Yamaha FZ6-N 2004 User manual

FOREWORD
This Supplementary Service Manual has been prepared to introduce new service and data for the
FZ6-N(S)2004.ForcompleteserviceinformationproceduresitisnecessarytousethisSupplementa-
ry Service Manual together with the following manual.
FZ6-S(S) 2004 SERVICE MANUAL: 5VX1-AE1
FZ6-N(S) 2004
SUPPLEMENTARY
SERVICE MANUAL
E2003 by Yamaha Motor Co., Ltd.
First Edition, December 2003
All rights reserved.
Any reproduction or unauthorized use
without the written permission of
Yamaha Motor Co., Ltd.
is expressly prohibited.

NOTE:
WARNING
CAUTION:
EAS00002 NOTICE
This manual was produced by the Yamaha Motor Company, Ltd. primarily for use by Yamaha dealers
andtheirqualifiedmechanics.Itisnotpossibletoincludealltheknowledgeofamechanicinonemanu-
al. Therefore, anyone who uses this book to perform maintenance and repairs on Yamaha vehicles
shouldhaveabasic understanding of mechanics and the techniquestorepairthese types of vehicles.
Repair and maintenance work attempted by anyone without this knowledge is likely to render the ve-
hicle unsafe and unfit for use.
YamahaMotorCompany, Ltd. is continually striving to improve all ofitsmodels.Modificationsandsig-
nificant changes in specifications or procedures will be forwarded to all authorized Yamaha dealers
and will appear in future editions of this manual where applicable.
Designs and specifications are subject to change without notice.
EAS00004
IMPORTANT MANUAL INFORMATION
Particularly important information is distinguished in this manual by the following.
The Safety Alert Symbol means ATTENTION! BECOME ALERT! YOUR
SAFETY IS INVOLVED!
FailuretofollowWARNINGinstructionscouldresultin severe injuryordeathto
themotorcycleoperator, a bystander orapersoncheckingorrepairingthemo-
torcycle.
ACAUTIONindicates special precautions that must betakento avoid damage
to the motorcycle.
NOTE: A NOTE provides key information to make procedures easier or clearer.

12
4
8
3
5
6
7
EAS00007
HOW TO USE THIS MANUAL
This manual is intended as a handy, easy-to-read reference book for the mechanic. Comprehensive
explanations of all installation, removal, disassembly, assembly, repair and check procedures are laid
out with the individual steps in sequential order.
1The manual is divided into chapters. An abbreviation and symbol in the upper right corner of each
page indicate the current chapter.
Refer to “SYMBOLS”.
2Each chapter is divided into sections. The current section title is shown at the top of each page,
exceptin Chapter 3 (“PERIODIC CHECKS AND ADJUSTMENTS”),where the sub-sectiontitle(s) ap-
pears.
3Sub-section titles appear in smaller print than the section title.
4To help identify parts and clarify procedure steps, there are exploded diagrams at the start of each
removal and disassembly section.
5Numbers are given in the order of the jobs in the exploded diagram. A circled number indicates a
disassembly step.
6Symbols indicate parts to be lubricated or replaced.
Refer to “SYMBOLS”.
7A job instruction chart accompanies the exploded diagram, providing the order of jobs, names of
parts, notes in jobs, etc.
8Jobs requiring more information (such as special tools and technical data) are described sequen-
tially.