Yeti hopper User manual

HOPPER™
OWNER’S MANUAL

Congratulations! You now own a
YETI®Hopper™- the world’s best
(don’t call it soft) portable cooler.
Durable design and construction assure
you a lifetime of extreme performance.

4
FEATURES AS TOUGH AS
COOLERS THEMSELVES
DryHide™ Interior and Exterior
The YETI® Hopper uses wildly stronger DryHide™ fabric for both
the interior and exterior shells. This specially calibrated material
is high tenacity 840 denier nylon with a double TPU coating –
similar to material used in high-performance whitewater rafts. It is
waterproof and resistant to puncture, abrasion, and UV-rays. The
liner is anti-microbial, mildew resistant, and FDA food-grade.
ColdCell™ Insulation
The deep and lasting chill of the Hopper™ can be credited to its
premium ColdCell™ Insulation. This closed-cell NBR rubber foam
is 1” thick on the sides and 1.5” thick on the bottom, oering far
superior cold holding to ordinary soft coolers.
HydroLok™ Zipper
Go ahead: turn it upside down and give it a shake. The
Hopper™ won’t leak! The HydroLok™ Zipper is the ultimate
waterproof, airtight closure. Constructed like zippers found in
survival suits, fishing waders, and HazMat protective gear, you
can trust this zipper to perform in any environment in the wild.
See page 6 for care instructions.
U-Dock™
The U-Dock™ is the terminal end of the HydroLok™ Zipper
that insures a leak-proof seal when closed. To maximize
ice retention and eliminate leakage, pull the slider until it
is fully engaged in the U-Dock™. To drain water from the
Hopper™ without spilling your contents, leave the slider
just short of the U-Dock™ and invert the cooler.
Welded Seam
Construction
RF-welded seams
eliminate stitching,
providing water-
proof construc-
tion and superior
durability.
EVA Foam
Bottom
The heavy-duty
EVA Foam Bottom
adds stability and
additional abrasion
resistance.

EVA Foam
Bottom
The heavy-duty
EVA Foam Bottom
adds stability and
additional abrasion
resistance.
D-Ring Tie-Down Points
The Hopper™ is equipped with six reinforced D-Ring Tie-Down
Points, on all sides of the cooler. Use these to secure your
Hopper™ to your kayak, ATV, ski, SUP, Radio Flyer, etc.
HitchPoint™ Grid
Accessorize your Hopper™ with the flexibility of the HitchPoint™
Grid. Easily fasten bottle openers, carabiners, key chains, or
accessories such as the YETI SideKick™ Gear Case through
the nylon strapping.
SideKick™ Gear Case (sold separately)
Add storage capacity to the Hopper™ Cooler with the SideKick™
Gear Case. Koozies, wallets, keys, and much more fit into this
handy accessory pouch. The SideKick™ conveniently mounts to
the HitchPoint™ Grid with Velcro strapping.
THREE CARRY OPTIONS
5
1 PRIMARY HANDLES
The primary carry handles
are reinforced at the point of
attachment and double-stitched to
bear the heaviest of loads.
2 END HANDLES
Double-stitched reinforced end
handles serve as both lift points and
zipper pulling anchors.
3 SHOULDER STRAP
The detachable shoulder strap is
designed to make carrying heavy
loads over long distances
more comfortable.
HOPPER™ 30

Breaking in your Hopper™
Like a good pair of boots or a quality baseball glove, the Hopper™ takes a little time to break in.
The extremely durable materials of the Hopper™ can make it feel rigid when first put into action.
Loading and unloading contents will become easier as the materials relax with use.
Caring for the HydroLok™ Zipper
The HydroLok™ Zipper is the best cooler zipper in the world, and with a little care and
maintenance can last a lifetime. As noted below, we recommend long term storage with the
zipper in the fully closed position to help protect the U-Dock™ seal. We also recommend regular
application of the included zipper lubricant – especially when putting into storage – by carefully
applying the lube to the U-Dock™ front, back, and inside.
Draining and drying
To drain water from the Hopper™ without spilling your contents, leave the HydroLok™ Zipper
slider just short of the U-Dock™ and invert the cooler.
Everyday cleaning
When your cooler gets a little muddy or grimy, a mixture of dish soap and water should do the
trick. Rinse with fresh water, then thoroughly wipe the inside dry with a cloth or paper towel.
Leave the HydroLok™ Zipper open for several days to ensure all moisture has dried.
Do Not Machine Wash. Do Not Dry in an Oven.
Storage
Make sure your cooler is completely free of moisture. It is recommended that you leave the
HydroLok™ Zipper in the closed position – with the slider fully pulled into the U-Dock™.
This will help protect the waterproof seal and the U-Dock™.
UV Exposure
You may find colors of the Hopper™ fading over time. This is a normal part of the wearing
process and will not aect performance in any way. Like your favorite YETI hat, color-fading
adds a little character.
USAGE, CLEANING, & CARE
6

