YoloLIV VertiCam User manual

YoloLiv VertiCam PTZ Camera
User Manual
English (V1.0)

Copyright
All contents of this manual, whose copyright belongs to our corporation, cannot be cloned, copied or
translated without the permission of our corporation.
Notice
Product specifications and information which were referred to in this document are for reference only. We
may change, delete, or update any content at any time and without prior notice.
FCC NOTICE (Class A)
This device complies with Part 15 of the FCC Rules. The operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
●Reorient or relocate the receiving antenna.
●Increase the separation between the equipment and receiver.
●Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
●Consult the dealer or an experienced radio/television technician for help.
Class A ITE
Class A ITE is a category of all other ITE which satisfies the class A ITE limits but not the class B ITE limits.
Such equipment should not be restricted in its sale but the following warning shall be included in the
instructions for use:
Operating this equipment in a residential environment may cause radio interference.
European Community Compliance Statement (Class A)
This product is herewith confirmed to comply with the requirements set out in the
Council Directives on the Approximation of the laws of the Member States relating to
Electromagnetic Compatibility Directive 2014/30/EU.

USB HD Video Conference Camera User Manual
1Safety Precautions
●During the installation and operation, all
electrical safety regulations of the country
and region of use must be strictly observed.
●Please use the power adapter that comes
standard with this product.
●Do not connect multiple devices to the same
power adapter (exceeding capacity of the
adapter may generate excessive heat or
cause fire).
●Do not rotate the camera by hand, otherwise
it may cause mechanical failure.
●When installing this product on a wall or
ceiling, make sure the device securely and
there are no obstacles within the rotation
range; Do not power on until all installations
are completed.
●To avoid heat build-up, please keep smooth
ventilation around the device.
●If the device smokes, smells, or makes noises,
please turn off the power and unplug the
power cord immediately, then contact the
dealer in time.
●This device is not waterproof, please keep the
device dry.
●This product has no user serviceable parts,
damage caused by disassembly by the user is
not covered by the warranty.
Specific frequencies of electromagnetic field may
affect the image of the camera!
2Packing List
Name
Quantity
Camera
1
Power Adapter
1
Remote Control
1
USB Cable
1
User Manual
1
3Quick Start
1) Please check connections are correct before starting.
1

USB HD Video Conference Camera User Manual
1) Connect the power adapter to the power
connector on the rear panel of camera. The
power indicator on the front panel of the
camera turns on.
2) Aer the camera is powered on, it starts to
initialize, right up to the limit position, and
then both horizontal and vertical go to the
middle position. When the motor stops
running, it indicates the initialization is
completed.
4About Product
4.1 Features
●Full Function USB Interface
Full function USB interface, compatible with
USB3.0 and USB2.0, support UVC v1.1 and UAC
1.0 protocol, support video raw image and
encoding output.
●1080P Full HD
The new 1/2.8-inch high-quality HD CMOS sensor
with 2.07 million effective pixels enables
high-quality images up to 1920x1080. Output
frame rate is up to 60 frames/s to present clear
and realistic HD video, vividly showing the
expression and action of the characters.
●72.5° Wide-angle Lens
The exclusively customized 72.5° high-quality
ultra-wide angle lens with optical zoom up to 12x.
●Low Illumination
The new CMOS image sensor with ultra-high SNR
can effectively reduce the image noise under low
illumination. The application of 2D and 3D noise
reduction algorithm greatly reduces the image
noise even under the condition of ultra-low
illumination, it keeps the picture clean and clear,
and the SNR of image is as high as 55dB.
●Remote Control
The camera can be controlled remotely through
the RS232 and USB port.
●Leading Auto Focus Technology
Using the advanced focusing algorithm and TOF
module assists focusing, lens can focus quickly,
accurately and stably.
●Multiple & Complete Interfaces
Support audio and video output via HDMI
(optional) and USB 3.0 interface.
●Portrait
Support portrait output.
●Easy to Use
No need to download the driver, plug and play
USB output to take a convenient and simple user
experience.
4.2 Product Specification
Camera
Video System
1080P60, 1080P50,
1080P30, 1080P25, 720P60,
720P50
Sensor
1/2.8-inch, CMOS,
Effective Pixel: 2.07M
Scanning Mode
Progressive
Lens
12x, f=3.5mm ~ 42.3mm,
F1.8 ~ F2.8
Digital Zoom
16x
Minimum
Illumination
0.5 Lux @ (F1.8, AGC ON)
Shutter
1/30s ~ 1/10000s
White Balance
Auto, Indoor, Outdoor,
One Push, Manual, VAR
Backlight
Compensation
Support
Digital Noise
Reduction
2D&3D Digital Noise
Reduction
SNR
≥55dB
Horizontal FOV
72.5° ~ 6.9°
Vertical FOV
44.8° ~ 3.9°
Pan Angle
±170°
Tilt Angle
-25° ~ +30°
Pan Speed
1.61° ~ 75.56°/s
Tilt Speed
0.44° ~ 15°/s
Image Flip
Support
Image Freeze
Support
Preset Position
255
Preset Accuracy
0.1°
2

