YIC Technologies EMViewer NFP Kit User manual

www.yictechnologies.com
V
EMViewer
NFP Kit - Live Tracking Setup Guide
022022
Disclaimer
Warranty
The material contained in this user manual is provided “as is” and is subject to being changed,
without notice, in future editions. Further to the maximum extent permitted by applicable law,
YIC Technologies disclaims all warranties, either expressed or implied, with regard to this user
manual and any information contained herein, including but not limited to the implied
warranties of merchantability and fitness for a particular purpose. YIC Technologies shall not
be liable for errors or for incidental or consequential damages in connection with the furnishing,
use, or performance of this document or any information contained herein. Should YIC
Technologies and the user have a separate written agreement with warranty terms covering
the material in this document that conflict with these terms, the warranty terms in the separate
agreement shall control.

www.yictechnologies.com
Safety Notices
Caution
A CAUTION notice denotes a hazard. It calls attention to operating procedure, practice, or
the like that, if not correctly performed or adhered to, could result in damage to the product
or loss of important data. Do not proceed beyond a CAUTION notice until the indicated
conditions are fully understood and met.
Warning
A WARNING notice denotes a hazard. It calls attention to an operating procedure, practice,
or the like that, if not correctly performed or adhered to, could result in personal injury or
death. Do not proceed beyond a WARNING notice until the indicated conditions are fully
understood and met.
of Contents
Support
Components and Connection Overview
Components Supplied with the NFP Kit
1 Handheld
Probe Set
 Handheld Probes Handle
 NFPE10A Full Range E Field Probe
 NFPH10A 10MHz-350MHz H Field
Probe
 NFPH20A 300MHz-3.5GHz H Field
Probe
 NFPH30A 3GHz-18GHz H Field Probe
2 Camera USB Mini Camera, 5MP, 5-50mm
Varifocal Lens, 10X Optical Zoom
3 Support Arm 11 Inch Adjustable Support Arm with
Clamp
Required Components (Supplied by user)
1. Spectrum Analyser: It must include the necessary options to work with EMViewer (see
Supported Spectrum Analysers).
2. PC: Including a LAN or USB 2.0/3.0 port for the spectrum analyser and a USB port for
the webcam. It must be running Windows.

www.yictechnologies.com
Installation and Hardware Setup
1. Install latest version of Keysight IO
Click here to open the website to download the latest version. On the website click on
the Download button and follow the steps.
2. Install the EMViewer Primum application
Install the EMScanner software by clicking on the Setup application icon. The
application must always be installed on the C: drive.
The EMViewer software can be purchased at www.yictechnologies.com
3. Verify that your camera works correctly.
Windows has a built-in camera application you can use for this. Type Camera in the
Windows search box.
4. Connect PC, spectrum analyser and probe as per the diagram below.
If you are using Ethernet between the PC and the spectrum analyser, use a
crossover Ethernet cable. If the spectrum analyser has multiple trigger ports, always
connect to Trigger 1 IN.
Connection
Diagram

www.yictechnologies.com
Taking Measurements
The EMViewer software analyse the camera video stream and identify the probe type,
position and its orientation based on the marker printed on the tip. For best performance,
keep this marker visible to the camera.
Correction can be turned on/off from the
Open the EMViewer and add new node to the project.
Click to Add Handheld Probe node:
In the Setting Dialog Box, check the `Probe Camera Tracking` check box:
Selected the desired Camera and click OK:

www.yictechnologies.com
Live Tracking is now active.
Technical Support
To help us provide fast and seamless technical support, kindly gather the
following information, and contact Technical Support as instructed further
below:
1. Make and serial number of your probe.
2. EMViewer software version
3. Windows OS information
4. Keysight IO version
5. Spectrum analyser model and firmware level
6. Information View data saved as a text file
7. Description of the problem including screen shots and videos
www.yictechnologies.com
[email protected]