Hopper™ 30 22½ 12½ 16½
Hopper™ 40 24 13 18¼
Hopper™ 20 21½ 10½ 13¾ 4.6 18
L W H
*Using the recommended 2:1 ratio of ice to contents
6.5 24
10 36
Gal Cans*
DIMENSIONS & CAPACITY
All YETI® Hopper™ Coolers are warrantied against defects in material and workmanship for
3 years after original purchase. This warranty applies only to the original owner. This warranty is
void if the cooler is used commercially, structurally altered, damaged as a result of abnormal use
or subjected to stress beyond the physical limits of the materials used in body or components.
Normal wear and tear is not warrantied. This warranty does not include any manufacturer
responsibility for any incidental or consequential damages resulting from the use of the cooler.
If the warranty applies, YETI® Coolers will repair or replace, at its discretion, the cooler or any part
or component that is deemed defective. YETI® Coolers reserves the right to change products and
designs without incurring any obligations to incorporate such changes into already completed
products, or those in the hands of dealers or consumers. Coolers repaired or replaced under this
warranty may or may not incorporate these changes.
Damaged products must be returned directly to YETI® Coolers, in original box or adequate
cardboard packaging, freight prepaid. To obtain an RMA (Return Materials Authorization) number,
contact the YETI Outfitter team at [e-mail] Please include a copy of
original sales receipt and the RMA number with the returned product.
To register your YETI® Cooler and activate your warranty visit yeticoolers.com or contact the
YETI Outfitter Team at 512.394.9384.
We stand behind every cooler we make. If any part of your
YETI®malfunctions or breaks, simply contact us for prompt
repair or replacement. Don’t worry, it’s a YETI®!
3 YEAR WARRANTY
7
L
W
H

PRO TIP:
MAXIMIZING ICE RETENTION
A YETI® Hopper™ Cooler, with its welded DryHide™ double-TPU coated construction, thick
ColdCell™ insulation, and waterproof HydroLock™ Zipper provides remarkable insulating
performance and ice retention capabilities.
To get the most from your YETI’s insulating qualities, we strongly recommend you read the
concepts outlined below. These techniques are used by seasoned outdoor professionals
who rely on extended ice retention.
Start with a cool YETI®Cooler
A cooler is designed to insulate, which
means it will retain heat as well as cold.
For this reason, try to store your cooler
in a cool environment prior to loading
it with ice. If stored in direct sunlight, a
warm garage, or a hot vehicle prior to use,
a significant amount of ice will be wasted
cooling the cooler itself. One way to cool
the walls is to pre-load it with a sacrificial
bag of ice. The starting temperature of
the cooler is one of the most commonly
overlooked variables in ice retention.
Dry Ice is the frozen form of Carbon Dioxide and its -109° F temperature makes a very attractive
cooling alternative to regular ice. Although the Hopper’s DryHide™ body construction is more
than capable of withstanding that extreme temperature, we still recommend against using Dry
Ice in the Hopper™.
Here’s why: instead of melting, dry ice sublimates into CO2gas as it warms. The Hopper, and
most notably the HydroLock™ Zipper, is so airtight that when fully closed, there is no way for
this gas to escape. The cooler will inflate until it bursts. Don’t try that at home!
Freeze or pre-chill contents
Chilling or even freezing the contents
you intend to load into your cooler is another
way to extend ice retention. Consider that it
will take over 1 lb. of ice to cool a six-pack of
room temperature beverage cans.
More ice is better
We recommend filling your cooler with as
much ice as possible. Ideally, we suggest an
ice-to-contents ratio of 2:1.
AVOID DRY ICE
Not all ice is created equal
Ice can get much colder than its freezing point. “Warm” ice (near 32°F) is typically wet to
the touch and dripping with water. Cold, sub-zero ice is relatively dry and will last
substantially longer.
32o 21o 0o
WELL CURED ICE WARM WET ICE FREEZING POINT
oF
8

