XtendLan IPM-401W User manual

IPM-401W
User Manual

- 2 -
Table of Content
Product Overview............................................... 3
Features.............................................................................................. 3
Specification....................................................................................... 3
InterfaceDescription ......................................... 5
Front View ......................................................................................... 5
Rear View........................................................................................... 7
Setting up your device....................................... 9
Before we Start.................................................................................. 9
Hardware Connection....................................................................... 9
Software Installation......................................................................... 9
Web Interface.................................................... 19
Connect to your Device.................................................................. 19
WiFi Information............................................................................ 46
Load Factory Default & Restart System ...................................... 63
Controlling the Device..................................... 66
FAQ : ................................................................. 70

- 3 -
Product Overview
Features
1. Built in Web Server Design, directly control by web browser –PC & Smartphone :
Internet Explorer (IE) , Firefox , Google Chrome,
Safari ( iPhone ) and Android browser of smartphone
2. Support WiFi - Wireless 802.11 N/ B/ G and WPS connection
(WPA-PSK, WPA2-PSK, AES,128-bitWEP,64-bit WEP,TKIP, WPA2,WPA )
3. Support HTTPS , TCP/ IP , DHCP, DDNS, SNMP & SMTP
4. Control 4 individual outlet power ON & OFF .
5. Detect the consumed current of 4 individual outlet & show in LIVE line chart
6. Over Current protection and record Current Value history
7. Temperature detection - for Internal use only
8. Support USB Webcam( W/ UPNP, M-JPEG / YUV ) to view the area near IPM-401W.
9. With IR remote controller : control directly without need through PC web browser
10. Time scheduler : Multiple time setting for each outlet power ON , OFF or REBOOT
11. Auto Ping (Watchdog) capability to control external devices automatically
12. E-mail functionality for
13. notifying user - Support public e-mail --Google mail & Hotmail . .
14. Supply “Log “function to store device information and usage record
15. Fuse protection as power overloading ( total 10Amp)
16. Support Telnet , SNMP , and HTTP CGI command ( SDK) for system integration
17. CNT Technology –for quick and easy setup without port forwarding on Router , just plug
and play
18. IP Server: for quick search and easy access in Internet byname without thru DDNS.
Easily find on internet without remember the complicated IP address number
19. Option : RS232 control ( request by OEM /ODM only )
Specification
 Power input : 100V - 240V
 Maximum loading of each output: 9 amp
 Maximum of Total loading : 10 amp ( 220V) / 15amp ( 110V)
 Fuse protection : 10 amp ( with spare fuse in socket )
 Dimensions: 195 x 135 x 48 mm ( L x W x H )
 Weight: 1kg

- 4 -
Minimum System Requirements
WINDOS PC OS with network capacity.
Browser : IE 9.0 or above , Firefox, Google Chrome , Safari
RJ45 LAN & Internet HUB & Switch
JAVA version 1.60 or above to check USB Webcam under web browser Internet Explorer -IE
Internet ( for remote access) or Ethernet Network ( Internal Network use) with some type of
Internet connection, (i.e. ADSL, Cable, Dial up or any other forms of Internet service)
Package Contents
Package Contents
1. IPM-401W Unit x 1
2. IR Remote Power Control
3. IPM-401W Installation CD
3. WiFi Antenna
X 2 pcs
5. RJ45 Cable x 1 (option)
5.) Input Power Cable (option)
Please double check the power cable compatible
for 10 amp current loading .

- 5 -
InterfaceDescription
Front View
Power Status Indicator:
The Power Status Indicator - Green light ON
as power ON.
Reset :
There are 2 function for this button.
* Enable WPS function by one short click
There is one long beep as enable WPS
function. Please refer page #16 for details.
* Set back to default setting by long press
To reset to original manufacture settings, hold
down the reset button with a sharpen pin for
5- 6 seconds then release. There are THREE
beeps response ( short –- mid long –short )
which means reset successfully and
IPM-401W will be rebooted itself ( one beep
after reboot ) and most information go back to
default setting ( LAN IP )
Restart :
The restart button just resets the device by
turning off and then turning on the power.