USB HD Video Conference Camera User Manual
MIC Pick-up
Distance
6m
USB Features
Operate System
Windows 7, Windows 8,
Windows 10, Mac OS X,
Linux, Android
Color System/
Compression
MJPG/YUY2
Video Format
●YUY2 (ISOC):
1080P@60fps (max.)
●MJPEG: 1080P@60fps
(max.)
USB Audio
Support
USB Video
Communication
Protocol
UVC 1.1
UVC PTZ
Support
Interfaces
USB Interface
1 x USB3.0: Type-B
HDMI Interface
1 x HDMI 1.4b
Audio Interface
1 x LINE IN, 3.5mm
Communication
Interface
1 x RS232 IN: 8pin min DIN;
Max. Distance: 30m;
Protocol: VISCA/Pelco-D/
Pelco-P
1 x RS232 OUT: 8pin min
DIN; Max. Distance: 30m;
Protocol: VISCA network
use only
Power Jack
JEITA type (DC IN 12V)
General Specifications
Input Voltage
DC 12V
Input Current
1.5A (max.)
Operating
Temperature
-10°C ~ 40°C
Storage
Temperature
-40°C ~ 60°C
Power
Consumption
12W (max.)
Dimension
128mm x 118mm x
157.9mm
Net Weight
1.0Kg
4.3 Interfaces and Buttons
Item
Name
1
USB3.0 Interface
2
HDMI Interface
3
LINE IN Interface
RS232 IN Interface
RS232 OUT Interface
DC 12V Interface
3

USB HD Video Conference Camera User Manual
4.4 Dimension
4

USB HD Video Conference Camera User Manual
4.5 Installation
The installation diagram is for reference only. The brackets and screws are not standard. For
packing accessories, please refer to the actual product.
5

USB HD Video Conference Camera User Manual
4.6 Remote Control
Key Description
1. (Standby) Key
Press to enter standby mode
2. Number Key
To set preset or call preset
3. * Key
Use with other keys
4. PRESET Key
Set preset: [PRESET] + Number key (0-9)
5. HOME Key
Confirm selection or press to turn PTZ back to the
middle position
6. (Return) Key
Press to return to the previous menu
7. ZOOM Key
●SLOW: Zoom In [+] or Zoom Out [-] slowly
●FAST: Zoom In [+] or Zoom Out [-] fast
8. L/R SET Key
●Standard: Simultaneously press L/R SET + 1
●Reverse: Simultaneously press L/R SET + 2
9. FOCUS Key
Auto/Manual/Far/Near focus
10. CAMERA SELECT Key
Press to select and control the camera
11. # Key
Use with other keys
12. IR Remote Control Key
[*] + [#] + [F1]: Address 1
[*] + [#] + [F2]: Address 2
[*] + [#] + [F3]: Address 3
[*] + [#] + [F4]: Address 4
13. RESET Key
Clear the preset position: [RESET] + Number key
(0-9)
14. PTZ Control Key
PTZ moved according to the arrow indicates
15. MENU Key
Enter or exit OSD MENU
16. BACKLIGHT Key
Backlight ON/OFF: Press repeatedly to enable or
disable the backlight compensation.
NOTE:
●Effective only in auto exposure mode.
●If there is a light behind the subject, the
subject will become dark, press the backlight
key to enable the backlight compensation.
Press again to disable this function.
17. P/T RST (PTZ Reset) Key
Press to preset Pan/Tilt self-test.
Shortcut Set
[*] + [#] + [1]: OSD menu default English
[*] + [#] + [3]: OSD menu default Chinese
[*] + [#] + [6]: Quickly recover the default
[*] + [#] + [8]: Check the camera version
[*] + [#] + [9]: Quickly set up inversion
6

