XPOtool 63017 User manual

Operation Manual
Drum Ventilator
63017, 63018
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Illustrations, functional steps and technical data may deviate insignificantly due to continuous further
developments.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.

https://www.naturewater.eu Item 63017, 63018 Page 2
The Tool Experts
11 2021-1
The information contained in this document may alter at any time without prior notice. No part of this
document may be copied or otherwise duplicated without prior written consent. All rights reserved.
WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating
manual, nor in the diagrams and illustrations shown.
Although WilTec Wildanger Technik GmbH has made every possible effort to ensure that this
operating manual is complete, accurate and up-to-date, errors cannot be ruled out entirely.
If you have found an error or wish to suggest an improvement, we look forward to hearing from you.
Send us an e-mail to:
[email protected]
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in several languages can be found in our online shop:
https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler Germany
Do you wish to collect your goods? Our address for collection is:
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler Germany
In order to shorten the waiting time and to allow for an easy on-site processing, we kindly ask you to
contact us briefly beforehand or to place your order via the webshop.
E-mail: [e-mail]
Phone: [phone]
Fax: [phone]
To return your goods for exchange, repair or other purposes, please use the following address.
Attention! To allow for a trouble-free complaint or return, it is important to contact our customer service
team before returning your goods.
Retourenabteilung
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler Germany
E-mail: [email protected]o
Phone: [phone]
Fax: [phone])

https://www.naturewater.eu Item 63017, 63018 Page 3
The Tool Experts
11 2021-1
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk of injury, we ask you to
always take some basic safety precautions when using this product. Please read this operating
manual carefully and make sure that you understand it.
Keep these operation instructions in a safe place.
Safety instructions
For your own safety, read all instructions very carefully. When using an electrical device, to avoid the
risk of fire, electric shock, and/or injury, the following safety instructions must always be followed:
•This device must be installed by a qualified electrician in accordance with local and national
regulations. Structural changes or additions to the cabling must be carried out by a recognized
electrical mechanic or a person authorized by law to work on fixed wiring.
•The drum fan must be connected to a power supply with 220–240 V alternating current and
50 Hz.
•Work on the electrical system of this device may only be carried out after the power supply
has been disconnected. This can be done by removing the spark plug or turning off the circuit
breaker. This ensures that all poles are disconnected from the mains.
•The fan must be earthed.
•Do not use the fan outside. It is dangerous to place the fan where it can be exposed to water
or moisture.
•Do not connect the fan motor to a dimmer switch. Insufficient power could occur (indicated by
a hum of the motor). The motor could be damaged.
•Keep children away from the device. Never leave them unattended whenever they are near it.
Make sure that children cannot play with the device. The device can only be used by children
from the age of 8 and persons with reduced physical, sensory, or mental abilities or a lack of
experience or knowledge if they have been instructed concerning safe use of the device and
are able to understand the possible dangers. Children may only clean and maintain the device
if they are supervised.
•It is not recommended that the fan be used with gas appliances in the same room at the same
time.
•Do not put anything between the blades of the fan when they are rotating. This would damage
the blades and cause the fan to sway because its balance is disturbed.
•After the fan is fully assembled, to prevent trouble, make sure that all connections on the
stand and blades are secure and tight.
•Due to the movement caused by the operation of the fan, connections may loosen. Check all
support links, brackets, and blade fixings twice a year to make sure that they are still secure.
Re-tighten any connections that have loosened.
•If the power cable is damaged, it must immediately be replaced by a qualified person.
•Danger: Do not try to repair the device yourself. Only a qualified specialist is allowed to carry
out repairs.
•Pull the power plug before touching the device.
•Only use the device for industrial purposes, not in the household.

https://www.naturewater.eu Item 63017, 63018 Page 4
The Tool Experts
11 2021-1
Main components
№
Name
№
Name
1
Interrupter
4
Motor
2
Blade
5
Wheels
3
Protective grid
Operation
This ventilator has three speed levels that allow to optimally adjust the air circulation.
Level
Meaning
0
Switched off
1
Switched on,
low speed
2
medium speed
3
high speed
Technical specifications
Item number
63017
63018
Intake voltage (V)
220–240
Frequency (㎐)
50
Power (W)
180
360
Diameter (㎝)
60
90

https://www.naturewater.eu Item 63017, 63018 Page 5
The Tool Experts
11 2021-1
Cleaning and maintenance
•Pull the plug before cleaning.
•Dust accumulated on the rear protective grille can be wiped off with a soft cloth.
•Occasionally wipe the outer surfaces of the fan clean with a damp, not dripping wet cloth.
Then dry it again with a dry cloth before switching the fan on again. Do not allow water to get
inside the fan.
•Do not clean the fan with caustic cleaning agents or sharp objects. These would damage it.
•Caution: Do not allow water to get inside the fan. There is a risk of fire and electric shock The
fan motor is lubricated in the factory and does not require any further lubrication. No other
maintenance work to be carried out by the user is required or recommended.
•Danger: Do not repair the fan yourself. This work must be done by qualified professionals.
Only original spare parts may be used.
Troubleshooting
Should the fan not work properly, please first go through the troubleshooting table before contacting
the customer service:
Problem
Possible cause
Proposed solution
Fan does not start.
Device not plugged in; required
power supply: 220–240 V
alternating current, 50 Hz,
polarized socket
Plug in plug, retry.
Breaker tripped or fuse blown
Check breaker and fuses in the
fuse box.
Plug in plug, retry.
Try on a different socket, too.
Fan switched on, airflow yet not
strong enough.
Dust accumulation on the back
of the device
Switch off fan, pull out plug.
Remove dust accumulation on
rear protective grille with a soft,
dry cloth. Plug in plug again,
switch on fan again.
Storage
•Clean the device according to steps 1 to 4 above. Disassemble the fan and clean the parts
before storage. Keep the device in its original packaging.
•Always store the device in a dry place.
•Do not store it with the plug plugged in.
•Never wrap the cable tightly around the fan and do not exert any other stress at the point
where the cable enters the device. The cable could tear or break.

https://www.naturewater.eu Item 63017, 63018 Page 6
The Tool Experts
11 2021-1
Regulations for waste disposal
The Waste Electrical and Electronic Equipment Directive (WEEE Directive, 2012/19/EU) of the EU
was implemented in the German law related to electrical and electronic equipment and appliances.
All WilTec electric devices that fall under the WEEE directive are labelled with the symbol of a
crossed-out wheeled rubbish bin. This symbol indicates that this electric device must not be disposed
of with the domestic waste.
WilTec Technik GmbH is registered with the German registration authority EAR (Stiftung Elektro-
Altgeräte Register) under the WEEE-registration number DE45283704.
Disposal of used electrical and electronic devices
(intended for use in the countries of the European
Union and other European countries with a separate
waste collection system for these devices).
The symbol on the packaging or the product itself
indicates that this product must not be treated as
normal domestic waste but must be disposed of at a
recycling collection station for electrical and electronic
waste.
By disposing of this product correctly, you contribute
to the protection of the environment and the health of
your fellow people. Inappropriate disposal threatens the environment and health.
Material recycling helps to reduce the consumption of raw materials.
Additional information about the recycling of this product can be provided by your local commune, the
municipal waste disposal facilities, or the store where you purchased the product.
Address:
WilTec Wildanger Technik GmbH
Königsbenden 12 / 28
52249 Eschweiler Germany
Important Note:
Reproduction and any commercial use (of parts) of this operating manual, requires a written
permission of WilTec Wildanger Technik GmbH.