XINDAK XF-1000ES User manual

XF-1000ESINSTRUCTIONS
Chengdu Xindak Electronic Co. LTD.
is a registered trademark of Chengdu Xindak Electronic Co.,LTD
www.xindak.com
XD3.834.048 SMS Printed in China
All rights reserved by Chengdu Xindak Electronic Co. LTD.
Chengdu Xindak Electronic Co. LTD.
No. 13, Zone A, Dongsheng Industry Park, Huaishudian Road,
Chengdu, Sichuan, China.
Tel/Fax: [phone] AC LINE - Conditioner

PURPOSE AND CHARACTERS
NAME AND FUNCTION
USING STEP
NOTICE
PARAMETERS
INSTRUCTIONS XF-1000ES
Thank you for purchasing this AC LINE - Conditioner specially designed for Hi-Fi acoustics.It solved
the problem of scattering sound and impure tones caused by the interface of miscellaneouswaves in
the electrical network when playing.Meanwhile,it can be used for other electrical appliances in
conformity with the conditions of this appliance,which filters the miscellaneous waves produced by
appliance itself,but does not pollute the electrical network.To better use this appliance,please read
the following content carefully.
1Power Indication 2Polarity Detect Button
4Power Switch 5Output Group 3
7Output Group 1
10 Grounded Connection
8Power Input Socket
Voltage Meter
3
Output Group 2
6
Polarity Switch
9
1Power Indication 2Polarity Detect Button
4Power Switch 5Output Group 3
7Output Group 1
10 Grounded Connection
8Power Input Socket
Voltage Meter
3
Output Group 2
6
Polarity Switch
9
The phase detecting indicator：Indicate whether the phase of the power supply is corresponding.
If the indicator is on when touch the DETECT button or the indicator has been on before touching
it, it means the phase of the power supply is not corresponding, should change the phase switch to
change its phase.
Output Group 2: Supply 5A(Max.) current to the electro-equipment. This socket group is controlled
by the power switch.
Output Group 1: Supply output current of 3A (Max.) to the electric equipment. This socket group
CAN NOT be controlled by the power switch.On the power supply of the input socket is being
putting through, this socket group will output the power.
The power input socket: The power input interface of this machine, with the fuse box.
The grounded connection: This unit uses single-phase 3-lines input. When using the power supply
with single-phase 2-lines input which is not grounded, must ground this connection.
Because of the high voltage and heavy current inside, please not dismantle by yourself. If there is
any fault, please cut off the power supply and send it to examine and repair. Please disconnect this
unit with the power supply and the connected electric equipment, before changing the fuse.
Max Spike Volt.........................................................................3000V
Max Clamping Volt (8X20s).......................................................470V
Max Surge Current (8X20s).....................................................1000A
Noise Filter..................................................-10dB~55dB(2-100MHz)
Rating...................................................................AC250V 10A Max.
The phase detect：Put through the power. When the phase switch is in the position ,touch the
detect. If the indicator is on, it means the phase of the power supply input is not corresponding,
should change the phase switch; if the indicator is off, it means the phase of the power supply input
is corresponding.
Voltage Meter: Indicate the voltage of the power supply. The value is only for reference.
The switch for the power supply control: Through this switch can turn on or turn off the power of
Group 2 and Group 3 two output power socket groups.
Output Group 3: Supply the output power of 5.5A (Max.) to the electric equipment. This socket
group is controlled by the power switch.
1
Plug the attached 3-lines power cable into the power input socket on the rear
panel, the power indicator will be light on. Touch the phase detect touching
terminal to detect the phase of the power output socket. If the phase detect
indicator is not light, the power output socket will be: A: Ground, B: Natural,
C: Live. (See fig4) Otherwise, if the indicator is light it will be A: Ground,
B: Live, C: Natural.
This unit requires single-phase 3-lines input. When using single-phase 2-lines power input, DO
connect the grounded biding post on back of the unit to the ground and make sure the phase of the
input power is correct.
AB C
(Fig 4)
OFF
ON
AC POWER LINE RECEPTACLE/FILTER XF-1000ES
DETECT
INDICATION
Digital Accessories
1
Subtotal 3A Max. (Unswitchable)
Preamplifier/Accessories
2
Subtotal 5A Max. (Switchable)
Power Amplifier
3
Subtotal 5.5A Max. (Switchable)
NO.:
CHENGDU XINDAK ELECTRONIC CO., LTD
Made in China
Ground
Polarity
1
2
1
2
3
4
9
10
8
7
6
5
AC INPUT
～220V/230V ±10%
50/60Hz FUSE F10A
Always remove mains plug from wall
socket before any service unless
qualified to do so. This unit contains
dangerous voltages
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
SPECIFICATION
Max.Spike Volt ............................................................................. 3000V
Rating .......................................................................... AC 250V 10A max.
Max.Clamping Volt (8x20 SEC) ......................................................... 470V
Max.Surge Current (8x20 SEC) ........................................................ 1000A
Noise Filter ........................................................ -10dB～55dB(2～100MHz)
XF-1000ES
AC POWER LINE RECEPTACLE/FILTER