USB HD Video Conference Camera User Manual
5GUI Settings
5.1 MENU
Press [MENU] key to display the main menu on
the screen. Use the arrow key to move the cursor
to desired item and press the [HOME] key to
confirm to enter the corresponding sub-menu.
MENU
Exposure
Color
Image
P/T/Z
Noise Reduction
Audio
Setup
Communication Setup
Information
Restore Default
[Home] Enter
[Menu] Exit
5.2 EXPOSURE
When in main menu page, move the cursor to
[Exposure] and press [HOME] key to confirm to
enter the Exposure page as below.
EXPOSURE
Mode
Auto
ExpCompMode
Off
Gain Limit
1
Meter
Average
Backlight
Off
DRC
3
Anti-Flicker
50Hz
Select Item
Change Value
[Menu] Exit
Mode: Auto, Manual, SAE, AAE, Bright.
ExpCompMode (Exposure Compensation Mode):
On, Off (Effective only in Auto mode).
ExpComp (Exposure Compensation Value):
-7 ~ 7 (Effective only in ExpCompMode On).
Gain Limit: 0 ~ 15 (Effective in Auto, SAE, AAE,
Bright mode).
Meter: Average, Center, Bottom, Top (Effective in
Auto, SAE, AAE, Bright mode).
Backlight: On, Off (Effective only in Auto mode).
Bright: 0~17 (Effective only in Bright mode).
Anti-Flicker: Off, 50Hz, 60Hz (Effective in Auto,
AAE, Bright mode).
Iris: F1.8, F2.0, F2.4, F2.8, F3.4, F4.0, F4.8, F5.6,
F6.8, F8.0, F9.6, F11.0, Close (Effective in Manual,
AAE mode).
Shutter: 1/30, 1/60, 1/90, 1/100, 1/125, 1/200,
1/250, 1/350, 1/500, 1/725, 1/1000, 1/1500,
1/2000, 1/3000, 1/4000, 1/6000, 1/10000 (Effective
in Manual, SAE mode).
Gain: 0 ~ 7 (Effective only in Manual mode).
DRC: 0 ~ 8.
5.3 COLOR
When in main menu page, move the cursor to
[Color] and press [HOME] key to confirm to enter
the Color page as below.
COLOR
WB Mode
Auto
AWB Sens
Low
RG Tuning
0
BG Tuning
1
Saturation
100%
Hue
7
Select Item
Change Value
[Menu] Exit
WB-Mode (White Balance Mode): Auto, Indoor,
Outdoor, One Push, Manual, VAR.
AWB Sens (The White Balance Sensitivity): Low,
Middle, High (Effective in Auto, One Push mode).
RG (Red Gain): 0~255 (Effective only in Manual
mode).
BG (Blue Gain): 0~255 (Effective only in Manual
mode).
RG Tuning (Red Gain Tuning): -10 ~ +10 (Effective
in Auto, One Push, VAR mode).
BG Tuning (Blue Gain Tuning): -10 ~ +10 (Effective
in Auto, One Push, VAR mode).
Saturation: 60% ~ 200%.
Hue: 0 ~ 14.
Color Temp: 2500K ~ 8000K (Effective only in VAR
mode).
5.4 IMAGE
7

USB HD Video Conference Camera User Manual
When in main menu page, move the cursor to
[Image] and press [HOME] key to confirm to enter
the Image page as below.
IMAGE
Luminance
7
Contrast
7
Sharpness
15
B&W-Mode
Off
Flip-H
Off
Flip-V
Off
Gamma
Ext
Image Style
Default
Select Item
Change Value
[Menu] Exit
Luminance: 0 ~ 14.
Contrast: 0 ~ 14.
Sharpness: 0 ~ 63.
B&W-Mode: On, Off.
Flip-H: On, Off.
Flip-V: On, Off.
Gamma: Ext, Default, 0.45, 0.5, 0.56, 0.63.
Style: Default, Norm.
5.5 P/T/Z
When in main menu page, move the cursor to
[P/T/Z] and press [HOME] key to confirm to enter
the P/T/Z page as below.
P/T/Z
TOF Focus
On
AF-Sense
High
AF-Zone
Front
Speed By Zoom
On
L/R Set
STD
Display Info
On
Call Preset Speed
18
Pre Zoom Speed
5
Select Item
Change Value
[Menu] Exit
TOF Focus: On, Off.
AF-Sense (Auto Focus Sensitivity): Low, Normal,
High.
AF-Zone (Auto Focus Area): Front, Top, Middle,
Bottom.
Speed By Zoom (The Depth of Field Ratio): On,
Off.
L/R Set: STD, REV.
Display Info: On, Off.
Call Preset Speed: 1 ~ 24.
Pre Zoom Speed: 0 ~ 7.
5.6 NOISE REDUCTION
When in main menu page, move the cursor to
[Noise Reduction] and press [HOME] key to
confirm to enter the Noise Reduction page as
below.
NOISE REDUCTION
2D NR
Auto
3D NR
Auto
Select Item
Change Value
[Menu] Exit
2D NR (2D Noise Reduction): Auto, Off, 1 ~ 5.
3D NR: (3D Noise Reduction): Auto, Off, 1 ~ 8.
8

