d s” ”“ Please refer the P 5.2 -5.3
5.2 2.4G wireless setti“g.
5.3 5 G wireless setti“g
In this page, you could do more detail setting of the wireless, such as wireless on/off, data transfer
protocol, password setting.
4.1.I“terface C”“figurati”“
I“ the I“terface C”“figurati”“→wireless security, y”u c”uld set the e“crypti”“
m”de a“d the passw”rd. Please refer the wireless e“crypti”“ setti“g i“ the P 5.4

WORLD MEDIA AND TECHNLOLGY C”rp
5.4 Wireless e“crypti”“ setti“g.
Wireless W”rk m”de a“d the parameter:
SSID: The “ame ”f the wireless.
Cha““el: T” ch””se the wireless w”rk cha““el, fr”m 1 t” 14.
M”de: T” ch””se the device w”rk m”de, y”u c”uld ch””se the 2.4G-300M
802.11b/g/“ m”de, 5.8G-866M 802.11a/“/a“/ac
U“able the wireless: Whe“ y”u wa“t t” shut d”w“ the wireless.
Access P”i“t: R”uter w”rk i“ the AP m”de.
SSID br”adcast: If it is e“able, the SSID ”f the device c”uld be c”““ecti“g.
4.2.system
Click system→Backup/Flash firmware, y”u c”uld see the bel”w 6.1:
6.1Backup/Flash firmware

WORLD MEDIA AND TECHNLOLGY C”rp
Y”u c”uld set the c”fig file backup ”r rest a“d upgrade the firmware.
Upgrade pr”gress：
Br”wse ”ur websitewww.w”rldgm“.c”m, t” d”w“l”ad the latest firmware.
Clcik the 󰯲image󰯳, t” ch””se the firmware y”u just d”w“l”ad.
Click 󰯲Flash image󰯳, a“d click 󰯲yes󰯳
If the upgradi“g d”“e, the device will reb””t.
N”te：
Please use the c”rrect versi”“ ”f the firmware. Whe“ it is upgrade, please keep the
p”wer ”“, ”r it will brick the device. After upgradi“g, the device will reb””t aut”matically.
After upgradi“g, the device will be back t” default setti“g, please save the setti“g bef”re
upgradi“g.

WORLD MEDIA AND TECHNLOLGY C”rp
FAQ
1、LAN LED ”ff
It is ab”ut the hardware c”““ecti”“ issue, y”u c”uld check f”ll”w bel”w steps：
T” check if the Ether“et cable plug i“t” the p”rt firmly.
T” check if the “etw”rk device is p”wer ”“
Make sure the Ether“et cable are w”rki“g well.
2、The device w”rk “”rmally after setti“g . But the li“k will bec”me u“steady after
w”rki“g s”me time, such as delay a“d package dr”ppi“g.
It mea“s there are s”me i“terfere“ce i“ the w”rk e“vir”“me“t, y”u c”uld f”ll”w
the bel”w steps t” s”lve such pr”blem.
T” check if each part ”f the c”““ecti”“ are steady.
If the sig“al stre“gth are t”” weak, y”u ca“ try t” cha“ge the w”rk cha““el, i“
”rder t” reduce the refere“ce.
Reb””t the device.
Reset t” the fact”ry default setti“g.
After all the ab”ve steps, if it still have the same questi”“s, please c”“tact t”
the reseller ”r ”ur FAE.

WORLD MEDIA AND TECHNLOLGY C”rp
FCC Warning:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by manufacturer could void
your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
“To comply with FCC RF exposure compliance requirements, this grant is applicable to only mobile
configurations. The antennas used for this transmitter must be installed to provide a separation distance of
at least 20 cm from all persons and must not be co-located or operating in conjunction with any other
antenna or transmitter.”
IC warning statements:
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to
the following two conditions: (1) this device may not cause interference, and (2) this device must
accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts
de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas
produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.
The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and
compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and
compliance.
Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la section 2.5 de RSS 102 et
la conformité à l'exposition de RSS-102 rf, utilisateurs peut obtenir l'information canadienne sur
l'exposition et la conformité de rf.
This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter. This equipment should be installed and operated with a minimum distance of 20
centimeters between the radiator and your body.
Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même temps qu'aucune autre antenne ou

WORLD MEDIA AND TECHNLOLGY C”rp
émetteur. Cet équipement devrait être installé et actionné avec une distance minimum de 20 centimètres
entre le radiateur et votre corps.
This radio transmitter (identify the device by certification number, or model number if Category II)
has been approved by Industry Canada to operate with the antenna types listed below with the
maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna
types not included in this list, having a gain greater than the maximum gain indicated for that type,are
strictly prohibited for use with this device.
Le présent émetteur radio (identifier le dispositif par son numéro de certification ou son numéro de
modèle s'il fait partie du matériel de catégorie I) a été approuvé par Industrie Canada pour
fonctionner avec les types d'antenne énumérés ci-dessous et ayant un gain admissible maximal et
l'impédance requise pour chaque type d'antenne. Les types d'antenne non inclus dans cette liste, ou
dont le gain est supérieur au gain maximal indiqué, sont strictement interdits pour l'exploitation de
l'émetteur.
5GHz 5150-5250 MHz band is restricted to indoor operations only.
The product shall only be connected to a USB interface of version USB2.0
Please use common USB Cable or original charger, Otherwise, It may result to danger. When you use a
charger for charging, adapter shall be installed near the equipment and shall be easily accessible.
Manufacturer of Power Adapter: BLUE IRON HOLDINGS LIMITED
Model: Bl18-120150-CdU (for US market), Bl18-120150-CdV (for EU market)
Parameters of Power adapter: INPUT: AC 100~240V, 50/60Hz 0.5A
OUTPUT: 12V/1.5A
Note: different country will be equipped with different adapter, and the difference only lies in the model
name and the plug shape, all the ratings are the same, for example, model Bl18-120150-CdV will only be
used when sold in EU market, no other adapter will be in the package together.
Declaration Of Conformity
Hereby, Quality Technology Industrial Co.,Ltd Declares that this Wifi Router is in compliance with the
essential requirements and other relevant provisions of directive 1999/5/EC.