Yeelight LED J1 Clip Lamp User manual

Yeelight LED J1 Clip Lamp User Manual

15 LED Lights
Touch the surface
to switch between
3 level ofbrightness
Charging LED light indicator
Micro- Usb
Charging port
360 degree flexible
body adjustment
and rotation
Products Details

Installation Guide
1. Insert the USB cable into the product to charge it.
2. When it is charging via a power plug, light will be reflected to show it is charging.
No light shows that the product has been fully charged.
3. Ensure that the power plug is at DC 5V. Charging using a USB from desktop / laptop
whilst switching on the light will cause a longer charging time.
* Please do not use power plug above
DC 5V. Please strictly follow the steps
in the installation manual.
Improper usage may cause accidents
such as fires, and electric shock.
“Red” means it is charging
“No” lights means the battery
is full and not charging
Plug in using the micro usb cable provided.
“ Charger is not provied ”
Micro usb port

Touch Control Switch Instructions
Do note and make sure that your hand is not wet during the touch operation of the
switches on the surface of the lamp as it will reduce the sensitivity and affect the user
experiences.
The lamp has 3 levels of brightness, Low, Mid, High. To turn on the lamp, tap the circle
icons once.
To turn off the lamp, slight touch the circle icons to cycle through the lights before it is
turned off.
Turn on / off / level of brightness

Names and Content of Hazardous Substances in Product
Safety Instructions
This table is createdaccording toSJ/T 11364 standard.
Component name
Hazardous substance
Lamp Shade
LED lighting
Lamp holder
Plastic parts
Metal housing
Circuit board
1. Before use, please make sure that your voltage is appropriate to the product's working
voltage. Using the product at a voltage other than the specified one may damage the
product and create safety hazards;
2. The LED module cannot be replaced. Do not disassemble the product without proper
authorization;
Lead (Pb) Mercury
(Hg)
Cadmium
(Cd)
Hexavalent
chromium
(Cr(VI))
Polybrominated
biphenyls
(PBB)
Polybrominated
diphenyl ethers
(PBDE)
Indicates that the hazardous substance contained in all homogeneous materials
of this component is within the limit of the GB/T 26572 standard.
Indicates that the hazardous substance contained in a certain homogeneous
material of this component exceeds the GB/T 26572 standard.

Please read this manual carefully before using the product
For asia Yeelight after-sales services website: www.yeelight.asia
Or email us [email protected] for more information regarding the after-sales services
Standard Compliance: Q/QDYLK0001-2016
Manufacturer: Qingdao Yeelink Information Technology Co., Ltd.
Address: B4, Floor 10, Tower B,International Innovation Park, #1 First Keyuanwei Rd.,
Laoshan District, Qingdao City
Basic Parameters
Product Model: YLTD10YL
Color Temperature Range: 3900K
Operating Temperature: -10°C to +40°C
Operating Humidity: 0% to 85% RH
Service Life: Approx. 25,000 hours
Power Factor: 1.0A
Rated Power: 5W
Rated Input: 5v