USB HD Video Conference Camera User Manual
5.7 AUDIO
When in main menu page, move the cursor to
[Audio] and press [HOME] key to confirm to enter
the Audio page as below.
AUDIO
Audio Source
LINE
Select Item
Change Value
[Menu] Exit
Audio Source: Off, LINE, MIC.
NR-Switch: On, Off (Effective only in MIC audio
source)
5.8 SETUP
When in main menu page, move the cursor to
[Setup] and press [HOME] key to confirm to enter
the Setup page as below.
SETUP
Language
English
Video Format
1080P60
USB Mode
BULK
OSD Flip
Off
UVC Standby Mode
Off
Wakeup Pos
Preset 0
Select Item
Change Value
[Menu] Exit
Language: English, Chinese.
Video Format: 1080P60, 1080P50, 1080P30,
720P60, 720P50.
USB Mode: ISOC, BULK.
OSD Flip: On, Off.
UVC Standby Mode: On, Off.
Wakeup Pos: Preset 0, Preset UVC.
5.9 COMMUNICATION SETUP
When in main menu page, move the cursor to
[Communication Setup] and press [HOME] key to
confirm to enter the Communication setup page
as below.
COMMUNICATION SETUP
Protocol
VISCA
V_Address
1
V_AddrFix
Off
Net Mode
Serial
Baudrate
9600
Select Item
Change Value
[Menu] Exit
Protocol: VISCA, PELCO-D, PELCO-P.
V_Address: 1 ~ 7 (Effective only in VISCA
protocol).
V_AddrFix: On, Off (When set to On, the 88 30 01
FF command does not work. Effective only in
VISCA protocol).
P_D_Address: 0 ~ 254 (Effective only in PELCO-D
protocol).
P_P_Address: 0 ~ 31 (Effective only in PELCO-P
protocol).
Net Mode: Serial, Paral (Effective only in VISCA
protocol).
Baudrate: 2400, 4800, 9600, 19200, 38400.
5.10 INFORMATION
When in main menu page, move the cursor to
[Information] and press [HOME] key to confirm to
enter the Information page to check the product
information.
INFORMATION
Version
9.0.03
Model
G56.YX
Date
2022-04-18
AF Version
7.3.25
Select Item
Change Value
[Menu] Exit
The above information is for reference only,
please refer to the real product for the actual
specification.
9

USB HD Video Conference Camera User Manual
5.11 RESTORE DEFAULT
When in main menu page, move the cursor to
[Restore Default] and press [HOME] key to
confirm to enter the restore default page as
below.
RESTORE DEFAULT
Yes
No
Change Value
[Home] OK
[Menu] Exit
Restore: Yes, No.
When selected “Yes” and confirm with [HOME]
key, all parameters will restore to default, include
the IR Remote address and VISICA address.
GUI menu and parameters are subject to change
without notice.
6Troubleshooting
Image
●The monitor shows no image
1) Check that the camera power supply is
connected, the voltage is normal, and the
power indicator is always on.
2) Turn off the power switch to check whether
the camera is self-testing.
3) Check the cable of video platform and TV
whether in correct connection.
●Image jitters aer the camera is properly
connected
1) Check that the camera installation position is
stable.
2) Check that any vibrating machinery or object
near the camera.
Control
●Remote control does not work
1) Check and replace with new batteries.
2) Check that the camera is in normal working
mode.
3) Check the address key of remote control can
match the camera.
●Serial port cannot control
1) Check the protocol, address and bit rate of
the camara are consistent.
2) Check the control cable is properly
connected.
079.79.1101XXX_V1.0
10