XT DIGITAL VIDEO CAMERA User manual

1
USER MANUAL
DIGITAL VIDEO CAMERA

2
Preparing For Using
➢Part of the camcorder
1.Power button
2.Speaker
3.Shutter button
4.Reset
5.AV out jack
6.Menu button
7.Mode button
8.LCD screen
9.Charging indicator light
10.Busy indicator light
11.USB jack
12.Micro SD card slot
13.Cover
14.Lens
15.Up button

3
16.Down button
17.Tripod slot
18.Microphone
19. Water resistant case
➢Water resistant case
The part 19 is a water resistant TPU case, You can wear on it during
using. The case can keep your camcorder clean, and the most
important function is water resistant up to 15+ m (please maintain
the gasket always clean to prevent leakage)
➢Charging the battery
The camcorder has an internal lithium battery, Please charge fully
the battery prior to the first time use.
1.Turn off the camcorder.
2.Connect the camcorder to the computer through the USB cable to
for battery charging.

4
3.when charging ,the power indicator light will turn red, and when
the power indicator light turns off , it indicate charging full.
4.Unplug the USB cable.
The camcorder body may be warm after charging or extended use.
This is normal.
➢Inserting the Memory Card
This camcorder does not equipped with internal memory. A micro
SD card must be inserted for this sport camcorder to operate. If a
card has not been inserted，this sportive camcorder can not
record.
1.Turn off the camcorder.
2. Open the rubber cover at the side of the camcorder . Find the
micro SD card slot, and then insert the card.
If the memory card has successfully be inserted, you can hear a
sound buzzer.

5
➢Mounts (optional)
In order to use the camcorder more convenient in outdoor sports or
in under water situations, using some mounts fixed the camcorder
to make it. There are three kinds of mounts packaged in this the
camcorder.
abc
By installing these mounts, the camcorder can fix to bikes or
helmets. The operating steps as follow:
How to fix the sportive camcorder to the bike?
1: Open the round (1) of the mount(a) , insert the rubber pad into it
and fix them to handlebars of bike, then wring the arew to fix it.
2: Fix the metal screw of the mount to the tripod slot of the

6
camcorder respectively, and then wring the thread to fix the mount
3: After fixing it to the bike, you can start to take pictures.
How to use a strap fix to your helmet?
1: Insert a strap into the two ends of the mount (b or c), adjust the
length according to helmet’s size, and then you can use strap fix to
your helmet and start to take pictures.

7
➢How to use a sticker fix to your helmet?
1: Use the side of a sticker paste to the mount(b or c), and the
other side paste to your helmet , then start to take pictures.
TIPS: Do you remember the water resistant case? If necessary, you
can lock it with the sport camcorder, then fix them to a bike or a he
Capture mode
For taking still photos.
Video mode
For recording movie clips.

8
Audio mode
For recording audio files
Playback mode
For playing recorded files.
.

9
Basic Operation
➢Turn Power On and Off
1.Press the POWER button to turn on the camcorder.
2.Press the POWER button again to turn the power off.
➢Change the mode of the camcorder
Current camcorder settings will be displayed on the LCD screen.
The camcorder has 4 different modes : capture mode, video mode,
audio mode and playback mode. Press the MODE button repeatedly
to select between those modes.

10
MENU
FUNCTION
Beep
Sound setting:
Shutter :【On】/【Off】
Start-up:【None】/【1】/【2】/【3】
Beep :【On】/【Off】
Auto Review
set the displayed time after taking a image,
when choose “off”, it won’t show the recorded
image after taking .
1 Sec/2 Sec/off
Power
Frequency
Light Frequency should be setted depending
on your region:
50HZ/ 60HZ
Power save
To save power ,the video camera is turned off
automatically after a period of time . After you
select the "off " that means the power save
function is switched off
1min/ 3min /5min/off 
Timer&Date
set the date and time for the camcorder.
Language
Set the on-screen language:
English/French/Nederlands/espano
l/Italian/Portuguese/Deutsch
TV Out
You can review images on TV with the
supplied AV cable. TV Out should be set to
either NTSC or PAL depending on your region.
NTSC
PAL

11
USB
There are three functions when using USB
MSDC/PCCAM/Pictbridge
Start-up Image
Set on-screen image when turning on the
camcorder
off/system/ My image
Format
Format your micro SD card including protected
files , removing the SD card during formatting
may damage the card.
YES /NO
Reset All
Restores the camcorder to default settings:
YES /NO