- 6 -
Link:
The Link Indicator shows the WiFi signal
transfer status. The light will be ON all the time
and flashing while transfer data.
IR Receiver :
This area is for receiving the signal from
handheld IR remote controller which comes in
shippingpackage.
Network:
10/100 Mbps network
USB:
USB 2.0 for USB Web Camera. (With UPNP &
video format as M-JPG / YUV )
RS232 Serial Port Console :
Underconstruction

- 7 -
Rear View
Rear View
4 Output Power Ports:
Connect up to 4 separate devices
that will be controlled by the IPM-
401W. Ports 1 - 4
1 Input Power Port :
In this socket, there is power input
and Fuse socket .
 The input power sends power
to the IPM-401W.
 Fuse : To prevent electrical
surges from damaging the unit.
The IPM-401W comes with
one spare fuse in the unit.
TYPE：U/C GFE 10A 250V (PF)
1 Power Switch:
The Power switch turns on the
input power.

- 8 -
Fuse replacement
1.) The fuse is located between the power switch and the power input plugs.
2.) Carefully remove the fuse holder with a flat screwdriver.
3.) The fuse can be purchased from electronic shops.
Specification : U/C GFE 10A 250V (PF)

- 9 -
Setting up your device
Before we Start
*Before setting up the device make sure of the following:
1.) All the package contents are all included if anything is missing please contact the dealer
where the device was purchased from.
2.) Check the power input cable is working correctly.
3.) Check all cables to make sure there are no problems with it.
Hardware Connection
Please refer following procedure :
1.) Connect the Ethernet cable (RJ45) to the IPM-401W to your local area
network. 2.) Then connect the power cable into the power input port of the IPM-
401W.
3.) Connect the device that you would like to control to the output plug on the top of the IPM-
401W. 4.) Switching the power source to ON status , this switch is located at the rear of 9258.
5.) After power on for around 45 seconds , there is a short beep sound for IPM-401W which
means the system reboot successfully
5. ) Go to page #14 for software installation guide –use IP EDIT to log in the webpage of
IPM-401W.
Note: To change the network setting for WiFi connection ( if your Router without WPS function ) ,
please go to page # 12 to setup the WiFi connection manually .
Software Installation
The Media Link - IP Family CD comes with the device , it will have all the necessary software to
run and setup the device.
IP Power Software:
IP Edit (Required)
IP Power Center *( For multiple IP Power devices control )
Installing Software
1.) Place the Media Link-IP Family CD into the CD/DVD Rom drive.
(The CD should auto run but if it does not go to the CD/DVD Rom drive and select the
“autorun.html”file.)

- 10 -
2.) Click on the IP Power Section Bar
3.) Select the IP Power IPM-401W

- 11 -
4.) All the available downloads for the IPM-401W will be shown
5.) Download the required software –IPEdit.exe - by clicking on the download button.
Then you can select to connect IPM-401W by LAN or by WAN ( WPS)

- 12 -
Connection by WiFi- WPS ( WiFi Protection Service )
IP Power IPM-401W support WPS function which can assist user setup the WiFi connection of
user`s router and IP Power IPM-401W automatically . Before using WPS function, please check
your WiFi router and see if there has WPS function first . There should have a button name
“WPS / QCC “or a sign on the router for user to click easily.
Please refer following steps to setupWiFi –WPS connection
Step 1: Power on the IPM-401W - only connect power in but do not connect the LAN cable , you
will hear one short beep in 40 seconds means IPM-401W boot successfully
Step 2: Press the “WPS button”of your WiFi Router. ( Please check your router WPS function )
Step 3 : Press One time ( short) the “Reset button”of IPM-401W and then there is one long
beep which means the WPS function of IPM-401W enable .
Step 4: After few seconds , there are 2 beep : short Beep + middle beep
Whichmeans WPS connection successfully
( If WPS connection fail , there is one long beep mean the connection fail.
Please go back to step 2 and try again )
Step 5: Power to reboot IPM-401W . There is one short beep in 45 seconds which means
IPM-401W boot up successfully .

- 13 -
Step 6 : Execute IPEDIT.exe . There is WiFi IP address of IPM-401W shown in IPEDIT.exe
as following :
Step 7 : Double click the IP address and your PC will execute web browser like IE ,Firefox or
Google Chrome and there is wizard pop up to enquire the Username and Password .
Username : admin Password : 12345678
Step 8 : For the WiFi connection byWPS way , user can check here :
Network WiFi Info Profile list
To make this WiFi IP Address can be found on Internet, please arrange 2 settings as log in the
IPM-401W webpage:
1st : Please go to “Network Setting Default gateway Setting “and change as WiFi for the
Default gateway Setting .

