Ytc YT-870 Series User manual

Limit Switch Box PRODUCT MANUAL
YT-870/875 SERIES
VERSION 1.01

2 YT-870/875 series
Contents
1. Introduction …………………………………………………………………………………………… 3
1.1 General information for the users ………………………………………………………………. 3
1.2 Manufacturer Warranty …………………………………………………………………………… 3
1.3 Explosion Proof Warning …………………………………………………………………………. 3
2. Product Description ………………………………………………………………………………….. 4
2.1 General …………………………………………………………………………………………….. 4
2.2 Main Features and Functions ……………………………………………………………………. 4
2.3 Label Description ………………………………………………………………………………….. 4
2.4 Product Number …………………………………………………………………………………… 5
2.5 Product Specification ……………………………………………………………………………… 6
2.6 Parts and Assembly ……………………………………………………………………………….. 7
2.7 Dimension – YT-870………………………………………………………………………………. 7
2.8 Dimension – YT-875 ………………………………………………………………………………. 8
2.9 Dimension –Bracket……………………………………………………………………………….. 8
3. Installation ………………………………………………………………………………………………. 9
3.1 Safety ……………………………………………………………………………………………….. 9
3.2 YT-870/875 Installation …………………………………………………………………………… 9
4. Connection– Power………….…………………………………………………………………..…… 9
4.1 Safety ………………………………………………………………………………………………. 9
4.2 Mechanical Type (2 SPDT) ……………………………………………………………………… 10
4.3 Proximity Type (NPN Sensor) …………………………………………………………………… 10
4.4 Mechanical Type (2 DPDT) ………………………………………………………………...…….. 10
5. Adjustment …………………………………………………………………………………………….. 11
5.1 Upper Switch Adjustment………………………………………………………………………… 11
5.2 Lower Switch Adjustment………………………………………………………………………… 11

3 YT-870/875 series
1. Introduction
1.1 General Information for the users
Thank you for purchasing Young Tech Co., Ltd products. Each product has been fully
inspected after its production to offer you the highest quality and reliable performance.
Please read the product manual carefully prior to installing and commission the product.
For the safety, it is important to follow the instructions in the manual. Young Tech Co.,
Ltd will not be responsible for any damages caused by user’s negligence.
The manual should be provided to the end-user.
Any modifications or repairs to the product may only be performed if expressed in this
manual.
The manual can be altered or revised without any prior notice. Any changes in
product’s specification, design, and/or any components may not be printed immediately
but until the following revision of the manual.
The manual should not be duplicated or reproduced for any purpose without prior
approval from Young Tech Co., Ltd, Gimpo-si, South Korea.
1.2 Manufacturer Warranty
For the safety, it is important to follow the instructions in the manual. Manufacturer will
not be responsible for any damages caused by user’s negligence.
Manufacturer will not be responsible for any damages or accidents as a result of any
alteration or modification of the product and its parts. If any alteration or modifications
are necessary, please contact Young Tech Co., Ltd directly.
Manufacturer warrants the product from the date of original purchase of the product for
one (1) year, except as otherwise stated.
Manufacturer warranty will not cover products that have been subjected to abuse,
accidents, alterations, modifications, tampering, negligence, misuse, faulty installation,
lack of reasonable care, repair or service in any way that is not contemplated in the
documentation for the product, or if the model or serial number has been altered,
tampered with, defaced or removed; damages that occurs in shipment, due to act of
God, failure due to power surge, or cosmetic damage. Improper or incorrectly
performed maintenance will void this limited warranty.
For detailed warranty information, please contact Young Tech Co., Ltd – South Korea.
1.3 Explosion Proof Warning
Please ensure the unit is being used and installed within the explosion proof certified
environment.
YT-870/875 series explosion proof grades are Ex db IIC T6 and Ex tb IIIC T85’C and
can be used in zone 1 and 2.

