XTS PCAM3000 User manual

1. Turning On the Camera
In powered off status, long press for 3 seconds, after a beep, the
camera will be turned on and automatically go to preview mode.
Meanwhile, the status light will turn green. In preview mode, the following
screen will appear:
2. Turning Off the Camera
In preview mode, long press for 3 seconds, after two beeps, the
camera will save current data and will be turned off. Meanwhile, the status
light will go off.
3. Taking a Photo
In preview mode, press to take a photo; long press to take
more than one photos continuously (Burst shooting). There is a crack
every time a photo is taken, and the photo will be automatically saved in
JPG format.
4. Shooting a Video
In preview mode, press , after a beep, this camera will start shooting.
Meanwhile, the status light will turn red. Press again, after two beeps,
this camera will stop shooting, and the video will be automatically saved in
MP4 format

5. One Touch Shooting
In powered off status, long press after a beep, this camera will be
turned on and start shooting. Meanwhile, the status light will turn red.
Press again, after two beeps, this camera will stop shooting, and the
video will be automatically saved in MP4 format.
6. Audio Recording
In preview mode, press , after a beep, this camera will start recording
sound. Meanwhile, the status light will turn yellow.
Press again, after two beeps, this camera will stop recording, and the
audio will be automatically saved in WAV format.
7. IR Mode
In preview mode or during shooting a video, long press to switch to
IR mode. Long press again to exit from IR mode.
8. Playback
In preview mode, press and select video/photo/audio on the following
screen.
9. Turning Off the Screen
In preview mode or during video recording, press to turn off LCD
screen, meanwhile, this camera will go to sleep mode. Press any button to
wake LCD screen so that this camera will exit from sleep mode.