- 14 -
2nd : Please do the port mapping / port forwarding in your router ( Need to check the router
manual ).
Connection byLAN –Network cable
User can also use LAN network cable to connect IPM-401W .
Please refer following steps to setup LAN connection
Step 1: Connect the LAN cable to IPM-401W .The LAN cable should be connected to a Router /
HUB + Router.
Step: 2 : Connect power cable to IPM-401W and Power on the IPM-401W .There is one short
beep in 45 seconds after IPM-401W power up .The short beep means IPM-401W boot up
successfully
Step 3 : After hear the one short beep , please execute IPEDIT.exe . There is IP address of
IPM-401W showed in the right side of IPEDIT.exe following :
Step 7 : Double click the IP address and your PC will execute web browser like IE ,Firefox or
Google Chrome and there is wizard pop up which inquire username and password .
Username : admin
Password : 12345678

- 15 -
About IPEDIT
IP Edit is a search tool designed to search, configure, or access the IP Power IPM-401W from a
local networked computer.
IP Power IPM-401W Default Login / Password
Default IP: 192.168.1.168 (When no DHCP is apparent)
Default Login: admin
Default Password:12345678
1.) In the local devices section you will see your device show up if connected correctly.
2.) Select the IPM-401W device and the device information will pop up on the right.
3.) Check to see that the gateway IP and the IP Address (IPM-401W) match your current
network. If not, type in the correct information, then hit the submit button to save changes.
For example:
If you have the following information regarding the IPM-401W and your network

- 16 -
Your PC Network :
Computer IP Address: 192.168.1.122
Gateway:192.168.1.1
Sub Net mask: 255.255.255.0
Port: 80
Your IPM-401W in IPEDIT :
IPM-401W IP Address: 192.168.100.34
Gateway:192.168.100.1
Sub Net mask: 255.255.0.0
Port: 80
Since the IP Address of the IPM-401W is : 192.168.100.34
You will need to make sure that the first 3 segments of your IPM-401W IP
Address must match the first 3 segments of your gateway IP.
First 3 Segment of Gateway Address: 192.168.1.X
So your new IP Address for the IPM-401W should be: 192.168.1.XXX
New Network Information
IPM-401W IP Address: 192.168.1.26
Gateway Address:192.168.1.1
Local Computer IP Address: 192.168.1.122
Sub Net mask: 255.255.255.0
Port: 80
4.) Press the rescan button to see if changes have been made.
5.) Double click on the device in the local device section and an IE web browser
with the device login will pop up.
6.) Type in the default Login and IP Address to enter the device.
Default Login : admin
Default : 12345678
Notice :
* User can click " REF " in IEPDIT to auto search proper IP setting for IPM-
401W. It will take few minutes to show the suggest wizard.

- 17 -
Please click APPLY as seeing the suggest wizard , click " yes " to ignore the remind
message of IP being used and then type the username and password to change the IP setting.
Username : admin
Password : 12345678
Internet Setup
To connect the IP Power IPM-401W on Internet, there are two ways
 Setup Port Mapping / Port Forwarding in your router. Please check your Router owner‟s
manual .
 Use software “IP Power Center “: Please refer to owner‟s manual in CD of IPM-401W .
Using IP Server
IP Server is a function which allows you to search for the device easily without having to
remember long complicated IP address. Instead, if you know the device‟s name of your IP
Power device and you can easily find IP Address with IP Service.
In the IP IPM-401W under the system configuration page, you can select the IP Server that
you would like the IPM-401W to go for . You can select from the server or the Cloud Server.
This function must be turned on to work.
* IP Power IPM-401W must be port forwarded for IP Server to work correctly.

- 18 -
1.) Open IP Edit and select the server that your IPM-401W is designated to.
2.) Hit the Green Connect button on the top of IPEdit.
3.) Then type in the IPM-401W Name that you have selected for the device and press the
Search button.
4.) Find your device and double click on the screen and a IE window will pop up connecting to
your device. *Your device must be Port Forwarded for the login screen to appear.

- 19 -
5.) After you have connected to your device, type in the Login and Password for your device
Web Interface
Connect to your Device
Once the IPM-401W has been setup correctly, log into the device.
First Option
1.) Go to IP EDIT find the device that is being used
2.) Double click on the device linked and an IE window will appear with the loading screen
Second Option
1.) Open Internet Explorer type in the IP Address of the device followed by the : sign.
For example: http:192.168.122.188:9258
192.168.122.188 –IP Address
9258 –Port
2.) Once you have typed in the IP address of the IPM-401W and it is ready to use.

- 20 -
The default password for the IPM-401W
Username : admin
Password: 12345678
The Control Console
The Right Panel of the Web Interface controls the functionality and setup of the IP Power IPM-
401W.