PURPOSE AND CHARACTERS
NAME AND FUNCTION
USING STEP
NOTICE
PARAMETERS
INSTRUCTIONS XF-1000ES
Thank you for purchasing this AC LINE - Conditioner specially designed for Hi-Fi acoustics.It solved
the problem of scattering sound and impure tones caused by the interface of miscellaneouswaves in
the electrical network when playing.Meanwhile,it can be used for other electrical appliances in
conformity with the conditions of this appliance,which filters the miscellaneous waves produced by
appliance itself,but does not pollute the electrical network.To better use this appliance,please read
the following content carefully.
1Power Indication 2Polarity Detect Button
4Power Switch 5Output Group 3
7Output Group 1
10 Grounded Connection
8Power Input Socket
Voltage Meter
3
Output Group 2
6
Polarity Switch
9
1Power Indication 2Polarity Detect Button
4Power Switch 5Output Group 3
7Output Group 1
10 Grounded Connection
8Power Input Socket
Voltage Meter
3
Output Group 2
6
Polarity Switch
9
The phase detecting indicator：Indicate whether the phase of the power supply is corresponding.
If the indicator is on when touch the DETECT button or the indicator has been on before touching
it, it means the phase of the power supply is not corresponding, should change the phase switch to
change its phase.
Output Group 2: Supply 5A(Max.) current to the electro-equipment. This socket group is controlled
by the power switch.
Output Group 1: Supply output current of 3A (Max.) to the electric equipment. This socket group
CAN NOT be controlled by the power switch.On the power supply of the input socket is being
putting through, this socket group will output the power.
The power input socket: The power input interface of this machine, with the fuse box.
The grounded connection: This unit uses single-phase 3-lines input. When using the power supply
with single-phase 2-lines input which is not grounded, must ground this connection.
Because of the high voltage and heavy current inside, please not dismantle by yourself. If there is
any fault, please cut off the power supply and send it to examine and repair. Please disconnect this
unit with the power supply and the connected electric equipment, before changing the fuse.
Max Spike Volt.........................................................................3000V
Max Clamping Volt (8X20s).......................................................470V
Max Surge Current (8X20s).....................................................1000A
Noise Filter..................................................-10dB~55dB(2-100MHz)
Rating...................................................................AC250V 10A Max.
The phase detect：Put through the power. When the phase switch is in the position ,touch the
detect. If the indicator is on, it means the phase of the power supply input is not corresponding,
should change the phase switch; if the indicator is off, it means the phase of the power supply input
is corresponding.
Voltage Meter: Indicate the voltage of the power supply. The value is only for reference.
The switch for the power supply control: Through this switch can turn on or turn off the power of
Group 2 and Group 3 two output power socket groups.
Output Group 3: Supply the output power of 5.5A (Max.) to the electric equipment. This socket
group is controlled by the power switch.
1
Plug the attached 3-lines power cable into the power input socket on the rear
panel, the power indicator will be light on. Touch the phase detect touching
terminal to detect the phase of the power output socket. If the phase detect
indicator is not light, the power output socket will be: A: Ground, B: Natural,
C: Live. (See fig4) Otherwise, if the indicator is light it will be A: Ground,
B: Live, C: Natural.
This unit requires single-phase 3-lines input. When using single-phase 2-lines power input, DO
connect the grounded biding post on back of the unit to the ground and make sure the phase of the
input power is correct.
AB C
(Fig 4)
OFF
ON
AC POWER LINE RECEPTACLE/FILTER XF-1000ES
DETECT
INDICATION
Digital Accessories
1
Subtotal 3A Max. (Unswitchable)
Preamplifier/Accessories
2
Subtotal 5A Max. (Switchable)
Power Amplifier
3
Subtotal 5.5A Max. (Switchable)
NO.:
CHENGDU XINDAK ELECTRONIC CO., LTD
Made in China
Ground
Polarity
1
2
1
2
3
4
9
10
8
7
6
5
AC INPUT
～220V/230V ±10%
50/60Hz FUSE F10A
Always remove mains plug from wall
socket before any service unless
qualified to do so. This unit contains
dangerous voltages
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
SPECIFICATION
Max.Spike Volt ............................................................................. 3000V
Rating .......................................................................... AC 250V 10A max.
Max.Clamping Volt (8x20 SEC) ......................................................... 470V
Max.Surge Current (8x20 SEC) ........................................................ 1000A
Noise Filter ........................................................ -10dB～55dB(2～100MHz)
XF-1000ES
AC POWER LINE RECEPTACLE/FILTER

XF-1000ESINSTRUCTIONS
Chengdu Xindak Electronic Co. LTD.
is a registered trademark of Chengdu Xindak Electronic Co.,LTD
www.xindak.com
XD3.834.048 SMS Printed in China
All rights reserved by Chengdu Xindak Electronic Co. LTD.
Chengdu Xindak Electronic Co. LTD.
No. 13, Zone A, Dongsheng Industry Park, Huaishudian Road,
Chengdu, Sichuan, China.
Tel/Fax: [phone] AC LINE - Conditioner