Wunda Smart Hub User manual

ˊ˨ˡ˗˔ʺ˥ˢ˨ˣˣ˟˖
ʶ˔˦˧˟˘˚˔˧˘ʵ˨˦˜ˡ˘˦˦˃˔˥˞ʟ
˃ˢ˥˧˦˞˘˪˘˧˧ʟ
ʶ˔˟˗˜˖ˢ˧
ˁ˃ʥʩʨʴʷ

Registering the device
•
Reconnect the Smart Hub to the
mounted wall bracket.
Download the WundaSmart app from
the App Store or the Google Play Store:
Open the WundaSmart app on your
smartphone or web portal on your desk-
top at panel.wundasmart.com and
Sign in or Create an Account.
After Sign in register the device online,
using either:
I. Scan the Smart Hub’s QR code placed
on Smart Hub Card Activation with
your smartphone.
II. Discover devices online in local
network with the application on your
smartphone.
III. Copy the Serial number and the
Pairing code supplied with the device
in to the appropriate eld on the web
portal: panel.wundasmart.com.
If all connections have been made
correctly and you have registered your
device online, your control panel will
appear on the device list. Now you can
start conguring the system.
Fixing to the wall (optional)
•
Disconnect the bracket r from
thedevice,
•
Using two screws, x the bracket r
tothe wall,
1. Download & install application
2. Register account
3. Scan QR code
MAC address
70B3D5343FB1
Pairing code
1234 5678 90AB CDEF
Serial No
123456 123456 123456 123456 123456 12
Scan QR Code
1. Download & install application
2. Register account
3. Scan QR code
MAC address
70B3D5343FB1
Pairing code
1234 5678 90AB CDEF
Serial No
123456 123456 123456 123456 123456 12
Welcome
Welcome
http://get.wudasmart.com/ios
http://get.wundasmart.com/android
click
click
Discover devices
• A short press button o resets the
device,
•
Holding the button o for 5 seconds
until the red LED comes on resets the
login and password to the default
settings (root/root),
•
Turning on the power when holding the
button o until the red LED comes on re-
sets the device to the factory settings.
Resetting the device
o
Nominal supply
voltage: 12 VDC power adapter included
inthe set
Maximum current
consumption 100 mA
Maximum transmit
power <5 dBm e.r.p.
Radio
communications: 869.85 MHz, two-way
Radio coverage: up to 500 m in an
open area
External aerial: yes (in the set)
Interface: Ethernet Port
10/100 MBit
Signaling LED (RGB)
Operating
temperature range: 5 - 45 °C (excluding condensation)
Degree of protection IP20
Dimensions 98 x 98 x 28 mm
(without aerial)
Default DHCP on
Default IP address 192.168.0.129
Default username root
Default password root
Technical data