12
➢Setting the camcorder
Before taking photographs or recoding videos and audios, press
the POWER button to switch on the camcorder first, Pressing the
MODE button after pressing the OK/MENU button to bring up the
setup menu as below, and press the SHUTTER button to ensure the
settings. At last, you can press the OK/MENU button again to exit
and return to the last menu .
➢Take a still image.
1.Turn on the camcorder and press the MODE button to set the
camera to capture mode .
2. Use the LCD screen to view your subject, press and hold the
UP/DOWN button to zoom in/zoom out on your subject . And then
press the SHUTTER button to take a still image.
3.After the image has been taken, the LCD will display the image
for a brief second.

13
4.The memory capacity in the top right of screen will decrease as
each image is taken.
➢Capture mode menu
MENU
FUNCTION
Resolution
Allow to change the image resolution for taking still
photos:
【5M】/【3M】/【1M】/【VGA】
Quality
Select a lower image quality to decrease the image
size in order to take more images. There are three
options for choice:
Super Fine/Fine/Normal

14
Metering
Change the metering method to change the
brightness of the picture:
Center/Multi/Spot
White
balance
Adjust the white balance to suit different light
sources. There five items for option:
Auto/Daylight/Cloudy/Fluorescent/T
ungsten
Exposure
Set the exposure value manually to compensate for
unusual lighting conditions ：
-2/-1.7/-1.3/-1/-0.7/-
0.3/0/+0.3/+0.7/+1/+1.3/+1.
7+2

15
Driver
Mode
Set the camera have a delay after pressing the
shutter button :
【Off】/【Self-timer 2S】/【Self-timer
10S】/【Burst】
Effect
Set the color effect to add a color tone to the video:
Normal/B&W/Sepia/Negative/Red/
Green/Blue
Date
Stamp
This function can be used to add a date to your files
as you take them
Date/off/Date&Time
➢

16
➢Recording Movie Clips
1.Turn on the camcorder and press the MODE button to set the
camera to video mode .
2. Use the LCD screen to view your subject, press and hold the
UP/DOWN button to zoom in/zoom out on your subject , Then
press the SHUTTER button to start recording.
3.The LCD monitor will displays how long it has been recording for
.
4.Press the SHUTTER button again to stop recording.
5.The camcorder will stop recording automatically when the
memory capacity is full.

17
➢Video mode menu
MENU
FUNCTION
Movie Size
Changing the video resolution for the
recording. Select small movie size to record
longer time.
【HD】/【640】/【320】
Frame Rate
Select low frame rate to record longer time.
There are two items for option:
【High】/ 【Low】
Metering
Refer to capture mode menu
White balance
Refer to capture mode menu
Effect
Refer to capture mode menu

18
Date Stamp
Refer to capture mode menu
➢Recording audio files
1.Turn on the camcorder and press the MODE button to set the
camera to audio mode .
2.Press the SHUTTER button to start to record audio files .
3.Don’t cover the microphone hole when recording audio files, or
else you won’t get the audio files you want to record for .
➢Playback mode
➢Playback recorded files
1.Turn on the camcorder and press the MODE button to set the
camera to playback mode .
2.Press the UP/DOWN button to view all the photos and video files
one by one .

19
3.When playing video files, you can press the SHUTTER button to
play the video file, then press the UP button to have a pause. Press
it again to replay again . and you can press the MENU button to
stop playing the video file.
4.When viewing the images, you will see a icon on the bottom
left of the screen .
5.When hearing the audio file , the icon will appear on the
screen. By pressing the UP button to have a pause , pressing it for
the second time it will play again , also you can press the MENU
button to stop hearing the audio file.
➢Playback mode menu
MENU
FUNCTION
Lock
【Lock/Unlock one】/【Lock All】/【Unlock All】

20
Delete
Use this function to delete a single file or all files.
【One】/【All】
Slide
Show
Use the function to set the option in the slide show.
【Start】:start play
【Interval】:press MODE button to set the intervals
between two images (up to 10 seconds).
【Repeat】:【YES 】/【NO】
Effect
Set the color effect to add a color tone to the file:
【B&W】/【Sepia】/【Negative】/【Red】/【Green】
/【Blue】/【Binarize】/【Sunset】/【Warm】/【Cold
】/【Contrast】
Rotate
【Rotate】:Press the SHUTTER button to rotate the
image, one time for 90°
【Save】: save this image .
【Back】: get back to the playback page.