4 YT-870/875 series
Explosion proof type of cables and gaskets should be used, when explosion gases are
present at the installation site.
Power should be turned off completely when opening product’s cover. When opening
the cover, ensure that there is no power remaining in any electrical parts nearby.
Blind plug is required when any port is not being used.
Flameproof certified sealing fitting and/or cable glands must be used. Power cable
must be at least 1mm2or 18AWG.
For external ground terminal, cable rug with surface area of more than 5.5mm2should
be used.
2. Product Description
2.1 General
Limit switch box, YT-870/875 series, monitors and transmits the valve position <open /
close> at the specific point.
2.2 Main Features and Functions
Designed to be Ex db IIC T6 and Ex tb IIIC T85’C explosion proof grades.
Economical price and long product life time.
Available in stainless steel 316 enclosure material.
2.3 Label Description
Fig. 1: YT-870/875 Body Label
A. Model Number: Indicates model number.
B. Explosion Proof: Indicates certified explosion proof grade.
C. Enclosure.: Indicates protection grade
D. Switch Type: Indicates switch type of the unit.
E. Rating: Indicates allowable voltage
F. Serial Number: Indicates unique serial number

5 YT-870/875 series
2.4 Product Number

6 YT-870/875 series
2.5 Product Specification
Model YT-870M
YT-875M
YT-870P
YT-875P
YT-870D
YT-875D
Switching Type Mechanical Switch
x 2 SPDT Proximity Sensor x 2 Mechanical Switch x 2 DPDT
Switch Rating
AC : 250V 3A
125V 5A
DC : 250V 0.2A
125V 0.4A
30V 4A
DC : 12 ~ 24V
(Operating voltage : DC
10~30V)
AC : 125 or 250V 10A
480V 2A
DC : 125V 1/8 HP
125V 1/8 HP
125V 0.5A
125V 0.5A
Enclosure Protection Weather proof, IP67
Terminal 8 points 8 points 12 points
Explosion Proof Ex db IIC T6
Ex tb IIIC T85’C
Ambient Temp. -20 ~ 60’C
Conduit Entry
YT-870 NPT3/4, PF3/4, M20, NPT1/2
YT-875 NPT3/4 (For other connection type, please contact YTC)
Mounting Bracket NAMUR VDI / VDE 3845, ISO5211
Material
gnitsaceiDmunimulA078-TY
613leetSsselniatS578-TY
Weight
)bl3.3(gk5.1078-TY
)bl7.7(gk5.3578-TY

7 YT-870/875 series
2.6 Parts and Assembly
2.7 Dimension – YT-870

8 YT-870/875 series
2.8 Dimension – YT-875
2.9 Dimension – Bracket

9 YT-870/875 series
3. Installation
3.1 Safety
When installing a unit, please ensure to read and follow safety instructions.
Check unit’s specification and ensure to use as specified.
Follow other explosion proof procedures and safety precautions.
Use bypass valve or other supportive equipment to avoid entire system “shut down”.
YT-870 series is designed for explosion area.
Make sure all input and supply pressure to valve, actuator, and other related devices
must be turned off.
3.2 YT-870/875 Installation
1. Assemble limit switch box body with the bracket provided.
2. Align the main shaft of the limit switch box with the stem of the actuator. After the
alignment, tighten the bracket onto the actuator.
4. Connection – Power
4.1 Safety
When installing a unit, please ensure to read and follow safety instructions.
When installing in hazardous and explosive gas area, conduit tube or pressure-proof
packing union must be used.
Before connecting terminal, ensure that the power is off completely. Do not open the
cover when the power is still alive.
Please use ring-type rug to protect against vibration or any other external impact.
Please use twisted cable with conductor section are 1.25mm2and that is suitable for
600V (complying to the conductor table of NEC Article 310.) The outer diameter of the
cable should be between 6.35 ~ 10mm. Use shield wire to protect against electro-
magnetic field and noise.
Please do not install the cable near high noise equipments, such as high-capacity
transformer or motor.

10 YT-870/875 series
4.2 Mechanical Type (2 x SPDT)
4.3 Proximity Type (NPN Sensor – PNP is also available. Please contact YTC)
4.4 Mechanical Type (2 x DPDT)

11 YT-870/875 series
5. Adjustment
5.1 Upper Switch Adjustment
Push down upper switch and turn right or left to required position
5.2 Lower Switch Adjustment
Pull up lower switch and turn right or left to required position.