Don’t drain the water
Once your cooler is in use, we recommend
you avoid draining the cold water, if possible.
The water in your cooler will be almost
as cold as the ice and will help insulate
the remaining ice. However, it is advisable
to keep exposed food and meat out of
the water.
Air is the enemy
Large pockets of air inside your cooler
will accelerate ice melt since a portion
of the ice is consumed cooling the air.
Air space voids are best filled with extra
ice. Alternatively, do like the pros and
squeeze out the excess air to remove
these air pockets.
Applying the tips and techniques provided in this Owner’s Manual is the
key to achieving maximum ice retention with your YETI®. Due to all of the
variables that aect ice retention, and because every adventure is dierent,
we believe it is misleading to make specific claims about how long a cooler
will hold ice.
Sunlight is a heat source
When possible, keep your cooler out of
direct sunlight. Ice will last substantially
longer when the cooler is in the shade.
Some pros use towels or tarps to cover
their coolers when they cannot find a
shaded spot.
Block ice vs. cube ice
The advantage of block ice is that it will
melt much more slowly than cubed or
shaved ice. Smaller pieces of ice will chill
a cooler and its contents more quickly
but will not last as long. In fact, fishermen
often use shaved ice to quickly chill their
catch. Most pros use a mixture of cube and
block ice for the dual purposes of rapidly
chilling contents and achieving long-term
ice retention.
9
If you are looking to super-chill your beverages, here is a pro tip that can make the
dierence:Rock Salt. This will produce some of the coldest drinks you have ever had…
and in a relatively short period of time. Here’s how to do it:
1. Properly fill your YETI® Hopper with beer and plenty of ice
2. Generously sprinkle rock salt on top of ice and zip it closed
3. Wait 30 minutes, then enjoy frigid awesomeness
You can find this and many more Pro Tips and Tricks
videos at yeticoolers.com
USING ROCK SALT
PRO TIP:
WARNING:Once you master this technique, you may not want
to drink beer any other way.
Limit cooler access
Frequent unzipping and opening will accelerate ice melt. Every time you open your
cooler, you are letting cold air escape. Limit cooler access and the time the cooler is open,
especially when it is very warm outside. In extreme cases, professionals limit their cooler
access to a few times per day.

YETI Coolers™Hats and Visors
Because wearing a cooler on your head is ridiculous.
YETI® Coolers
We make the world’s best hard coolers, too.
YETI Coolers™ Apparel
Rugged yet remarkably comfortable. Available in a variety of styles and colors.
GEAR
Shop the entire collection of gear and accessories at
yeticoolers.com
10
YETI Coolers™Drinkware
The ultimate survival tools for keeping you hydrated in the field or on the water.

As a YETI® Cooler owner, you are now a part of the incredible group
of YETI® owners and fans that make up the YETI® Nation.
Be sure to follow us on Facebook, Twitter, Instagram, YouTube,
Vimeo, and our website to join the conversation. This is a great way
to exchange images and stories with other YETI® fans.
Plus, every month there are opportunities to win free YETI® Coolers,
Gear, and Accessories.
NATION
11
FOLLOW

BREAKING-IN YOUR HOPPER™
YETI Coolers, LLC P.O. Box 163686, Austin, TX 78716-3686
Phone [phone] [e-mail] www.yeticoolers.com
Rate, Review, and Register
your Hopper™ at yeticoolers.com
Like a good pair of boots or a quality baseball
glove, the Hopper™ takes a little time to break in.
The extremely durable materials of the Hopper can
make it feel rigid when first put in action. Loading
and unloading contents will become easier as the
materials relax with use.